JVC GR-AXM768EG No power is supplied, Power suddenly goes off, Doesn’t come back on by itself

Page 49

50EN

TROUBLESHOOTING

SYMPTOMPOSSIBLE CAUSE(S)

POWER

No power is supplied.

The battery pack has not been attached correctly

 

(pg. 4).

 

The battery pack is not charged (pg. 4).

 

The power supply has not been correctly connected

 

(pg. 5).

The power suddenly goes off and

The battery pack has completely discharged.

doesn’t come back on by itself.

Remove the cassette and disconnect the power source,

 

then after a few minutes, try turning the power back on. If

 

it still doesn’t come on, consult your nearest JVC dealer.

RECORDING

Recording cannot be performed.

Make sure the Erase Protection tab is in the position that

 

allows recording. If not, slide the tab. Some cassettes have

 

removable tabs. If the tab has been removed, cover the

 

hole with adhesive tape.

Recording does not start.

The camcorder Power Switch has not been set to

 

“CAMERA” (pg. 12).

 

 

PLAYBACK

 

The tape is running, but there’s no

The TV has not been set to its VIDEO mode.

playback picture.

If A/V connection is used, the TV’s VIDEO/TV Switch has

 

not been set to VIDEO.

 

The RF unit has not been set to the correct channel.

Playback picture is blurred or

The video heads are dirty or worn out. Consult your

interrupted.

nearest JVC dealer for head cleaning or replacement.

 

 

The counter indication is blurred

This is normal.

during Still playback.

 

 

 

TAPE TRANSPORT

 

The tape stops during fast-forward

The Counter Memory Function has been activated

or rewind.

(pg. 38).

Rewinding or fast-forwarding cannot

The tape is already fully wound on one reel or the other.

be performed.

 

Image 49
Contents Safety Precautions Logical Choice Supply Power PowerAttach Battery Pack Detach Battery PackAA-V15EG DC OUTClose Cover Insert BatteryAccess Menu Screen Date/Time SettingSET Recording Mode Recording Mode SettingMenu Loading/Unloading a Cassette Viewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Adjust LengthTripod Mounting Attach StrapBasic Recording Enter RECORD-STANDBY ModeLoad a Cassette Start ShootingStop Recording Tape remaining time indicatorEN Recording Basic Recording Power Switch Start/Stop ButtonInterface shooting Journalistic shootingBrightness control Zoom-in Zoom-out Zoom indicator bar EN Recording Basic FeaturesPower Zoom button Zoom Speed Setting Menu Zooming Speed 1 4 in order of speedRetake R/F FeaturePurpose OperationFeature Purpose Operation Basic FeaturesSet the Light OFF/AUTO/ON Switch as required Light OFF/AUTO/ONDisplay Select Dial DATE/TIMEDate/Time/Character Insert Programme AE With Special Effects Recording Advanced FeaturesAfter 1 sec MarkMode DialViewfinder indication Engage FADE- or Wipe Standby Mode Advanced FeaturesTo Cancel FADE- or WIPE- Standby Mode Fade/WipeSelect Super Lolux Mode Engage Wide ModeWide Super LoLuxGain UpTitle Select Preset TitleTitle display Close Menu END Character SettingMenu Jog Dial Menu Screen Access Menu Screen Using Menu For Detailed AdjustmentMake Setting END SettingOn Next Menu Screen ExplanationsREC Time To darken the image To brighten the imageAuto Focus FocusingFocus Menu Screen Manual Focus Screen END Adjustment of FocusAccess White Balance Menu Screen Manual White Balance Adjustment M.W.BSelect White Balance B. Menu ScreenB. Menu Screen Select Dial Menu Jog Dial INT. Time Menu IndicatorREC Time Menu INT. TimeTime-Lapse Release Animation ModeSET Interval Between Recordings SET Recording TimeRewind or Fast-forward the tape Basic PlaybackPlay Back Stop PlaybackAdjust Volume Speaker volume controlBright Volume TrackingCounter R/M PLAY/PAUSE REW FF Stop Feature FeaturesCassette Adapter Using The Cassette Adapter ENInsert Cassette in Adapter Play Back on Connected VCRConnect Camcorder to VCR Basic ConnectionsConnect Camcorder to TV Tape Dubbing Power SwitchReplace Battery Holder Pull OUT Battery HolderRM-V700U provided FunctionsRec Time Indicator Interval Timer IndicatorSTART/STOP Viss INT. Time REC Time SET Remote to Operate VCR Random Assemble Editing R.A.EditOperate VCR Prepare Camcorder Connect toPrepare VCR Cont Begin Automatic Editing Engage VCR’S RECORD-PAUSE ModeEND Automatic Editing VCR REC Stby ON/OFFTape Counter LCD monitor or viewfinder Counter R/MREW Play Audio dubbing indicatorDUB PausePower suddenly goes off No power is suppliedDoesn’t come back on by itself Recording cannot be performedReview or Retake mode Indicators and the pictureAn error number i.e. E03 appears Tape won’t eject52EN Indicators 54EN Avoid using the unit For safety, do notDuring use To avoid hazardClean LCD Monitor Clean ExteriorClean Lens Clean ViewfinderSpecifications