JVC LYT0002-0F2A manual Docking Station Attachment, Confirm POWER-OFF Status, Attach and Locks

SUPPLY POWER

The Docking Station must be powered by the AC adapter whether the battery is in the camcorder or not.

•The Docking Station cannot function using the camcorder’s battery.

SELECT MODE

Set the Power Dial to “PLAY”.

To DC input jack

Core filter To AC outlet

Power cord

EN 51

Docking Station Attachment

When you attach your camcorder to the Docking Station, you can add many interesting effects during playback.

Power Dial

	Docking
	Station
	AC Power
	Adapter/Charger
To DC jack	Release button
	Lock lever

		Using The Remote Control During Playback
	CONFIRM POWER-OFF STATUS
1 Make sure the camcorder’s power is off.		Once the camcorder is attached to the Docking
		Station, you can use the RM-V708U or RM-V710U
	ATTACH AND LOCKS
		remote control for regular playback, slow motion
2 Press down on the camcorder and slide the		(approx. 1/10 speed (☞ pg. 53), Playback Zoom
	Lock Lever in the direction of the arrow. The	(☞ pg. 56), and P.AE/Effects (☞ pg. 40).
	camcorder and the Docking Station are now	NOTE:
	securely attached.
		When using the provided DC cord, make sure you
	•When removing the camcorder, slide the lock
		connect the end of the cable with the core filter to
	lever in the opposite direction of the arrow
		the Docking Station. The core filter improves
	while pressing down the Release button and
		performance of equipment.
	lift the camcorder out.

3

4