JVC LYT0002-0X8A, GR-DVX2 Time Code, When blank portion is recorded on a tape, Proper recording

Page 21

EN 21

Time Code

During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback.

If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.

To perform Random Assemble Editing (☞ pg. 60), time code is necessary. If during recording a blank portion is recorded partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent leaving a blank portion on a tape, perform the procedure in “Recording From The Middle of A Tape” (☞ pg. 20) in the following cases;

•After playing back the recorded tape, when you shoot again.

•When power shuts off during shooting. •When a tape is removed and re-inserted

during shooting.

•When shooting using a partially recorded tape. •When shooting on a blank portion located

partway through the tape.

•When shooting again after already shooting a scene and opening/closing the cassette cover.

Display

TC 12 : 34 : 24

Time code is displayed during playback.

Minutes

Seconds

Frames

(25 frames = 1 second)

NOTES:

●The Time Code cannot be reset.

●During fast-forwarding and rewinding, time code indication does not move smoothly.

When blank portion is recorded on a tape

Time code

Time code

Time code

00:00:00

05:43:21

00:00:00

Tape

Already recorded scene

Blank

Newly recorded scene

Shooting start point Shooting stop point Shooting start point

Proper recording

Time code

Time code

Time code

00:00:00

05:43:21

05:44:00

Tape

Already recorded scene

New scene

Latest scene

Shooting start point

Shooting start point

Shooting start point

Page 20 Page 22
Image 21
Page 20 Page 22
Contents GR-DVX2 Dear Customer It is recommended that youConnection to the mains supply in the United Kingdom Some DO’S and DON’TS on the Safe USE of Equipment Safety Precautions Sub-Code Area Video Area Audio AreaITI Insert and Tracking Information Area Hand strap Battery pack BN-V907UVIDEO/AUDIO cable RCA plug 4 RCA plug Mini-plug 4RCA plug Video cableCD-ROM Detach BATTERY/BATTERIES Charging The Battery PackAttach DetachOpen Battery Cover Installing The Battery PackInsert Battery Close Battery CoverFirst. Close the battery cover Supply PowerAttach to Camcorder Knob and insertSelect Operation Mode Date/Time SettingsInput Date and Time LCD monitorLoading/Unloading a Cassette OPEN/EJECT switchOpen Cassette Cover INSERT/REMOVE TapeRecording Mode Setting SET Recording ModeSet depending on your preference PUT Camcorder Attach Hand StrapClose Flap During transportingGrip Strap Attachment Adjust LengthTripod Mounting Attach Grip Strap to Hand Strap EyeletDioptre Adjustment Adjust DioptreTurn on Camcorder Installing The Battery Remote Control UnitPull OUT Battery Holder Insert Battery in HolderPower Dial Position Function Operation ModePull OUT Viewfinder or Open LCD Monitor Basic RecordingStart Recording Stop RecordingEngage Still Mode Recording From The Middle Of a TapeStart Search Time Code When blank portion is recorded on a tapeProper recording During shootingAdjust Brightness Tape Remaining IndicatorBrightness Control Brightness indication appears in the LCD monitorInterface Shooting Journalistic shootingOpen LCD Monitor Tilt LCD MonitorZoom RE COR DIN GChanging the Snapshot Setting Motor Drive modeSnapshot Take SnapshotSelect Function Snapshot Flash Auto FlashSelect Mode Adjusting Flash BrightnessAccessmenu Manual Mode Item Access Flash AdjustmentDissolves during 5 second mode recording Engage 5S ModeTo Take a Snapshot In The 5-Second Mode Scene 5-second recordingStop SELF-TIMER Recording Self-TimerEND SELF-TIMER Recording To Take a Snapshot In The Self-Timer ModeClose Recording Menu MenusRecording Menu allows you to set these functions Please refer to page 31, 32 for detailsWide Mode REC Mode Recording modeZoom Zoom magnification DIS Digital Image StabilizerFlash pg Displaying The Date And Time During Recording Access System Menu System MenuClose System Menu Return Sound signals can be sampled at 32 kHz or 48 kHzTo Cancel FADE/WIPE Effects Access FADER/WIPE MenuFADE/WIPE Effects Select EffectExample WH Fades and WipesExample Fader WhitePicture Wipe/Dissolve Resume RecordingP and P of the Fader/Wipe Menu Random Variations Fade in or out with a black screen Fade in or out with a white screenFade out from colour to black and white Fade in or out with a full-screen mosaic effectDisappears New scene gradually appears as the old one graduallyNew scene wipes in over the previous one from the upper Right corner to the lower left cornerAE/Effects Disable P.AE/EFFECTStrobe Classic FilmTwilight SepiaAccess Manual Focus Manual Focus AdjustmentAdjust Focus To Change To Auto FocusExposure Control Adjust ExposureBrightness control of the LCD monitor To Return To Automatic Exposure ControlIris Lock After , adjust the exposure rotatingTo Return To Automatic Iris Control IrisAccessment White Balance Adjust White Balance AdjustmentClosement White Balance Adjust Select Auto in . Or set the Power Dial toExit Manual White Balance Adjustment Enter SettingManual White Balance Operation To Change The Tint For RecordingRewind Tape Volume switchViewing Recording END PlaybackActivate Zoom Playback ZoomLocatescene Portion of Magnified END ZoomSelect P.AE/EFFECT Playback EffectsRM-V711U Start Playback Press the Play buttonPlayback Menu Access Playback MenuClose Menu Playback Menu allows you to set the following functionsPlayback Sound Displaying the Date During PlaybackDisplaying The Time Code During Playback Turn on Power VCR/TV Connection when connecting directly to the camcorderSelect TV’S Video Mode Turn the Power Dial to Play and turn on the TV/VCRAttach and Locks VCR/TV Connection using Docking StationWith regular video signal VCR/TV connection using the Docking StationSignal Equipped with a ScartEquipped with an S-VIDEO Connection to a TV or VCRAnd/or A/V input RCA Connect Docking Station to TV or VCRMake Connections Start Playback DubbingPause Recording VCR Recording deckBrand Setting Operate the VCR VCR Code ListRM-V711U 9 ` provided Make Connections Random Assemble EditingStart Source Playback Execute FADE/WIPE in if NecessarySET EDIT-OUT Point SET EDIT-IN PointUSE Fade Wipe on Scene Transition if Necessary USE P.AE/EFFECT if NecessaryEngagemode Vcrs RECORD-PAUSE Start EditingStop Editing Diagnosing VCR’s against Camcorder Timing For More Accurate EditingPrepare for R.A. Edit Play Back Dubbed Scene Choose a SceneInput Correction Data Adjustment of VCR‘s against Camcorder TimingFind EDIT-IN Point Audio DubbingBegin Dubbing Pause During DubbingFind Edit OUT Point Insert EditingFind Edit in Point Pause During Editing5S or Battery pgTape END appears Replace with new cassetteEN TR Ouble Shooting Picture Wipe function doesn’t work Squeeze or Cinema mode is selected in the Recording MenuEnd of its service life, images Same time Cleaning The Camcorder Camcorder Power dial pg OPEN/EJECT switch pgRBATTERY cover pg IND.ON/OFF button pg@ Charger Indicator Charge pg #Remote control sensor pg Release button pg Lock lever pg Multi connector pgJlip jack Joint Level Interface Protocol $EDIT jack pgFunction LCD Monitor/Viewfinder Indications During RecordingAppears during recording Appears while the tape is running Brightness of the flashLCD Monitor/Viewfinder Indications During Playback Indications Function Avoid using the unit For safety, do notTo avoid hazard To prevent damage to the camcorderDo not leave the unit To prolong service lifeTo protect the unit, do not To prevent damage to the LCD monitor, do notPower consumption PowerSignal format Video signal recording formatAC Adapter Colour temperatureAuto focus On-screen displayMotor Drive Mode Second Mode Fade-In/OutAnimation Audio Dubbing Pg , 54GR-DVX2

LYT0002-0X8A, GR-DVX2 specifications

The JVC GR-DVX2, also known by its model number LYT0002-0X8A, is a compact yet powerful digital camcorder that combines advanced technology with user-friendly features. Targeted at both amateur and professional videographers, this camcorder stands out for its remarkable performance and versatility.

One of the primary features of the JVC GR-DVX2 is its high-definition video recording capability, capable of recording in resolutions that cater to modern viewing standards. The camcorder employs a 1/6-inch CCD lens, which ensures excellent image quality, rich colors, and sharp details. The inclusion of a vari-angle LCD screen allows for flexible shooting angles, empowering users to capture dynamic shots with ease.

In terms of storage, the GR-DVX2 utilizes SD/SDHC memory cards, providing ample space for long recording sessions. This digital format ensures easy transfer of footage to computers for editing and sharing, making it a convenient choice for videographers. The camcorder's flexibility is enhanced with features such as digital image stabilization, which effectively reduces shake and delivers smooth, stable footage even in challenging shooting conditions.

The JVC GR-DVX2 is also equipped with an impressive 20x optical zoom lens, offering significant reach for capturing distant objects or subjects without compromising on quality. Combined with the 800x digital zoom capability, this camcorder allows for versatile shooting, whether in close or far-away settings.

Advanced audio technologies are another highlight of the GR-DVX2, which incorporates a built-in microphone that captures high-quality sound, ensuring that the audio quality matches the impressive visuals. The camcorder also supports the use of external microphones, enabling users to achieve even higher sound fidelity when desired.

The camcorder's intuitive interface and ergonomic design facilitate easy operation, making it accessible for users of all experience levels. The various shooting modes, including portrait, landscape, and night modes, optimize settings for different environments, ensuring stunning results every time.

With its combination of high-definition recording, robust zoom capabilities, and user-friendly design, the JVC GR-DVX2 (LYT0002-0X8A) is an excellent choice for anyone looking to elevate their video recording experience, whether for personal memories or professional projects.
Top Page Image Contents