JVC GR-DVX10 specifications EN95, To protect the unit, do not, About moisture condensation

Page 95

4.To protect the unit, DO NOT . . .

.... allow it to become wet.

.... drop the unit or strike it against hard objects.

.... subject it to shock or excessive vibration during transportation.

.... keep the lens directed at extremely bright objects for long periods.

.... expose the lens to direct sunlight.

.... carry it by holding the LCD monitor or the viewfinder.

.... swing it excessively when using the hand strap or the grip.

.... swing the soft camera case excessively when the camcorder is inside it.

5.Dirty heads can cause the following problems:

No picture during playback.

Blocks of noise appear during playback.

During recording, the Head Clog Warning indicator “” appears.

In such cases, use an optional cleaning cassette. Insert it and play back. If the cassette is used more than once consecutively, damage to the video heads may result. After the camcorder plays back for about 20 seconds, it stops automatically. Also refer to the cleaning cassette’s instructions.

If, after using the cleaning cassette, the problems still exist, consult your nearest JVC dealer. Mechanical moving parts used to move the video heads and video tape tend to become dirty and worn out over time. In order to maintain a clear picture at all times, periodic check-ups are recommended after using the unit for about 1,000 hours. For periodic check-ups please consult your nearest JVC dealer.

EN95

How To Handle A CD-ROM

Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the centre hole using a circular motion.

Do not use conventional disc cleaners or cleaning spray.

Do not bend the CD-ROM or touch its mirror surface.

Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct sunlight.

About moisture condensation . . .

You have observed that pouring a cold liquid into a glass will cause drops of water to form on the glass‘ outer surface. This same phenomenon occurs on the head drum of a camcorder when it is moved from a cool place to a warm place, after heating a cold room, under extremely humid conditions or in a place directly subjected to the cool air from an air conditioner.

Moisture on the head drum can cause severe damage to the video tape, and can lead to internal damage to the camcorder itself.

Serious malfunctioning

If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer.

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from function- ing properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.) and wait a few minutes and then re-connect it and proceed as usual from the beginning.

Image 95
Contents GR-DVX10 GR-DVX9 It is recommended that you Dear CustomerSome DO’S and DON’TS on the Safe USE of Equipment DC Cord Remote Control Unit RM-V716U Core Filter xCleaning Cloth RCA plug cable Cable AdapterWind once How To Attach Core FiltersRelease the stoppers on both ends of the Core Filter StopperBenefits Of Lithium-Ion Batteries PowerCharging the Battery Pack Lithium-ion is vulnerable in colder temperaturesWhile sliding down BATT. RELEASE, detach it Using the Battery PackUsing AC Power To Detach The Battery PackTripod Mounting Grip AdjustmentViewfinder Adjustment Dioptre Adjustment ControlPower Switch Power Lamp Lock Button Operation Menu Wheel Date/Time SettingsBuilt-in Clock’s Rechargeable Lithium Battery Set the Operation Switch to and set the PowerCassette holder cover OPEN/EJECT Switch Erase protection tab10 EN Loading/Unloading a CassetteMenu Screen Sub Menu Recording Mode SettingEN11 DisplayTo Unload a MultiMediaCard 12 ENLoading a MultiMediaCard Approximate Number of Storable Images Picture Quality/Size Mode SettingEN13 14 EN Operation ModePower Switch Position Operation Switch Position ManualFunction Mode Dial PositionProgressive Mode EN15To Stop Recording To Adjust The Brightness Of The Display16 EN Press START/STOPSelf-Recording EN17Journalistic Shooting SELF-RECORDINGSnapshot Recording Snapshot Mode Selection18 EN Snapshot For Video RecordingTo Delete Unwanted Still Images When unwanted still images are storedWhen you do not want to hear the shutter sound, set Basic Shooting SnapshotZoom Out Slide the Power Zoom Lever towards T20 EN ZoomProper recording When a blank portion is recorded on a tapeEN21 To End Progressive Mode Recording Progressive Mode RecordingFrame Scan a Scan B Description of Progressive Scan CCDEN23 Regular shooting of moving imagesFully-pressed Position Mode Dial toDual Shooting Focus ButtonTo obtain correct focus Feature Auto FocusFeature Manual Focus EN25Go to step Using Menus For Detailed AdjustmentSee pg EN27 Menu Screen ExplanationsAutomatic demonstration will not take place Refer to Self-Timer  pgDemonstration will resume After viewing demo, set to OFFEN29 If Auto Is Selected Snapshot FlashMenu Wheel Display Flash Brightness AdjustmentPower Switch Lock Button Operation Switch EN31Rotate the Menu wheel to select , and press it Self-TimerEN33 Mode Dial to VideoSecond Recording To Deactivate The Selected Effect Fade/Wipe EffectsFADE/WIPE Selection Picture Wipe or Dissolve SelectionMenu Effect EN35Fader And Wipe Menu Programme AE With Special Effects To Deactivate The Selected ModeEN37 Sound Effect Mode SelectionTo cancel recording the sound effect midway Digital Sound EffectsIris Lock Exposure ControlTo Return To Automatic White Balance White Balance AdjustmentManual White Balance Operation EN39Available only with the remote control provided  pg To Control The Speaker VolumeEN41 Display 42 ENPlayback Sound Rotate the Menu wheel to select EXECUTE, then press it To cancel Blank Search midwayBlank Search EN43Mail Clip Recording 44 ENImages shot with the camcorder are automatically Normal PlaybackAuto Playback Directory Protect icon Power Switch Lock Button Menu WheelIndex Screen Type of fileIf you press Index three times Index PlaybackEN47 If you press Index twiceTo Remove Protection 48 ENProtecting Files To Protect a FileTo Select a File by Browsing Files Stored in Memory Power Switch Lock ButtonDeleting Files EN49You can initialise a MultiMediaCard anytime Power Switch Menu Wheel Display50 EN Initialising a MultiMediaCardPress Print Frame Superimposing a Print FrameEN51 To Make The Print Frame DisappearLock Button Delete Index Screen Deletion Confirmation Set the Power Switch to52 EN Print Frame DeletionTo Delete ALL Print Frames This camcorder is compatible with the Dpof Digital Print To Reset The Setting54 EN To Print ALL Still Images ONE Print for EachTo Print by Selecting Still Images and NO. of Prints To Reset The No. Of PrintsEN55 Tighten the screw 56 ENDocking Station with the stud hole CamcorderMake sure all units are turned off If using a VCR . . . go to step If not . . . go to stepEN57 Cable Open Connector Cover58 EN Connection To a Personal ComputerCore filter Digital Printer Connection To a Video Unit Equipped With a DV ConnectorEN59 With a DV inputFor GR-DVX10 owners only 60 ENDubbing To a VCR To use this camcorder as a playerLock Button To S Red to Yellow to Dubbing From a VCREN61 Play Stop 62 ENTo DV OUT Core filter DV cable optional To DV IN/OUT Core filter DV cable optional To DV OUT EN63Dubbing Images Stored In a MultiMediaCard To a Tape Indicator disappears when dubbing is completePower Switch Lock Button Snapshot Button 64 ENEN65 Menu Wheel Power Switch Lock ButtonDubbing Images Recorded On a Tape To a MultiMediaCard Remote sensor Installing The Batteries66 EN TabFunctions Buttons EN6768 EN Feature Slow-Motion PlaybackFeature Frame-By-Frame Playback Feature Playback ZoomEffect Select Menu Feature Playback Special EffectsEN69 You are now ready to try Random Assemble Editing 70 ENSET REMOTE/VCR Code VCR Recording deckMake Connections EN71Editing Menu 72 ENSelect Scenes Automatic Editing to VCR EN73Programme 74 ENFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingRecording deck Adjustment of VCR/CAMCORDER TimingEN75 To hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen  pg76 EN Audio DubbingEN77 Audio Dubbing Using Digital Sound EffectsAfter Use Cleaning The CamcorderPush Here OPEN/EJECT Switch Hatch Lens blower 78 ENCorrective Action Troubleshooting80 EN TroubleshootingEN81 82 EN  pg EN8384 EN Auto Shut Off Printer ConnectorMulti Connector EN8586 EN EN87 Order of quality 88 ENAppears while the tape is running EN89 Displays the selected Digital Sound Effect Displays the sound modeLCD Monitor/Viewfinder Indications During Video Playback LCD Monitor/Viewfinder Indications During D.S.C. PlaybackEN91 Deleted While the Power Switch is set to92 EN To avoid hazards To prevent damage and prolong service lifeEN93 Pack, be sure to read the Terminals following cautions94 EN Serious malfunctioning EN95To protect the unit, do not About moisture condensation96 EN Time Code  pg , 29, 41 EN9798 EN EN99 EG/EK