JVC GR-DVL100, GR-DVL300 specifications Power, Charging the Battery Pack, About Batteries

Page 6

6 EN

GETTING STARTED

Power

Battery pack BN-V408U, BN-V416U or BN-V428U

POWER indicator

To AC outlet

AC Power

Adapter/Charger

DC OUT connector

This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.

CHARGING THE BATTERY PACK

1 Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/Charger. Plug the AC Adapter/ Charger’s power cord into an AC outlet. The POWER indicator lights.

2 Attach the battery pack with the mark aligned with the corresponding marks on the AC Power Adapter/Charger. The CHARGE Indicator begins

CHARGE indicator

Battery pack

Fully charging time

 

 

BN-V408U

approx. 1 hr. 30 min.

 

 

BN-V416U (optional)

approx. 2 hrs.

 

 

BN-V428U (optional)

approx. 3 hrs. 20 min.

 

 

blinking to indicate charging has started.

3 When the CHARGE indicator stops blinking but stays lit, charging is finished. Slide the battery and lift off. Remember to unplug the AC Adapter/Charger’s power cord from the AC outlet.

NOTES:

If the protective cap is attached to the battery pack, remove it first.

Perform charging where the temperature is between 10°C and 35°C. 20°C to 25°C is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete.

Charging times noted above are for a fully discharged battery pack.

Charging time varies according to the ambient temperature and the status of the battery pack.

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the camcorder and charging stops.

Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.

If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.

Lithium-ion is vulnerable in colder temperatures.

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion.

WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold temperatures (below 10°C), its usage time becomes shorter and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder. As long as the battery pack itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)

Image 6
Contents GR-DVL300 GR-DVL100 Dear Customer It is recommended that youEN3 For optional S-Video cable AC Power Adapter/Charger RemoteAA-V40EA GR-DVL300EA Control Unit BN-V408U Editing CableHow To Attach The Core Filter Release the stoppers on both ends of the Core FilterLithium-ion is vulnerable in colder temperatures PowerCharging the Battery Pack About BatteriesApproximate recording time Using AC PowerTo Detach The Battery Pack For other notes,  pgShoulder Strap Attachment Grip AdjustmentViewfinder Adjustment Tripod MountingDate/Time Settings Press MENU/BRIGHT. The Menu Screen appears10 EN Loading/Unloading a CassetteRecording Mode Setting Set the tape recording mode depending on your preferenceEN11 Press in the tabs on the lens cap to remove it To Adjust The Brightness Of The Display12 EN While recording is in progressSELF-RECORDING EN13Journalistic Shooting OFF14 EN Snapshot Mode SelectionMotor Drive Mode SnapshotEN15 Zoom Slide the Power Zoom Lever towards T16 EN Zoom OutWhen a blank portion is recorded on a tape EN17Proper recording 18 EN Feature Video LightTo brighten the scene when natural lighting is too dim Set Light OFF/AUTO/ON as requiredEN19 Feature Auto FocusFeature Manual Focus To obtain correct focusSee pg Using Menus For Detailed Adjustment20 EN If you have selected , orMenu Screen Explanations EN21 Menu Screen Explanations EN23 Picture Wipe or Dissolve Selection 24 ENFade/Wipe Effects To Deactivate The Selected EffectEN25 Fader And Wipe MenuSlow Slow Shutter To Deactivate The Selected Mode26 EN SlowExposure Control Iris LockEN27 To Return To Automatic White Balance White Balance Adjustment28 EN To Change The Tint For RecordingEN29 To Control The Speaker VolumeAvailable only with the remote control provided  pg Playback Zoom and Playback Special Effects30 EN Playback Sound DisplayEN31 32 EN Playback Basic ConnectionsIf using a VCR . . . go to step If not . . . go to step EN3334 EN Connection To a Personal ComputerMake sure the camcorder and PC are turned off Connection To a Video Unit Equipped With a DV Connector EN35Make sure all units are turned off 36 EN Dubbing To a VCRVCR Recording deck EN37 To use this camcorder as a player38 EN Repeat steps 5 through 7 for additional editingInstalling The Batteries Re-attach the battery compartment coverEN39 40 EN Functions ButtonsFeature Playback Zoom Feature Slow-Motion PlaybackFeature Frame-By-Frame Playback EN41Feature Playback Special Effects 42 ENTo allow you to add creative effects to the playback image SET REMOTE/VCR Code VCR Code ListEN43 You are now ready to try Random Assemble EditingMake Connections JVC VCR equipped with a remote pause connector44 EN VCR other than aboveEN45 Select Scenes46 EN Automatic Editing to VCRDiagnosing VCR/CAMCORDER Timing For More Accurate EditingEN47 Recording deckAdjustment of VCR/CAMCORDER Timing 48 ENEN49 Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing To hear the dubbed sound during playbackCorrective Action Clean the lens and check50 EN Replace with new cassetteEN51 You continue operations 52 ENStandby mode. Make sure Within 5 minutes afterEN53 54 EN Not due to any defect Unit. Effective dots more Than 99.99 %EN55 56 EN EN57 LCD Monitor/Viewfinder Indications During RecordingLCD Monitor/Viewfinder Indications During Playback Head CleaningRequired USE Cleaning Cassette Indications FunctionEN59 60 EN 345 6 7 # $ %EN61 Cleaning The Camcorder 62 ENAfter Use To prevent damage and prolong service life EN63To avoid hazards 64 EN EN65 About moisture condensationSerious malfunctioning Icons  pg 66 ENDate/Time Display  pg , 30 LCD monitor/Viewfinder  pg IndicationsEN67 Time Code  pg , 23, 3068 EN For GeneralFor Digital Video Camera For Connectors EN69Enmemo MEMOEN71 GR-DVL100
Related manuals
Manual 72 pages 53.61 Kb

GR-DVL100, GR-DVL300 specifications

The JVC GR-DVL300 and GR-DVL100 are part of JVC's line of compact and versatile MiniDV camcorders that gained popularity in the early 2000s. Both models are designed to cater to the needs of amateur videographers and provide high-quality video recording in a user-friendly format.

The JVC GR-DVL300 stands out with its progressive scan technology, which enhances video clarity and reduces motion blur. This feature is particularly beneficial when shooting fast-moving subjects, making it a great choice for capturing sports events or action-packed scenes. The GR-DVL300 also boasts a 20x optical zoom lens, which allows users to get closer to their subjects without sacrificing image quality, while a digital zoom feature extends this capability even further.

In contrast, the GR-DVL100 is equipped with a 16x optical zoom and offers slightly fewer advanced features compared to its sibling. However, it remains a robust option for those who prioritize simplicity and ease of use. Both camcorders incorporate JVC’s advanced Image Stabilization technology, reducing camera shake and ensuring smooth footage, even during handheld use.

A key characteristic of both models is their ability to record in both LP (long play) and SP (standard play) modes, providing flexibility in recording time and video quality. Users can choose the mode that best suits their needs, whether they want longer recording durations or superior video quality.

Additionally, both camcorders feature a built-in digital still camera function, allowing users to capture snapshots at 640x480 resolution. This dual functionality adds value for those who want to capture both video and still images without the need for separate devices.

The JVC GR-DVL300 and GR-DVL100 also come with an array of connectivity options, including USB ports for easy transfer of videos to computers as well as S-Video and AV outputs for playback on larger screens. Their compact design makes them portable and convenient for on-the-go shooting, catering to travelers and event documentarians alike.

With their blend of functionality, ease of use, and versatile features, the JVC GR-DVL300 and GR-DVL100 remain noteworthy options for casual filmmakers who want reliable performance and impressive video quality in a compact camcorder package.