JVC GR-AXM768EG instruction manual Fade/Wipe, Advanced Features, Engage FADE- or Wipe Standby Mode

22EN

[Ex. : Fader]

RECORDING

Fade/Wipe

AdvancedFeatures(cont.)

Fade-in

Fade-out

Function indication

4EFFECT

These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end or when you enter Record-Standby mode.

ENGAGE FADE- OR WIPE-

STANDBY MODE

1 Press EFFECT to cycle through the modes as shown to the left. Once the desired mode appears, it is selected and reserved.

MOSAIC

After 2 sec.

•The selected mode’s name and its indication are displayed for approx. 2 seconds. Then the name disappears, and only the indication remains.

START OR END RECORDING

LCD monitor or viewfinder

BK	BK FADER
		MOSAIC
		SHUTTER
		SLIDE
OFF	OFF
(No indication)

2 Press Recording Start/Stop Button to activate fade-in/ out or wipe-in/out.

TO CANCEL FADE- OR WIPE- STANDBY MODE

3 Press EFFECT repeatedly until “OFF” appears.

•“OFF” is displayed for approx. 2 seconds and the fade/wipe-standby mode is cancelled.

BK FADER

Fades in/out to a black screen.

MOSAIC (Fader)

Gradually turns/returns the picture into/from a mosaic pattern.

SHUTTER (Wipe)

A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the centre.

SLIDE (Wipe)

A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.

EFFECT

Recording

Start/Stop

Button

NOTES:

●Pressing and holding the Recording Start/Stop Button allows you to record a black blank screen or a mosaic pattern if Mosaic Fader is selected.

●The screen becomes slightly reddish when the Fade/ Wipe is used with Sepia (☞ pg. 21).

●With the Electronic fog filter mode (☞ pg. 21) engaged, when Fader (not Mosaic) is used, the image fades in/out to a white screen.