JVC GR-DV808 manual Tape Remaining Indicator, Brightness Control, Viewfinder Indications

Page 19

NOTES:

Be careful not to cover the camera sensor; built-in here is the sensor necessary for shooting.

If 5 minutes elapse in the Record-Standby mode, power shuts off automatically to conserve energy and protect the heads. To turn the camcorder on again, push back and pull out the viewfinder again. As long as you don’t take out the tape you were using or play it back, you can continue from where you left off with no noticeable break on the recorded video.

When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape.

Continue recording from where you stop so there

are no gaps by following “Recording from the middle of a tape” (pg. 20).

Record-Standby means that a tape is loaded and the camcorder is ready to record.

During recording, sound is not heard from the speaker. If you want to hear the sound, connect optional headphones to the headphones jack. The sound volume at this point is the same as the level it was adjusted during playback.

To make the indications disappear, press and hold the IND.ON/OFF button for more than approx. 1 second. However, it is impossible to remove the

tape running indicator “ 444” and warning indications and so on (pg. 79).

When the battery remaining power indicator

appears as , that means the battery power is close to nil. When the battery power is exhausted, power turns off automatically.

EN19

Tape Remaining Indicator

The time remaining on the tape is automatically monitored and displayed (pg. 77). When the tape ends, “TAPE END” appears. If the indications are turned off, the tape remaining indicator appears when remaining time reaches 2 minutes.

Display

90 min

REC

2 min 3 min 89 min

blinking

1 min

 

0 min

 

blinking blinking

Brightness Control

You can adjust the brightness of the display by rotating the Select Dial.

BRIGHT – – – – 6 – – – –

1 ADJUST BRIGHTNESS

Rotate the Select Dial until the brightness indicator moves and the display reaches its appropriate brightness.

•The brightness indication appears on the display.

Viewfinder Indications

You can make the Viewfinder indications appear/ disappear.

1 PRESS IND.ON/OFF BUTTON When you do not want the indications to appear, press the IND.ON/OFF button for longer than approximately 1 second. Certain indications disappear.

Press again for longer than approx. 1 second to make the indicaitons reappear.

NOTE:

It is impossible to make the tape running indicator and warnings etc. disappear from the viewfinder. For the indications that can be removed, pg. 77.

Image 19
Contents GR-DV808 It is recommended that you Dear CustomerConnection to the mains supply in the United Kingdom Safety Precautions VIDEO/AUDIO cable Battery pack BN-V607UDC cord Grip/Hand strapRM-V712U DVM-30 M-DV30ME Lithium battery CR2025 for remote control unitVideo Area Audio Area Sub-Code AreaITI Insert and Tracking Information Area Contents Charging The Battery Pack Close Battery Cover Installing The Battery PackOpen Battery Cover Insert Charged BatteryConnect DC Cord to AC Charger Station Using The Battery HolderSupply Power to AC Charger Station Indoor UseDisplay Date/Time SettingsSelect Operation Mode Input Date and TimeTo protect valuable recordings Loading/Unloading a CassetteOpen Cassette Cover INSERT/REMOVE TapeSET Recording Mode Recording Mode SettingSelect Dial Attach Grip Strap to SUB Hand Strap Eyelet Adjust LengthGrip Strap Attachment Attach Grip Strap to Hand Strap EyeletTurn on Camcorder Dioptre AdjustmentAdjust Dioptre Tripod MountingInsert Battery in Holder Remote Control UnitInstalling The Battery Pull OUT Battery HolderFunction Operation ModePower Dial Position Self-Timer Playback PlaySelect Dial IND.ON/OFF button Start RecordingStop Recording END RecordingViewfinder Indications Tape Remaining IndicatorAdjust Brightness Brightness ControlRecording From The Middle Of a Tape Time Code When blank portion is recorded on a tapeProper recording Zoom EN RecordingSelect Function Displaying The Date And Time During RecordingSelect Dial Menu button IND.ON/OFF button Scene 5-second recording Engage 5S ModeDissolves during 5 second mode recording To Take a Snapshot In The 5-Second ModeEND SELF-TIMER Recording Self-TimerEngage SELF-TIMER Mode Stop SELF-TIMER RecordingTake Snapshot Access System MenuSelect Snapshot Mode SnapshotMotor Drive mode Select Dial Menu button Display MenusClose Recording Menu Recording Menu allows you to set these functionsWide Mode REC Mode Recording modeDIS Digital Image Stabilizer Zoom Zoom magnificationClose System Menu System MenuPhoto Mode FADE/WIPE Effects Accessmenu Manual Mode ItemAccess FADER/WIPE Menu To Cancel FADE/WIPE EffectsWH , BK , , B W Fades and WipesExample WH Fader White Example Wipe ScrollResume Recording Picture Wipe/DissolveP and P of the Fader/Wipe Menu Random Variations Fader and Wipe Menu Random Fader and Wipe MenuAE/Effects Disable P.AE/EFFECTSlow Slow Shutter To Change To Auto Focus Manual Focus AdjustmentAccess Manual Focus Adjust FocusTo Return To Automatic Exposure Control Adjust ExposureExposure Control Brightness control of the displayTo Return To Automatic Iris Control Iris LockIris To Return To Automatic White Balance White Balance AdjustmentAccessment White Balance Adjust Closement White Balance AdjustTo Change The Tint For Recording Enter SettingExit Manual White Balance Adjustment Manual White Balance OperationEND Playback DisplayRewind Tape Viewing RecordingTo Perform High-Speed Search Still PlaybackEND Zoom Playback ZoomActivate Zoom Locatescene Portion of MagnifiedPlayback Effects Accessmenu Playback Effect SelectPlayback Menu allows you to set the following functions Access Playback MenuPlayback Menu Close MenuDisplaying the Date During Playback Playback SoundDisplaying The Time Code During Playback Turn on Power VCR/TV Connection when connecting directly to the camcorderSelect TV’S Video Mode Confirm POWER-OFF Status VCR/TV Connection using AC Charger StationAttach and Lock Basic Connections Connect AC Charger Station to TV or VCR To DV in connector Connection To a Video Unit Equipped With a DV ConnectorDigital Printer Attach Camcorder to AC Charger Station Supply PowerRecording deck DubbingMake Connections Start Playback Pause RecordingMake Connections Digital DubbingOperate VCR Brand SettingExecute FADE/WIPE in if Necessary Random Assemble EditingUSE P.AE/EFFECT if Necessary USE Fade Wipe on Scene Transition if NecessaryPress FADE/WIPE Start Editing Engagemode Vcrs RECORD-PAUSEStop Editing Prepare for R.A. Edit Play Back Dubbed Scene For More Accurate EditingChoose a Scene Recording deck Select Dial Input Correction DataEngage Audio DUB Standby Audio DubbingFind EDIT-IN Point Pause During Dubbing Stop DubbingRecording Sound Display Output Sound Troubleshooting Possible Causes Troubleshooting Phones connecto Viewfinder Camcorder’s functions Clean Viewfinder Cleaning The CamcorderRemove Power Supply Clean LensCamcorder Bottom of camcorder Battery cover open switch Battery pg Power dial pgZoom switch T/W pg OPEN/EJECT switch pgAC Charger Station Function Indications During RecordingIndications During Playback Indications Function During use To avoid hazardStore cassettes Do not leave the unit For safety, do notAvoid using the unit Dirty heads can cause the following problemsVideo GeneralAudio Audio ConnectorsOutput power VideoOn-screen display Colour temperatureAC Charger Station Auto focusIndex Memo Memo GR-DV808

GR-DV808 specifications

The JVC GR-DV808 is a versatile MiniDV camcorder that gained popularity for its innovative features and user-friendly design when it was released. This compact device encapsulates the essence of portable filming without compromising on video quality. With its sleek design, the GR-DV808 appeals significantly to amateur filmmakers and casual users alike, providing a variety of functionalities for capturing memories in rich, vivid detail.

One of the standout features of the GR-DV808 is its advanced image capture capabilities. It is equipped with a 1/4-inch CCD sensor that delivers impressive video resolution, ensuring that footage recorded is sharp and vibrant. The camera supports the MiniDV format, which allows for high quality digital video recording with excellent color reproduction and clarity.

The GR-DV808 includes a 20x optical zoom lens, offering exceptional versatility in various shooting situations. This optical zoom allows users to get closer shots without sacrificing quality, making it ideal for wildlife photography and events where you may be filming from a distance. Additionally, the camcorders come with a 500x digital zoom feature, though it is primarily recommended to utilize the optical zoom for clearer images.

In terms of convenience, JVC incorporated a 2.5-inch color LCD monitor that provides a clear view of the subject while recording or reviewing footage. The flexible monitor design allows for various angles, making shooting at odd positions easier. Moreover, the camcorder features a built-in speaker and microphone, enhancing the functionality for playback and sound capture.

The GR-DV808 also supports digital video editing, facilitated by its FireWire (IEEE 1394) connectivity. This capability allows users to transfer footage to a computer for editing and sharing with ease. Along with its compact size, the camcorder accommodates long recording sessions with its efficient power consumption, making it a practical choice for on-the-go videography.

Lastly, the camcorder offers various shooting modes and effects, enhancing ease of use and creative expression. Features like digital image stabilization help reduce the effect of shaky hands for smoother playback, while programmable scene modes allow users to adapt to different lighting conditions. Whether capturing weddings, family events, or travel adventures, the JVC GR-DV808 remains a significant choice for those valuing quality and convenience in a portable digital camcorder.