JVC GR-DVL145 specifications Normal Playback, To Control The Speaker Volume

PLAYBACK EN 19

Play/Pause Button (4/6)	Power Zoom Lever
	(VOL.)
Rewind Button (2)
Stop Button (5)	Fast-Forward
	Button (3)

Speaker

Normal Playback

1 Load a tape (
pg. 12).

2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch. To start playback, press 4/6.

•To stop playback, press 5.

•Press 2to rewind, or 3to fast-forward the tape during Stop mode.

To Control The Speaker Volume . . .

..... slide the Power Zoom Lever (VOL.) towards “+”

to turn up the volume, or towards “–” to turn down the volume.

NOTES:

●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “PLAY”.

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (
pg. 20).

●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.

●LCD monitor/viewfinder indications:

•When power is supplied from a battery: the “ ” battery pack remaining power indicator is displayed.

When power is supplied from an AC outlet: “ ” does not appear.

•During Stop mode, none of the indications are displayed.

●When a cable is connected to the AV connector, the sound is not heard from the speaker.

Still Playback: Pauses during playback.

1)Press 4/6during playback.

2)To resume normal playback, press 4/6again.

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

●When 4/6is pressed, the image may not pause immediately while the camcorder stabilises the still image.

Shuttle Search: Allows high-speed search in either direction.

1)Press 3for forward or 2for reverse search during playback.

2)To resume normal playback, press 4/6.

●During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Frame-By-Frame Playback: Allows frame-by-frame search.

1)Engage Still Playback.

2)Rotate the MENU/BRIGHT wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for

reverse Frame-By-Frame Playback during Still Playback.

●To resume normal playback, press 4/6.

ATTENTION

During Shuttle Search, parts of the picture may not be clearly visible, particularly on the left side of the screen.