JVC GR-DVL100 specifications 64 EN

Page 64

64 EN

Cassettes

To properly use and store your cassettes, be sure to read the following cautions:

1. During use . . .

.... make sure the cassette bears the Mini DV mark.

.... be aware that recording onto prerecorded

tapes automatically erases the previously recorded video and audio signals.

.... make sure the cassette is positioned properly

when inserting.

.... do not load and unload the cassette

repeatedly without allowing the tape to run at all. This slackens the tape and can result in damage.

.... do not open the front tape cover. This exposes

the tape to fingerprints and dust.

2. Store cassettes . . .

.... away from heaters or other heat sources.

.... out of direct sunlight.

.... where they won’t be subject to unnecessary

shock or vibration.

.... where they won’t be exposed to strong

magnetic fields (such as those generated by motors, transformers or magnets).

.... vertically, in their original cases.

LCD Monitor

1.To prevent damage to the LCD monitor, DO NOT . . .

.... push it strongly or apply any shocks.

.... place the camcorder with the LCD monitor on the bottom.

2.To prolong service life . . .

.... avoid rubbing it with coarse cloth.

3.Be aware of the following phenomena for LCD monitor use.

These are not malfunctions:

While using the camcorder, the surface around the LCD monitor and/or the back of the LCD monitor may heat up.

If you leave power on for a long time, the surface around the LCD monitor becomes hot.

Main Unit

1. For safety, DO NOT . . .

.... open the camcorder’s chassis.

.... disassemble or modify the unit.

.... short-circuit the terminals of the battery pack.

Keep it away from metallic objects when not in use.

.... allow inflammables, water or metallic objects

to enter the unit.

.... remove the battery pack or disconnect the

power supply while the power is on.

.... leave the battery pack attached when the

camcorder is not in use.

CAUTIONS (cont.)

2. Avoid using the unit . . .

.... in places subject to excessive humidity or dust.

.... in places subject to soot or steam such as near

a cooking stove.

.... in places subject to excessive shock or

vibration.

.... near a television set.

.... near appliances generating strong magnetic or

electric fields (speakers, broadcasting anten- nas, etc.).

.... in places subject to extremely high (over 40°C

or 104°F) or extremely low (under 0°C or 32°F) temperatures.

3. DO NOT leave the unit . . .

.... in places of over 50°C (122°F).

.... in places where humidity is extremely low

(below 35%) or extremely high (above 80%).

.... in direct sunlight.

.... in a closed car in summer.

.... near a heater.

4.To protect the unit, DO NOT . . .

.... allow it to become wet.

.... drop the unit or strike it against hard objects.

.... subject it to shock or excessive vibration during transportation.

.... keep the lens directed at extremely bright objects for long periods.

.... expose the lens to direct sunlight.

.... carry it by holding the LCD monitor or the viewfinder.

.... swing it excessively when using the shoulder strap or the grip.

5.Dirty heads can cause the following problems:

•No picture during playback.

•Blocks of noise appear during playback. •During recording, the Head Clog Warning

indicator “” appears.

In such cases, use an optional cleaning cassette. Insert it and play back. If the cassette is used more than once consecutively, damage to the video heads may result. After the camcorder plays back for about 20 seconds, it stops automatically. Also refer to the cleaning cassette’s instructions.

If, after using the cleaning cassette, the problems still exist, consult your nearest JVC dealer. Mechanical moving parts used to move the video heads and video tape tend to become dirty and worn out over time. In order to maintain a clear picture at all times, periodic check-ups are recommended after using the unit for about 1,000 hours. For periodic check-ups please consult your nearest JVC dealer.

Image 64
Contents GR-DVL100 Dear Customer It is recommended that youPower Sources Power Cord ProtectionPower Lines Grounding or PolarizationAccessories CleaningDamage Requiring Service Replacement PartsSafety Precautions Make sure you only use cassettes with the Mini DV markAC Power Adapter/Charger Remote Control Unit AA-V40U RM-V715U Shoulder Strap AAA R03 Battery xAutomatic Demonstration Power Charging the Battery PackLithium-ion is vulnerable in colder temperatures About BatteriesUsing the Battery Pack Using AC PowerTo Detach The Battery Pack Approximate recording timeGrip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings EN1112 EN Loading/Unloading a CassetteSet the tape recording mode depending on your preference Recording Mode SettingEN13 14 EN To Adjust The Brightness Of The DisplayTo Stop Recording Power Switch Position Allows you to switch off the camcorderEN15 Journalistic ShootingSnapshot Mode Selection Motor Drive Mode16 EN SnapshotEN17 Slide the Power Zoom Lever towards T 18 ENZoom Zoom OutEN19 When a blank portion is recorded on a tapeProper recording Feature Video Light To brighten the scene when natural lighting is too dim20 EN Set Light OFF/AUTO/ON as requiredFeature Auto Focus Feature Manual FocusEN21 To obtain correct focus22 EN See pgIf you have selected , or Go to stepMenu Screen Explanations EN23Menu Screen Explanations EN25 26 EN Fade/Wipe EffectsPicture Wipe or Dissolve Selection To Deactivate The Selected EffectFader And Wipe Menu EN27Menu 28 EN To Deactivate The Selected ModeProgram AE With Special Effects Iris Lock Exposure ControlEN29 White Balance Adjustment 30 ENTo Return To Automatic White Balance To Change The Tint For RecordingLoad a tape  pg Set the Power Switch to To Control The Speaker VolumeAvailable only with the remote control provided  pg EN3132 EN Display Playback SoundEN33 34 EN VCRIf using a VCR . . . go to step If not . . . go to step EN3536 EN Connection To a Personal ComputerEN37 Connection To a Video Unit Equipped With a DV ConnectorMake sure all units are turned off 38 EN Dubbing To a VCRCore filter reduces interference YTU94146A S-Video cableEN39 To use this camcorder as a playerInstalling The Battery RM-V700U, optional Installing The Batteries RM-V715U, provided40 EN EN41 Functions Buttons42 EN Feature Playback ZoomPress Play 4 to find the scene of interest EN43 SET REMOTE/VCR CodeVCR Recording deck You are now ready to try Random AssembleJVC VCR equipped with a remote pause connector 44 ENMake Connections VCR other than aboveEN45 Select Scenes46 EN Automatic Editing to VCRFor More Accurate Editing EN47Diagnosing VCR/CAMCORDER Timing Vcrtv Recording deckAdjustment of VCR/CAMCORDER Timing 48 ENSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg Audio DubbingEN49 To hear the dubbed sound during playback50 EN Insert EditingPower, or some other Corrective Action52 EN Slow Shutter mode is EN5354 EN Video mode For video playback EN55Play, Rewind and Fast- Forward functions do not work An unusual mark appears56 EN EN57 LCD Monitor/Viewfinder Indications During RecordingLCD Monitor/Viewfinder Indications During Playback Indications FunctionAppears when the date/time is not set  pg For replacementMode  pg Appears if a tape in another format is loaded60 EN 345 6 7 # $ %Snapshot Mode Button Video Light Switch  pgTally Lamp  pg Power Lamp EN61Cleaning The Camcorder Press Battery Release and remove the battery pack62 EN After UseTo prevent damage and prolong service life Temperature Range SpecificationsEN63 To avoid hazards64 EN About moisture condensation EN65Serious malfunctioning 66 EN  pg , 9Date/Time Display  pg , 32 Icons  pgEN67 For General 68 ENFor Digital Video Camera For Connectors EN69Memo Memo GR-DVL100
Related manuals
Manual 72 pages 26.24 Kb

GR-DVL100 specifications

The JVC GR-DVL300 and GR-DVL100 are part of JVC's line of compact and versatile MiniDV camcorders that gained popularity in the early 2000s. Both models are designed to cater to the needs of amateur videographers and provide high-quality video recording in a user-friendly format.

The JVC GR-DVL300 stands out with its progressive scan technology, which enhances video clarity and reduces motion blur. This feature is particularly beneficial when shooting fast-moving subjects, making it a great choice for capturing sports events or action-packed scenes. The GR-DVL300 also boasts a 20x optical zoom lens, which allows users to get closer to their subjects without sacrificing image quality, while a digital zoom feature extends this capability even further.

In contrast, the GR-DVL100 is equipped with a 16x optical zoom and offers slightly fewer advanced features compared to its sibling. However, it remains a robust option for those who prioritize simplicity and ease of use. Both camcorders incorporate JVC’s advanced Image Stabilization technology, reducing camera shake and ensuring smooth footage, even during handheld use.

A key characteristic of both models is their ability to record in both LP (long play) and SP (standard play) modes, providing flexibility in recording time and video quality. Users can choose the mode that best suits their needs, whether they want longer recording durations or superior video quality.

Additionally, both camcorders feature a built-in digital still camera function, allowing users to capture snapshots at 640x480 resolution. This dual functionality adds value for those who want to capture both video and still images without the need for separate devices.

The JVC GR-DVL300 and GR-DVL100 also come with an array of connectivity options, including USB ports for easy transfer of videos to computers as well as S-Video and AV outputs for playback on larger screens. Their compact design makes them portable and convenient for on-the-go shooting, catering to travelers and event documentarians alike.

With their blend of functionality, ease of use, and versatile features, the JVC GR-DVL300 and GR-DVL100 remain noteworthy options for casual filmmakers who want reliable performance and impressive video quality in a compact camcorder package.