JVC GR-DVX manual Loading/Unloading a Cassette, Open Cassette Cover, INSERT/REMOVE Tape

Page 14

14EN GETTINGSTARTED (Cont.)

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

OPEN/EJECT switch

Make sure the window side is facing out.

Cassette holder

PUSH HERE

Cassette cover

Erase protection switch**

1 OPEN CASSETTE COVER

Turn on the power, then slide the OPEN/EJECT switch in the direction of the arrow. The cassette cover releases. Open the cover in the direction of the arrow until it locks. The holder opens automatically.

• Do not touch internal components.

2 INSERT/REMOVE TAPE

Insert or remove a tape and press “PUSH HERE” to close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette cover.

•When the battery’s charge is low, you may not be able to close the cover. Do not apply force. Replace the battery with a fully charged one before continuing.

RECORDING TIME

TAPE

RECORDING MODE

 

SP

LP

DVM-30

Approx. 30 min.

Approx. 45 min.

DVM-60

Approx. 60 min.

Approx. 90 min.

 

 

 

NOTES:

●It takes a few seconds for the cassette holder to open. Do not apply force.

●If you wait a few seconds and the cassette holder does not open, close the cassette cover and try again.

●Be careful not to get your fingers caught in the holder when it’s closing. If this happens, the holder will open automatically after a few seconds.

●When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cover.

●Closing the cassette cover before the cassette holder comes out may cause damage to the camcorder.

●When shooting again after already shooting a scene, a blank portion is recorded on the tape or a previously recorded scene is erased (recorded over) if you open the cassette cover, regardless of whether the cassette holder comes out or not. See page 22 for information about recording from the middle of a tape.

** To protect valuable recordings . . .

..... slide the erase protection switch on the back of

the tape in the direction of “SAVE”. This prevents this tape from being recorded over. If you decide later that you do want to record on this tape, slide the switch back to “REC” before loading the tape.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents GR-DVX For Customer UseDear Customer It is recommended that youPower Lines Power SourcesPower Cord Protection Grounding or PolarizationReplacement Parts AccessoriesDamage Requiring Service Safety CheckSafety Precautions EN P Rovided a CCE Ssories DC cordFor remote control unit Grip strap Remote control unit RM-V711ULithium battery CR2025 MiniDV Cassette Tape 30 min DVM-30 Power Pack CU-V900UITI Insert and Tracking Information Area Sub-Code AreaVideo Area Audio Area Contents Attach Charging The Battery PackDetach BATTERY/BATTERIES DetachInsert Battery Installing The Battery PackOpen Battery Cover Close Battery CoverAttach to Camcorder Supply PowerFirst. Close the battery cover Knob and insertInput Date and Time Date/Time SettingsSelect Operation Mode LCD monitorOpen Cassette Cover OPEN/EJECT switchLoading/Unloading a Cassette INSERT/REMOVE TapeSet depending on your preference Recording Mode SettingSET Recording Mode Close Flap Attach Hand StrapPUT Camcorder During transportingTripod Mounting Adjust LengthGrip Strap Attachment Attach Grip Strap to Hand Strap EyeletTurn on Camcorder Diopter AdjustmentAdjust Diopter Pull OUT Battery Holder Remote Control UnitInstalling The Battery Insert Battery in HolderOperation Mode Power Dial Position FunctionStart Recording Basic RecordingPull OUT Viewfinder or Open LCD Monitor Stop RecordingStart Search Engage Still ModeRecording From The Middle Of a Tape Proper recording When blank portion is recorded on a tapeTime Code During shootingBrightness Control Tape Remaining IndicatorAdjust Brightness Brightness indication appears in the LCD monitorOpen LCD Monitor Journalistic shootingInterface Shooting Tilt LCD MonitorRE COR DIN G ZoomSnapshot Motor Drive modeChanging the Snapshot Setting Take SnapshotSnapshot Flash Auto Flash Select FunctionAccessmenu Manual Mode Item Adjusting Flash BrightnessSelect Mode Access Flash AdjustmentTo Take a Snapshot In The 5-Second Mode Engage 5S ModeDissolves during 5 second mode recording Scene 5-second recordingEND SELF-TIMER Recording Self-TimerStop SELF-TIMER Recording To Take a Snapshot In The Self-Timer ModeRecording Menu allows you to set these functions MenusClose Recording Menu Please refer to page 33, 34 for detailsREC Mode Recording mode Wide ModeFlash pg Zoom Zoom magnificationDIS Digital Image Stabilizer Displaying The Date And Time During Recording Close System Menu Access System MenuSystem Menu Sound signals can be sampled at 32 kHz or 48 kHz ReturnFADE/WIPE Effects Access FADER/WIPE MenuTo Cancel FADE/WIPE Effects Select EffectExample Fades and WipesExample WH Fader WhiteP and P of the Fader/Wipe Menu Picture Wipe/DissolveResume Recording Random Variations Out from color to black and white Fade in or out with a white screenFade in or out with a black screen Fade in or out with a full-screen mosaic effectNew scene wipes in over the previous one from the upper New scene gradually appears as the old one graduallyDisappears Right corner to the lower left cornerDisable P.AE/EFFECT AE/EffectsTwilight Classic FilmStrobe SepiaAdjust Focus Manual Focus AdjustmentAccess Manual Focus To Change To Auto FocusBrightness control of the LCD monitor Adjust ExposureExposure Control To Return To Automatic Exposure ControlTo Return To Automatic Iris Control After , adjust the exposure rotatingIris Lock IrisClosement White Balance Adjust White Balance AdjustmentAccessment White Balance Adjust Select Auto in . Or set the Power Dial toManual White Balance Operation Enter SettingExit Manual White Balance Adjustment To Change The Tint For RecordingViewing Recording Volume switchRewind Tape END PlaybackLocatescene Portion of Magnified Playback ZoomActivate Zoom END ZoomRM-V711U Playback EffectsSelect P.AE/EFFECT Start Playback Press the Play buttonClose Menu Access Playback MenuPlayback Menu Playback Menu allows you to set the following functionsDisplaying The Time Code During Playback Playback SoundDisplaying the Date During Playback Select TV’S Video Mode VCR/TV Connection when connecting directly to the camcorderTurn on Power Turn the Power Dial to Play and turn on the TV/VCRAttach and Locks VCR/TV Connection using Docking StationConfirm POWER-OFF Status Supply Power VCR/TV connection using the Docking Station EN Playback Basic ConnectionsConnect Docking Station to TV or VCR Connect as shown in the illustration pgStart Playback DubbingMake Connections Pause RecordingRM-V711U 9 ` provided Brand SettingOperate the VCR Execute FADE/WIPE in if Necessary Random Assemble EditingStart Source Playback Recording deckUSE Fade Wipe on Scene Transition if Necessary SET EDIT-IN PointSET EDIT-OUT Point USE P.AE/EFFECT if NecessaryStop Editing Engagemode Vcrs RECORD-PAUSEStart Editing ButtonChoose a Scene For More Accurate EditingPrepare for R.A. Edit Play Back Dubbed Scene RM-V711U T W providedInput Correction Data Press MENU. The Playback Menu appears on the TV screenBegin Dubbing Audio DubbingFind EDIT-IN Point Pause During DubbingFind Edit in Point Insert EditingFind Edit OUT Point Pause During EditingTape END appears Battery pg5S or Replace with new cassetteEN TR Ouble Shooting Squeeze or Cinema mode is selected in the Recording Menu Picture Wipe function doesn’t workAre actually recorded. This is Same time Cleaning The Camcorder Camcorder RBATTERY cover pg OPEN/EJECT switch pgPower dial pg IND.ON/OFF button pgDocking Station Appears during recording Appears while the tape is running LCD Monitor/Viewfinder Indications During RecordingFunction Brightness of the flashLCD Monitor/Viewfinder Indications During Playback Indications Function Using Household AC Plug Adapter Plug adapterMain Unit Signal format PowerPower consumption Video signal recording formatAuto focus Color temperatureAC Adapter On-screen displayAnimation Audio Dubbing Second Mode Fade-In/OutMotor Drive Mode Pg , 56Page Page GR-DVX

GR-DVX specifications

The JVC GR-DVX is a compact and versatile MiniDV camcorder that gained popularity in the early 2000s for its combination of high-quality video capture, user-friendly interface, and innovative features. This camcorder is a testament to JVC's commitment to advancing imaging technology while providing value to both amateur videographers and seasoned professionals.

One of the standout features of the JVC GR-DVX is its 680,000-pixel CCD sensor, which offers superior image quality. This sensor allows users to capture clear and vibrant images, whether shooting in bright daylight or low-light conditions. The MiniDV format enables the camcorder to record high-resolution video, producing sharp images with natural colors and excellent detail.

The GR-DVX also boasts a powerful 16x optical zoom lens, providing videographers with the ability to capture subjects at a distance without sacrificing image quality. This is complemented by a 100x digital zoom option, allowing further flexibility in storytelling. The lens features a wide f-stop ranging from f/1.6 to f/3.1, enabling better performance in varying lighting conditions.

With an eye towards ease of use, the camcorder includes a 3.5-inch vari-angle LCD screen that facilitates various shooting angles and compositions. This versatile screen allows users to easily frame their shots, while the intuitive menu system simplifies navigation through settings. Additionally, the built-in image stabilization technology helps reduce blurriness caused by hand movements, ensuring that recordings are smooth and stable.

The JVC GR-DVX comes equipped with various connectivity options, including FireWire (IEEE 1394) for fast digital transfer of video to a computer or editing suite. This feature enhances the editing workflow, allowing users to seamlessly transition from recording to post-production.

Furthermore, the camcorder supports a variety of shooting modes, including night mode and various manual settings, which give users the control to tailor their filming experience. It also offers built-in digital effects and transitions to enhance creativity in video projects.

In summary, the JVC GR-DVX is a well-rounded camcorder that combines effective imaging technology, versatile shooting capabilities, and user-friendly features. Its robust design, high-quality imaging, and comprehensive connectivity options make it a valuable tool for anyone looking to capture impactful video content.
Top Page Image Contents