JVC LYT0278-001A Manual White Balance Operation, Enter Setting, To Change The Tint For Recording

White paper

Select Dial Power Switch

EN37

Manual White Balance Operation

If the camera is operating in PRO. mode, perform a Manual White Balance when shooting under various types of lighting.

1 SELECT OPERATION MODE Follow steps 1 through 4 of the white balance adjustment (☞ pg. 36), select “ MAN.”.

2 SET MANUAL WHITE BALANCE Hold a sheet of plain white paper in front of the subject. Adjust zoom or position yourself so that the white paper fills the screen.

3 ENTER SETTING

Press the Select Dial until the begins blinking.

•When the setting is completed, the stops blinking.

4 EXIT MANUAL WHITE BALANCE AD- JUSTMENT

Press the Select Dial. The indication “W.BAL.”		RECORDING
changes to “PRO.” and only the Manual White
Balance indicator	is displayed.

Display

	FOCUS	AUTO
	EXPOSURE	AUTO
4	W. BALANCE	AUTO
	FADER	OFF
	/ WIPE
	P. AE	OFF
	/ EFFECT

Manual Mode Item Menu

To Change The Tint For Recording . . .

.... in step 2, substitute coloured paper for white. The

white balance is adjusted based on the colour, changing the tint. Red paper — deeper green; blue paper — orange; yellow paper — deeper purple.

NOTES:

RETURN

PRO.

Manual White

Balance Adjustment

●In step 2, it may be difficult to focus on the white paper

in some circumstances. In such a case, adjust focus manually (☞ pg. 33).

●A subject can be shot under various types of lighting conditions indoors (natural, flourescent, candlelight, etc.). Because the colour temperature is different depending on the light source, the tint of the subject will differ depending on the white balance settings. Use this function for a more natural result.

●Once you adjust white balance during Manual White Balance operation, the setting is retained even if the power is turned off or the battery removed.