JVC GR-DV808 manual Troubleshooting

Page 68

68EN

TROUBLESHOOTING

If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer.

SYMPTOM

1.No power is supplied.

2.“SET DATE/TIME!” appears.

3.Recording cannot be performed.

4.There is no playback picture.

5.Some functions are not available using the MENU button.

6.Some functions are not available using the Select Dial.

7.The focus does not adjust automatically.

8.The cassette won’t load properly.

9.Play, Rewind and Fast- Forward functions don’t work.

POSSIBLE CAUSES

1.•The power is not connected properly.

•The battery is dead.

•The viewfinder is not pulled out when recording.

2.•The built-in rechargeable clock lithum battery is discharged and the previ- ously set date/time is erased.

3.•The tape’s record safety tab is set to “SAVE”.

•The Power Dial is set to “PLAY”.

•“TAPE END” appears.

•The cassette's cover is open.

4.•The camcorder is not getting power, or some other malfunction exists.

5.•The Power Dial is set to “ A ”.

6.•The Power Dial is set to “ A ”, “5S” or “”.

7.•Focus is set to “MANUAL”. •The recording was done in a dark place, or the contrast

was low.

•The lens is dirty or covered with condensation.

8.•The cassette is in the wrong position.

•The battery’s charge is low.

9.•The Power Dial is not set to

“PLAY”.

CORRECTIVE ACTION

1.• Connect the AC Charger Station securely (☞ pg. 10).

•Replace the dead battery

with a fully charged one (☞ pg. 9).

•Pull out the viewfinder.

2.• Connect the camcorder to an AC outlet using the AC Charger Station etc. for over 24 hours to charge the

clock lithum battery (☞ pg. 11).

3.• Set the tape’s record safety tab to “REC” (☞ pg. 12).

•Set the Power Dial to “ A ”, “ M ”, “5S” or “”

(☞ pg. 17).

•Replace with new cassette (☞ pg. 12).

•Close the cassette's cover.

4.• Turn the camcorder’s power

off and on again (☞ pg. 18).

5.• Set the Power Dial to any

position except “ A ” (☞ pg. 17).

6.• Set the Power Dial to any

position except “ A ”, “5S” or “” (☞ pg. 17).

7.• Set Focus to “AUTO”

(☞ pg. 41).

•Clean the lens and check the focus again (☞ pg. 73).

8.• Set it in the right position

(☞ pg. 12).

•Install a fully charged battery (☞ pg. 9).

9.• Set the Power Dial to “PLAY” (☞ pg. 46).

Page 67 Page 69
Image 68
Page 67 Page 69
Contents GR-DV808 Connection to the mains supply in the United Kingdom Dear CustomerIt is recommended that you Safety Precautions Battery pack BN-V607U DC cordGrip/Hand strap VIDEO/AUDIO cableLithium battery CR2025 for remote control unit RM-V712U DVM-30 M-DV30MEITI Insert and Tracking Information Area Sub-Code AreaVideo Area Audio Area Contents Charging The Battery Pack Installing The Battery Pack Open Battery CoverInsert Charged Battery Close Battery CoverUsing The Battery Holder Supply Power to AC Charger StationIndoor Use Connect DC Cord to AC Charger StationDate/Time Settings Select Operation ModeInput Date and Time DisplayLoading/Unloading a Cassette Open Cassette CoverINSERT/REMOVE Tape To protect valuable recordingsSelect Dial Recording Mode SettingSET Recording Mode Adjust Length Grip Strap AttachmentAttach Grip Strap to Hand Strap Eyelet Attach Grip Strap to SUB Hand Strap EyeletDioptre Adjustment Adjust DioptreTripod Mounting Turn on CamcorderRemote Control Unit Installing The BatteryPull OUT Battery Holder Insert Battery in HolderOperation Mode Power Dial PositionSelf-Timer Playback Play FunctionStart Recording Stop RecordingEND Recording Select Dial IND.ON/OFF buttonTape Remaining Indicator Adjust BrightnessBrightness Control Viewfinder IndicationsRecording From The Middle Of a Tape Proper recording When blank portion is recorded on a tapeTime Code EN Recording ZoomSelect Dial Menu button IND.ON/OFF button Displaying The Date And Time During RecordingSelect Function Engage 5S Mode Dissolves during 5 second mode recordingTo Take a Snapshot In The 5-Second Mode Scene 5-second recordingSelf-Timer Engage SELF-TIMER ModeStop SELF-TIMER Recording END SELF-TIMER RecordingAccess System Menu Select Snapshot ModeSnapshot Take SnapshotMotor Drive mode Menus Close Recording MenuRecording Menu allows you to set these functions Select Dial Menu button DisplayREC Mode Recording mode Wide ModeZoom Zoom magnification DIS Digital Image StabilizerSystem Menu Close System MenuPhoto Mode Accessmenu Manual Mode Item Access FADER/WIPE MenuTo Cancel FADE/WIPE Effects FADE/WIPE EffectsFades and Wipes Example WH Fader WhiteExample Wipe Scroll WH , BK , , B WP and P of the Fader/Wipe Menu Picture Wipe/DissolveResume Recording Random Variations Fader and Wipe Menu Fader and Wipe Menu RandomDisable P.AE/EFFECT AE/EffectsSlow Slow Shutter Manual Focus Adjustment Access Manual FocusAdjust Focus To Change To Auto FocusAdjust Exposure Exposure ControlBrightness control of the display To Return To Automatic Exposure ControlIris Iris LockTo Return To Automatic Iris Control White Balance Adjustment Accessment White Balance AdjustClosement White Balance Adjust To Return To Automatic White BalanceEnter Setting Exit Manual White Balance AdjustmentManual White Balance Operation To Change The Tint For RecordingDisplay Rewind TapeViewing Recording END PlaybackStill Playback To Perform High-Speed SearchPlayback Zoom Activate ZoomLocatescene Portion of Magnified END ZoomAccessmenu Playback Effect Select Playback EffectsAccess Playback Menu Playback MenuClose Menu Playback Menu allows you to set the following functionsDisplaying The Time Code During Playback Playback SoundDisplaying the Date During Playback Select TV’S Video Mode VCR/TV Connection when connecting directly to the camcorderTurn on Power Attach and Lock VCR/TV Connection using AC Charger StationConfirm POWER-OFF Status Basic Connections Connect AC Charger Station to TV or VCR Digital Printer Connection To a Video Unit Equipped With a DV ConnectorTo DV in connector Supply Power Attach Camcorder to AC Charger StationDubbing Make Connections Start PlaybackPause Recording Recording deckDigital Dubbing Make ConnectionsBrand Setting Operate VCRRandom Assemble Editing Execute FADE/WIPE in if NecessaryPress FADE/WIPE USE Fade Wipe on Scene Transition if NecessaryUSE P.AE/EFFECT if Necessary Stop Editing Engagemode Vcrs RECORD-PAUSEStart Editing Choose a Scene For More Accurate EditingPrepare for R.A. Edit Play Back Dubbed Scene Input Correction Data Recording deck Select DialAudio Dubbing Find EDIT-IN Point Pause During DubbingStop Dubbing Engage Audio DUB StandbyRecording Sound Display Output Sound Troubleshooting Possible Causes Troubleshooting Phones connecto Viewfinder Camcorder’s functions Cleaning The Camcorder Remove Power SupplyClean Lens Clean ViewfinderCamcorder Power dial pg Zoom switch T/W pgOPEN/EJECT switch pg Bottom of camcorder Battery cover open switch Battery pgAC Charger Station Indications During Recording FunctionIndications During Playback Indications Function Store cassettes To avoid hazardDuring use For safety, do not Avoid using the unitDirty heads can cause the following problems Do not leave the unitAudio GeneralVideo Connectors Output powerVideo AudioColour temperature AC Charger StationAuto focus On-screen displayIndex Memo Memo GR-DV808

GR-DV808 specifications

The JVC GR-DV808 is a versatile MiniDV camcorder that gained popularity for its innovative features and user-friendly design when it was released. This compact device encapsulates the essence of portable filming without compromising on video quality. With its sleek design, the GR-DV808 appeals significantly to amateur filmmakers and casual users alike, providing a variety of functionalities for capturing memories in rich, vivid detail.

One of the standout features of the GR-DV808 is its advanced image capture capabilities. It is equipped with a 1/4-inch CCD sensor that delivers impressive video resolution, ensuring that footage recorded is sharp and vibrant. The camera supports the MiniDV format, which allows for high quality digital video recording with excellent color reproduction and clarity.

The GR-DV808 includes a 20x optical zoom lens, offering exceptional versatility in various shooting situations. This optical zoom allows users to get closer shots without sacrificing quality, making it ideal for wildlife photography and events where you may be filming from a distance. Additionally, the camcorders come with a 500x digital zoom feature, though it is primarily recommended to utilize the optical zoom for clearer images.

In terms of convenience, JVC incorporated a 2.5-inch color LCD monitor that provides a clear view of the subject while recording or reviewing footage. The flexible monitor design allows for various angles, making shooting at odd positions easier. Moreover, the camcorder features a built-in speaker and microphone, enhancing the functionality for playback and sound capture.

The GR-DV808 also supports digital video editing, facilitated by its FireWire (IEEE 1394) connectivity. This capability allows users to transfer footage to a computer for editing and sharing with ease. Along with its compact size, the camcorder accommodates long recording sessions with its efficient power consumption, making it a practical choice for on-the-go videography.

Lastly, the camcorder offers various shooting modes and effects, enhancing ease of use and creative expression. Features like digital image stabilization help reduce the effect of shaky hands for smoother playback, while programmable scene modes allow users to adapt to different lighting conditions. Whether capturing weddings, family events, or travel adventures, the JVC GR-DV808 remains a significant choice for those valuing quality and convenience in a portable digital camcorder.
Top Page Image Contents