JVC GR-DVL257 62 EN, Make Connections, JVC VCR equipped with a remote pause connector

62 EN USING THE REMOTE CONTROL UNIT (cont.)

Connector cover**

To S
To AV
To JLIP***
or EDIT***
Audio/Video	S-Video
cable	cable
(provided)	(optional)

Editing cable

To AUDIO, VIDEO*

and -IN connectors

“Y/C”/“CVBS”

video out

If your VCR has the select switch SCART connector,

use the provided cable adapter.

To Remote PAUSE or R.A.EDIT

VCR

MAKE CONNECTIONS

Also refer to pg. 22 and 23.

1 A JVC VCR equipped with a remote pause connector . . .

... connect the editing cable to the Remote PAUSE connector.

A JVC VCR not equipped with a remote pause

connector but equipped with an R.A. EDIT connector . . .

... connect the editing cable to the R.A.EDIT connector.

A VCR other than above . . .

... connect the editing cable to the remote control’s PAUSE IN connector.

2 Insert a recorded tape into the camcorder. Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL557/ DVL555/DVL357/DVL355 only), then set the Power

Switch to “ ” while pressing down the Lock Button located on the switch.

3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).

NOTES:

●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

To PAUSE IN

DISPLAY

TV

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen ( pg. 50).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen ( pg. 50).

•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 50). Or, press DISPLAY on the remote control (provided).

*Connect when an S-Video cable is not used.

**When connecting cables, open this cover.

***JLIP :GR-DVL257/DVL150

EDIT :GR-DVL557/DVL555/DVL357/DVL355

For GR-DVL257 Owners:

ATTENTION FOR EDITING CABLE

Make sure you connect the end with the core filter (plug which has 3 rings around the pin) to the camcorder.

●Set the video out select switch of the cable adapter as required:

Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an S-Video cable and audio/video cable.