JVC GR-DVL100, GR-DVL300 specifications 10 EN, Loading/Unloading a Cassette

Page 10

10 EN

Erase protection tab*

Make sure the window side is facing out.

Cassette holder

OPEN/EJECT Switch

 

 

 

 

 

 

 

 

 

 

Cassette holder cover

PUSH HERE

*To Protect Valuable Recordings . . .

.... slide the erase protection tab on the back of

the tape in the direction of “SAVE”. This prevents the tape from being recorded over. To record on this tape, slide the tab back to “REC” before loading it.

GETTING STARTED (cont.)

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

1 Slide and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically.

•Do not touch internal components.

2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.

•When the battery’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery with a fully charged one before continuing.

3 Close the cassette holder cover firmly until it locks into place.

Approximate recording time

Tape

Recording mode

 

 

 

SP

LP

 

 

 

30 min.

30 min.

45 min.

 

 

 

60 min.

60 min.

90 min.

 

 

 

80 min.

80 min.

120 min.

 

 

 

NOTES:

●It takes a few seconds for the cassette holder to open. Do not apply force.

●If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again.

●If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again.

●When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover.

●Closing the cassette holder cover before the cassette holder comes out may cause damage to the camcorder.

●Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or unloading.

●When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out or not. See page 17 for information about recording from the middle of a tape.

●Loosen the Grip Strap if it appears to interfere with the cassette holder cover operation (  pg. 8).

Page 9 Page 11
Image 10
Page 9 Page 11
Contents GR-DVL300 GR-DVL100 Dear Customer It is recommended that youEN3 For optional S-Video cable AC Power Adapter/Charger RemoteAA-V40EA GR-DVL300EA Control Unit BN-V408U Editing CableHow To Attach The Core Filter Release the stoppers on both ends of the Core FilterLithium-ion is vulnerable in colder temperatures PowerCharging the Battery Pack About BatteriesApproximate recording time Using AC PowerTo Detach The Battery Pack For other notes,  pgShoulder Strap Attachment Grip AdjustmentViewfinder Adjustment Tripod MountingDate/Time Settings Press MENU/BRIGHT. The Menu Screen appears10 EN Loading/Unloading a CassetteSet the tape recording mode depending on your preference Recording Mode SettingEN11 Press in the tabs on the lens cap to remove it To Adjust The Brightness Of The Display12 EN While recording is in progressSELF-RECORDING EN13Journalistic Shooting OFF14 EN Snapshot Mode SelectionMotor Drive Mode SnapshotEN15 Zoom Slide the Power Zoom Lever towards T16 EN Zoom OutEN17 When a blank portion is recorded on a tapeProper recording 18 EN Feature Video LightTo brighten the scene when natural lighting is too dim Set Light OFF/AUTO/ON as requiredEN19 Feature Auto FocusFeature Manual Focus To obtain correct focusSee pg Using Menus For Detailed Adjustment20 EN If you have selected , orMenu Screen Explanations EN21 Menu Screen Explanations EN23 Picture Wipe or Dissolve Selection 24 ENFade/Wipe Effects To Deactivate The Selected EffectEN25 Fader And Wipe MenuSlow Slow Shutter To Deactivate The Selected Mode26 EN SlowIris Lock Exposure ControlEN27 To Return To Automatic White Balance White Balance Adjustment28 EN To Change The Tint For RecordingEN29 To Control The Speaker VolumeAvailable only with the remote control provided  pg Playback Zoom and Playback Special Effects30 EN Display Playback SoundEN31 32 EN Playback Basic ConnectionsIf using a VCR . . . go to step If not . . . go to step EN33Connection To a Personal Computer 34 ENMake sure the camcorder and PC are turned off EN35 Connection To a Video Unit Equipped With a DV ConnectorMake sure all units are turned off Dubbing To a VCR 36 ENVCR Recording deck EN37 To use this camcorder as a player38 EN Repeat steps 5 through 7 for additional editingRe-attach the battery compartment cover Installing The BatteriesEN39 40 EN Functions ButtonsFeature Playback Zoom Feature Slow-Motion PlaybackFeature Frame-By-Frame Playback EN4142 EN Feature Playback Special EffectsTo allow you to add creative effects to the playback image SET REMOTE/VCR Code VCR Code ListEN43 You are now ready to try Random Assemble EditingMake Connections JVC VCR equipped with a remote pause connector44 EN VCR other than aboveEN45 Select Scenes46 EN Automatic Editing to VCRDiagnosing VCR/CAMCORDER Timing For More Accurate EditingEN47 Recording deckAdjustment of VCR/CAMCORDER Timing 48 ENEN49 Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing To hear the dubbed sound during playbackCorrective Action Clean the lens and check50 EN Replace with new cassetteEN51 You continue operations 52 ENStandby mode. Make sure Within 5 minutes afterEN53 54 EN Not due to any defect Unit. Effective dots more Than 99.99 %EN55 56 EN EN57 LCD Monitor/Viewfinder Indications During RecordingLCD Monitor/Viewfinder Indications During Playback Head CleaningRequired USE Cleaning Cassette Indications FunctionEN59 60 EN 345 6 7 # $ %EN61 62 EN Cleaning The CamcorderAfter Use EN63 To prevent damage and prolong service lifeTo avoid hazards 64 EN About moisture condensation EN65Serious malfunctioning Icons  pg 66 ENDate/Time Display  pg , 30 LCD monitor/Viewfinder  pg IndicationsEN67 Time Code  pg , 23, 30For General 68 ENFor Digital Video Camera For Connectors EN69Enmemo MEMOEN71 GR-DVL100
Related manuals
Manual 72 pages 53.61 Kb

GR-DVL100, GR-DVL300 specifications

The JVC GR-DVL300 and GR-DVL100 are part of JVC's line of compact and versatile MiniDV camcorders that gained popularity in the early 2000s. Both models are designed to cater to the needs of amateur videographers and provide high-quality video recording in a user-friendly format.

The JVC GR-DVL300 stands out with its progressive scan technology, which enhances video clarity and reduces motion blur. This feature is particularly beneficial when shooting fast-moving subjects, making it a great choice for capturing sports events or action-packed scenes. The GR-DVL300 also boasts a 20x optical zoom lens, which allows users to get closer to their subjects without sacrificing image quality, while a digital zoom feature extends this capability even further.

In contrast, the GR-DVL100 is equipped with a 16x optical zoom and offers slightly fewer advanced features compared to its sibling. However, it remains a robust option for those who prioritize simplicity and ease of use. Both camcorders incorporate JVC’s advanced Image Stabilization technology, reducing camera shake and ensuring smooth footage, even during handheld use.

A key characteristic of both models is their ability to record in both LP (long play) and SP (standard play) modes, providing flexibility in recording time and video quality. Users can choose the mode that best suits their needs, whether they want longer recording durations or superior video quality.

Additionally, both camcorders feature a built-in digital still camera function, allowing users to capture snapshots at 640x480 resolution. This dual functionality adds value for those who want to capture both video and still images without the need for separate devices.

The JVC GR-DVL300 and GR-DVL100 also come with an array of connectivity options, including USB ports for easy transfer of videos to computers as well as S-Video and AV outputs for playback on larger screens. Their compact design makes them portable and convenient for on-the-go shooting, catering to travelers and event documentarians alike.

With their blend of functionality, ease of use, and versatile features, the JVC GR-DVL300 and GR-DVL100 remain noteworthy options for casual filmmakers who want reliable performance and impressive video quality in a compact camcorder package.
Top Page Image Contents