JVC LYT0002-0X8A Rewind Tape, Viewing Recording, END Playback, To Perform High-Speed Search

Page 49

PLAYBACK Basic Playback

You can watch what you’ve recorded in the LCD monitor.

EN 49

Tape running indiator

4

LCD monitor

Power lamp

 

M

Power Dial

A

5S

OFFY

 

 

A

 

 

L

 

 

P

 

 

 

 

Lock button

Volume switch

MENU

Speaker

1 SELECT OPERATION MODE

Turn the Power Dial to “PLAY” while pressing down the lock button located on the dial. The Power lamp comes on.

2 OPEN LCD MONITOR Open the LCD monitor.

•When the viewfinder is pulled out, the LCD monitor cannot be used.

3 REWIND TAPE

Press 2. 2 is displayed. If you rewind all the way to the end of the tape, it stops automatically.

4 VIEWING RECORDING

Press 6/4. 4appears and the recorded footage can be viewed. The sound is heard from the speaker.

5 END PLAYBACK

Press 5. Set the Power Dial to “OFF”.

•When turning to “OFF”, it is not necessary to press down the lock button.

To Perform High-Speed Search . . .

.... press 2 or 3 after pressing 6/4. The tape

will move at approximately 9 times the normal playback speed. Watch in the LCD monitor and, when you reach the spot you want to see, press 6/4 and normal playback resumes.

.... during playback, press and hold 2or 3. The

search continues as long as you hold the button. Once you release it, normal playback resumes.

.... a slight mosaic effect appears on screen during

High-Speed Search. This is not a malfunction.

Playback Sound

You can hear sound from the speaker or using headphones connected to the headphones connector during playback. To adjust the sound volume, press the VOL. switch. The sound volume indication is displayed. Slide the VOL. switch towards “+” to turn up the volume, or towards “–” to turn it down.

Still Playback

To temporarily stop playback, press 6/4. Press again to resume playback. If still playback contin- ues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the stop mode, the camcorder’s power is automatically turned off.

Slow-Motion Playback

●To perform Slow-motion playback, the remote control is necessary.

●To change from normal to slow-motion playback, press the Pause button at the point where you want to start playback in slow motion, point the remote control at the remote sensor, and press the remote’s Slow Rewind or Slow Forward button. After playing back in slow motion for about 10 to 20 seconds, normal playback resumes. Speed is 1/10 times normal. To stop slow-motion playback in progress, press the Play button.

●During slow-motion playback, due to digital image processing, the picture may take on a mosaic effect.

●After the Slow Rewind or Slow Forward button is pressed, the still image may be displayed for a few seconds, then the screen may become blue back for a few seconds. This is not a malfunction.

●There may be a small margin between the slow- motion playback start point you chose and the start point at which the camcorder actually begins playback in slow motion.

NOTES:

●The sound is not available during High-Speed Search.

●Copy guarded tapes cannot be played back. The screen becomes blue back.

Page 48 Page 50
Image 49
Page 48 Page 50
Contents GR-DVX2 It is recommended that you Dear CustomerConnection to the mains supply in the United Kingdom Some DO’S and DON’TS on the Safe USE of Equipment Safety Precautions Video Area Audio Area Sub-Code AreaITI Insert and Tracking Information Area Hand strap Battery pack BN-V907UVIDEO/AUDIO cable RCA plug 4 RCA plug Mini-plug 4RCA plug Video cableCD-ROM Detach BATTERY/BATTERIES Charging The Battery PackAttach DetachOpen Battery Cover Installing The Battery PackInsert Battery Close Battery CoverFirst. Close the battery cover Supply PowerAttach to Camcorder Knob and insertSelect Operation Mode Date/Time SettingsInput Date and Time LCD monitorLoading/Unloading a Cassette OPEN/EJECT switchOpen Cassette Cover INSERT/REMOVE TapeSET Recording Mode Recording Mode SettingSet depending on your preference PUT Camcorder Attach Hand StrapClose Flap During transportingGrip Strap Attachment Adjust LengthTripod Mounting Attach Grip Strap to Hand Strap EyeletAdjust Dioptre Dioptre AdjustmentTurn on Camcorder Installing The Battery Remote Control UnitPull OUT Battery Holder Insert Battery in HolderPower Dial Position Function Operation ModePull OUT Viewfinder or Open LCD Monitor Basic RecordingStart Recording Stop RecordingRecording From The Middle Of a Tape Engage Still ModeStart Search Time Code When blank portion is recorded on a tapeProper recording During shootingAdjust Brightness Tape Remaining IndicatorBrightness Control Brightness indication appears in the LCD monitorInterface Shooting Journalistic shootingOpen LCD Monitor Tilt LCD MonitorZoom RE COR DIN GChanging the Snapshot Setting Motor Drive modeSnapshot Take SnapshotSelect Function Snapshot Flash Auto FlashSelect Mode Adjusting Flash BrightnessAccessmenu Manual Mode Item Access Flash AdjustmentDissolves during 5 second mode recording Engage 5S ModeTo Take a Snapshot In The 5-Second Mode Scene 5-second recordingStop SELF-TIMER Recording Self-TimerEND SELF-TIMER Recording To Take a Snapshot In The Self-Timer ModeClose Recording Menu MenusRecording Menu allows you to set these functions Please refer to page 31, 32 for detailsWide Mode REC Mode Recording modeDIS Digital Image Stabilizer Zoom Zoom magnificationFlash pg Displaying The Date And Time During Recording System Menu Access System MenuClose System Menu Return Sound signals can be sampled at 32 kHz or 48 kHzTo Cancel FADE/WIPE Effects Access FADER/WIPE MenuFADE/WIPE Effects Select EffectExample WH Fades and WipesExample Fader WhiteResume Recording Picture Wipe/DissolveP and P of the Fader/Wipe Menu Random Variations Fade in or out with a black screen Fade in or out with a white screenFade out from colour to black and white Fade in or out with a full-screen mosaic effectDisappears New scene gradually appears as the old one graduallyNew scene wipes in over the previous one from the upper Right corner to the lower left cornerAE/Effects Disable P.AE/EFFECTStrobe Classic FilmTwilight SepiaAccess Manual Focus Manual Focus AdjustmentAdjust Focus To Change To Auto FocusExposure Control Adjust ExposureBrightness control of the LCD monitor To Return To Automatic Exposure Control Iris Lock After , adjust the exposure rotating To Return To Automatic Iris Control IrisAccessment White Balance Adjust White Balance AdjustmentClosement White Balance Adjust Select Auto in . Or set the Power Dial toExit Manual White Balance Adjustment Enter SettingManual White Balance Operation To Change The Tint For RecordingRewind Tape Volume switchViewing Recording END PlaybackActivate Zoom Playback ZoomLocatescene Portion of Magnified END ZoomSelect P.AE/EFFECT Playback EffectsRM-V711U Start Playback Press the Play buttonPlayback Menu Access Playback MenuClose Menu Playback Menu allows you to set the following functionsDisplaying the Date During Playback Playback SoundDisplaying The Time Code During Playback Turn on Power VCR/TV Connection when connecting directly to the camcorderSelect TV’S Video Mode Turn the Power Dial to Play and turn on the TV/VCRAttach and Locks VCR/TV Connection using Docking StationWith regular video signal VCR/TV connection using the Docking StationSignal Equipped with a ScartEquipped with an S-VIDEO Connection to a TV or VCRAnd/or A/V input RCA Connect Docking Station to TV or VCRMake Connections Start Playback DubbingPause Recording VCR Recording deckOperate the VCR VCR Code List Brand SettingRM-V711U 9 ` provided Make Connections Random Assemble EditingStart Source Playback Execute FADE/WIPE in if NecessarySET EDIT-OUT Point SET EDIT-IN PointUSE Fade Wipe on Scene Transition if Necessary USE P.AE/EFFECT if NecessaryStart Editing Engagemode Vcrs RECORD-PAUSEStop Editing Diagnosing VCR’s against Camcorder Timing For More Accurate EditingPrepare for R.A. Edit Play Back Dubbed Scene Choose a SceneInput Correction Data Adjustment of VCR‘s against Camcorder TimingFind EDIT-IN Point Audio DubbingBegin Dubbing Pause During DubbingFind Edit OUT Point Insert EditingFind Edit in Point Pause During Editing5S or Battery pgTape END appears Replace with new cassetteEN TR Ouble Shooting Picture Wipe function doesn’t work Squeeze or Cinema mode is selected in the Recording MenuEnd of its service life, images Same time Cleaning The Camcorder Camcorder Power dial pg OPEN/EJECT switch pgRBATTERY cover pg IND.ON/OFF button pg@ Charger Indicator Charge pg #Remote control sensor pg Release button pg Lock lever pg Multi connector pgJlip jack Joint Level Interface Protocol $EDIT jack pgFunction LCD Monitor/Viewfinder Indications During RecordingAppears during recording Appears while the tape is running Brightness of the flashLCD Monitor/Viewfinder Indications During Playback Indications Function Avoid using the unit For safety, do notTo avoid hazard To prevent damage to the camcorderDo not leave the unit To prolong service lifeTo protect the unit, do not To prevent damage to the LCD monitor, do notPower consumption PowerSignal format Video signal recording formatAC Adapter Colour temperatureAuto focus On-screen displayMotor Drive Mode Second Mode Fade-In/OutAnimation Audio Dubbing Pg , 54GR-DVX2
Top Page Image Contents