JVC GR-DVX10 Demonstration will resume, After viewing demo, set to OFF, High magnification

Page 28

28 EN RECORDING Advanced Features For Video And D.S.C. (cont.)

Menu Screen Explanations (cont.)

CAMERA MENU

MANUAL MENU

DEMO.

ON

Demonstrates certain functions such as Programme AE with special effects,

MODE

 

etc., and can be used to confirm how these functions operate. When “DEMO.

 

 

MODE” is set to “ON” and the Menu Screen is closed, demonstration starts.

 

 

Performing any operation during the demonstration stops the demonstration

 

 

temporarily. If no operation is performed for more than 1 minute after that,

 

 

the demonstration will resume.

 

 

NOTES:

 

 

If a tape is in the camcorder, the demonstration cannot be turned on.

 

 

“DEMO. MODE” remains “ON” even if the camcorder power is turned off.

 

 

If “DEMO. MODE” remains “ON”, some functions will not be available.

 

 

After viewing demo, set to “OFF”.

 

 

 

 

OFF

Automatic demonstration will not take place.

DIS

OFF

To compensate for unstable images caused by camera-shake, particularly at

 

 

high magnification.

NOTES:

Accurate stabilisation may not be possible if hand shake is excessive, or

under the following conditions:

When shooting subjects with vertical or horizontal stripes.

ON

•When shooting dark or dim subjects.

When shooting subjects with excessive backlighting.

When shooting scenes with movement in various directions.

When shooting scenes with low-contrast backgrounds.

Switch off this mode when recording with the camcorder on a tripod.

The “ ” indicator blinks or goes out if the Stabiliser cannot be used.

SELF-

Refer to “Self-Timer” ( pg. 32).

 

 

 

TIMER

 

 

 

 

 

 

5S

OFF

Refer to “5-Second Recording” ( pg. 33).

 

 

 

 

5S

 

 

 

 

 

 

 

ANIM.

Allows you to record a few frames only. By using an inanimate object and

 

 

 

 

changing its position between shots, you can record the subject as though it is

 

 

 

moving ( pg. 33).

 

 

 

 

 

 

 

 

 

TELE

OFF

Usually the distance to a subject where the lens is in focus depends on the

 

MACRO

 

zoom magnification. Unless there is a distance more than 1m to the subject,

 

 

 

the lens is out of focus at the maximum telephoto setting. When set to “ON”,

 

 

ON

you can shoot a subject as large as possible at a distance of approx. 60 cm.

 

 

 

• Depending on the zoom position, the lens may go out of focus.

 

 

 

 

 

 

 

 

 

 

 

 

 

WIDE

OFF

Records with no change in the screen ratio. For playback on a TV with a

 

MODE

 

normal screen ratio.

 

 

 

 

 

CINEMA

Inserts black bands at the top and bottom of the screen. During playback on

 

 

 

wide-screen TVs, the black bands at the top and bottom of the screen are cut

 

 

 

and the screen ratio becomes 16:9.

appears. When using this mode, refer

 

 

 

to your wide-screen TV’s instruction manual. During playback/recording on

 

 

 

 

4:3 TVs/LCD monitor/viewfinder, black bands are inserted at the top and

 

 

 

 

bottom of the screen and the image appears like a letterboxed 16:9 movie.

 

 

 

 

•“CINEMA” mode is effective only when the MODE Dial is set to “VIDEO” or “

”.

 

 

 

 

 

 

 

SQUEEZE

For playback on TVs with an aspect ratio of 16:9. Naturally expands the image

 

 

 

to fit the screen without distortion.

 

appears. When using this mode, refer to

 

 

 

 

 

 

 

your wide-screen TV’s instruction

manual. During playback/recording on 4:3

 

 

 

 

TVs/LCD monitor/viewfinder, the image is elongated vertically.

 

 

 

 

 

•“SQUEEZE” mode is effective only when the MODE Dial is set to “VIDEO” or “

 

”.

 

 

 

 

 

 

 

PS-WIDE

SW ” appears. The zoom range is extended beyond the maximum optical

 

 

 

 

zoom wide angle range. This mode’s wide angle setting is equivalent to using

 

 

 

a 0.7X wide conversion lens. Zooming is possible from 0.7X to 10X. This

 

 

 

 

mode is suitable for shooting in a small room.

 

 

 

 

 

•“PS-WIDE” mode is effective only when the MODE Dial is set to “

”.

 

 

 

 

 

 

 

 

 

: Factory-preset

Image 28
Contents GR-DVX10 GR-DVX9 Dear Customer It is recommended that youSome DO’S and DON’TS on the Safe USE of Equipment Remote Control Unit RM-V716U Core Filter x Cleaning ClothRCA plug cable Cable Adapter DC CordHow To Attach Core Filters Release the stoppers on both ends of the Core FilterStopper Wind oncePower Charging the Battery PackLithium-ion is vulnerable in colder temperatures Benefits Of Lithium-Ion BatteriesUsing the Battery Pack Using AC PowerTo Detach The Battery Pack While sliding down BATT. RELEASE, detach itGrip Adjustment Viewfinder AdjustmentDioptre Adjustment Control Tripod MountingDate/Time Settings Built-in Clock’s Rechargeable Lithium BatterySet the Operation Switch to and set the Power Power Switch Power Lamp Lock Button Operation Menu WheelOPEN/EJECT Switch Erase protection tab 10 ENLoading/Unloading a Cassette Cassette holder coverRecording Mode Setting EN11Display Menu Screen Sub MenuLoading a MultiMediaCard 12 ENTo Unload a MultiMediaCard EN13 Picture Quality/Size Mode SettingApproximate Number of Storable Images Operation Mode Power Switch PositionOperation Switch Position Manual 14 ENMode Dial Position Progressive ModeEN15 FunctionTo Adjust The Brightness Of The Display 16 ENPress START/STOP To Stop RecordingEN17 Journalistic ShootingSELF-RECORDING Self-RecordingSnapshot Mode Selection 18 ENSnapshot For Video Recording Snapshot RecordingWhen unwanted still images are stored When you do not want to hear the shutter sound, setBasic Shooting Snapshot To Delete Unwanted Still ImagesSlide the Power Zoom Lever towards T 20 ENZoom Zoom OutEN21 When a blank portion is recorded on a tapeProper recording Progressive Mode Recording To End Progressive Mode RecordingDescription of Progressive Scan CCD EN23Regular shooting of moving images Frame Scan a Scan BMode Dial to Dual ShootingFocus Button Fully-pressed PositionFeature Auto Focus Feature Manual FocusEN25 To obtain correct focusSee pg Using Menus For Detailed AdjustmentGo to step Menu Screen Explanations EN27Refer to Self-Timer  pg Demonstration will resumeAfter viewing demo, set to OFF Automatic demonstration will not take placeEN29 Snapshot Flash If Auto Is SelectedFlash Brightness Adjustment Power Switch Lock Button Operation SwitchEN31 Menu Wheel DisplaySelf-Timer Rotate the Menu wheel to select , and press itSecond Recording Mode Dial to VideoEN33 Fade/Wipe Effects FADE/WIPE SelectionPicture Wipe or Dissolve Selection To Deactivate The Selected EffectFader And Wipe Menu EN35Menu Effect To Deactivate The Selected Mode Programme AE With Special EffectsSound Effect Mode Selection To cancel recording the sound effect midwayDigital Sound Effects EN37Exposure Control Iris LockWhite Balance Adjustment Manual White Balance OperationEN39 To Return To Automatic White BalanceTo Control The Speaker Volume Available only with the remote control provided  pgEN41 Playback Sound 42 ENDisplay To cancel Blank Search midway Blank SearchEN43 Rotate the Menu wheel to select EXECUTE, then press it44 EN Mail Clip RecordingAuto Playback Normal PlaybackImages shot with the camcorder are automatically Protect icon Power Switch Lock Button Menu Wheel Index ScreenType of file DirectoryIndex Playback EN47If you press Index twice If you press Index three times48 EN Protecting FilesTo Protect a File To Remove ProtectionPower Switch Lock Button Deleting FilesEN49 To Select a File by Browsing Files Stored in MemoryPower Switch Menu Wheel Display 50 ENInitialising a MultiMediaCard You can initialise a MultiMediaCard anytimeSuperimposing a Print Frame EN51To Make The Print Frame Disappear Press Print FrameSet the Power Switch to 52 ENPrint Frame Deletion Lock Button Delete Index Screen Deletion ConfirmationTo Delete ALL Print Frames To Reset The Setting 54 ENTo Print ALL Still Images ONE Print for Each This camcorder is compatible with the Dpof Digital PrintEN55 To Reset The No. Of PrintsTo Print by Selecting Still Images and NO. of Prints 56 EN Docking Station with the stud holeCamcorder Tighten the screwEN57 If using a VCR . . . go to step If not . . . go to stepMake sure all units are turned off Open Connector Cover 58 ENConnection To a Personal Computer CableConnection To a Video Unit Equipped With a DV Connector EN59With a DV input Core filter Digital Printer60 EN Dubbing To a VCRTo use this camcorder as a player For GR-DVX10 owners onlyEN61 Dubbing From a VCRLock Button To S Red to Yellow to To DV OUT Core filter DV cable optional 62 ENPlay Stop EN63 To DV IN/OUT Core filter DV cable optional To DV OUTIndicator disappears when dubbing is complete Power Switch Lock Button Snapshot Button64 EN Dubbing Images Stored In a MultiMediaCard To a TapeDubbing Images Recorded On a Tape To a MultiMediaCard Menu Wheel Power Switch Lock ButtonEN65 Installing The Batteries 66 ENTab Remote sensorEN67 Functions ButtonsFeature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Zoom 68 ENEN69 Feature Playback Special EffectsEffect Select Menu 70 EN SET REMOTE/VCR CodeVCR Recording deck You are now ready to try Random Assemble EditingEN71 Make ConnectionsSelect Scenes 72 ENEditing Menu EN73 Automatic Editing to VCR74 EN For More Accurate EditingDiagnosing VCR/CAMCORDER Timing ProgrammeEN75 Adjustment of VCR/CAMCORDER TimingRecording deck Set 12BIT Mode to Sound 2 or MIX Menu Screen  pg 76 ENAudio Dubbing To hear the dubbed sound during playbackAudio Dubbing Using Digital Sound Effects EN77Cleaning The Camcorder Push Here OPEN/EJECT Switch Hatch Lens blower78 EN After UseTroubleshooting Corrective ActionTroubleshooting 80 ENEN81 82 EN EN83  pg84 EN Printer Connector Multi ConnectorEN85 Auto Shut Off86 EN EN87 Appears while the tape is running 88 ENOrder of quality EN89 Displays the sound mode LCD Monitor/Viewfinder Indications During Video PlaybackLCD Monitor/Viewfinder Indications During D.S.C. Playback Displays the selected Digital Sound EffectEN91 92 EN While the Power Switch is set toDeleted To prevent damage and prolong service life EN93Pack, be sure to read the Terminals following cautions To avoid hazards94 EN EN95 To protect the unit, do notAbout moisture condensation Serious malfunctioning96 EN EN97 Time Code  pg , 29, 4198 EN EN99 EG/EK