JVC GR-FXM75 manual 34 EN

Page 34

34EN

RECORDING

AdvancedFeatures(cont.)

Menu Screen Available Using The MENU Button (cont.)

TELE MACRO

OFF

Usually the distance to a subject where the lens is in focus

 

ON

depends on the zoom magnification. Unless there is a distance of

 

more than 1m to the subject, the lens is out of focus at the

 

 

 

 

maximum telephoto setting. When set to “ON”, you can shoot a

 

 

subject as large as possible at a distance of approx. 60 cm.

 

 

•Depending on the zoom position, the lens may go out of focus.

 

 

 

DATE/TIME

Allows you to set the current date and time (☞ pg. 9).

 

 

TAPE LENGTH*

Allows you to set the tape length depending on the tape used (☞ pg. 10).

 

 

PICTURE**

Allows you to select the image setting “FINE” or “STD” when storing in the

 

camcorder's memory (☞ pg. 20).

 

 

 

SNAPSHOT

FULL

Displayed with the System Select Switch set to either “VIDEO”

 

PIN-UP

(☞ pg. 22) or “D.S.C.” (☞ pg. 19).

 

MULTI-4

Displayed only with the System Select Switch set to “D.S.C.”

 

MULTI-9

(☞ pg. 19).

 

 

 

M.DRIVE

 

REC TIME*

This feature allows you to set the parameters for Animation and Time-Lapse

 

recording (☞ pg. 41).

 

 

INT. TIME

This feature allows you to set the parameters for Self-Timer (☞ pg. 40) and Time-

 

Lapse recording (☞ pg. 41).

 

 

 

TALLY LAMP*

OFF

The tally lamp remains off at all times.

 

 

 

 

ON

The tally lamp comes on to signal the start of recording.

JLIP ID NO.

This number is necessary when connecting the camcorder to a device such as a computer

 

using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.

 

 

 

DEMO MODE*

OFF

Automatic demonstration will not take place.

 

ON

Demonstrates certain functions such as Fade/Wipe, etc. When

 

 

“DEMO MODE” is set to “ON” and the Menu Screen is closed,

 

 

the demonstration starts.

 

 

NOTES:

 

 

● When a tape whose Erase Protection tab is in the position that

 

 

allows recording is loaded in the camcorder, demonstration is

 

 

not available.

 

 

● By turning off the camcorder or inserting a tape whose Erase

 

 

Protection tab is in the position that allows recording into it,

 

 

“DEMO MODE” is set to “OFF” automatically.

 

 

● During the demonstration, all functions except zoom are

 

 

disabled.

 

 

 

*Activated only with the System Select Switch set to “VIDEO”. If the System Select Switch is set to “D.S.C.”, this function will not be activated although the highlight bar will move on the Menu Screen like the setting procedure.

**Activated only with the System Select Switch set to “D.S.C.”. If the System Select Switch is set to “VIDEO”,

this function will not be activated although the highlight bar will move on the Menu Screen like the setting procedure.

Functions listed without an asterisk are available with the System Select Switch set to either “D.S.C.” or “VIDEO”.

: Factory-preset

Page 33 Page 35
Image 34
Page 33 Page 35
Contents GR-FXM75 It is recommended that you Dear CustomerConnection to the mains supply in the United Kingdom Sepia Major FeaturesElectronic Fog Filter ND Effect Twilight Sports Nega/Posi 2000 sec. High Speed ShutterContents Editing cable DC Cord PC Connection Cable x AC Power Adapter Cassette Adapter C-P7URemote control unit Unit RM-V709U For WindowsCharging the Battery Pack PowerUsing the Battery Pack Using a CAR Battery Using AC PowerDischarged Insert Battery in Holder Switch OFF PowerRemove Battery Holder Getting StartedDate/Time Settings SET Recording Mode Recording Mode SettingTape Length Setting 10 ENOpen Cassette Holder Loading/Unloading a CassetteOpen LCD Monitor Close Cassette HolderViewfinder Adjustment Grip Adjustment12 EN Tripod Mounting Adjust LengthShoulder Strap Attachment Attach StrapVideo Recording Power Switch Position14 EN Basic RecordingStop Recording Tape remaining time indicatorLCD Monitor/Viewfinder Indications Press Display Button16 EN Lights while recording is in progressInterface Shooting Journalistic ShootingBrightness Control Basic Shooting Mode Selection18 EN Still Image StorageMotor Drive mode Snapshot mode with no frameRemaining number of shots 30 29 Snapshot Button System Select Switch Menu Button Power lamp Feature Picture Mode Setting20 EN EN21 22 EN Recording Basic FeaturesSnapshot Mode Selection SnapshotSnapshot Recording If you press during Record-Standby modeDisplay ex. PIN-UP Basic Features Push the Power Zoom Lever towards TTo check the end of the last recording Feature Quick ReviewFeature Picture Stabilizer To re-record certain segmentsBattery power Feature Video LightTo brighten the scene when natural lighting is too dim Light OFF/AUTO/ON SwitchModeengage FADE- or WIPE-STANDBY 28 EN Advanced FeaturesSelect Mode Programme AE With Special EffectsHigh shutter speed clearly captures fast-moving action Display ModeCaptures faster action than Sports mode Colours of a picture are reversed30 EN Recording Advanced FeaturesPower Switch Menu Screen DATE/TIME DISP. Menu Date/Time InsertPower Switch Menu Screen Title Menu Access Title MenuSystem Select Switch Select Dial Display Instant TitlesEND Setting Using Menu For Detailed AdjustmentMake Setting 32 ENMenu Screen Available Using The Menu Button Menu Screen Available Using The Select DialMenu Screen Explanations 34 EN Exposure Control Access Exposure MenuTo darken the image Recording Focusing36 EN Auto FocusEND Adjustment of Focus Access Focus MenuAccess Manual Focus Manual Focus38 EN White Balance AdjustmentAccess White Balance Adjustment SET Function ParametersPress the Select Dial again to close the Menu Screen Enter SettingManual White Balance Operation To Change The Tint For RecordingStart Delayed Recording Self-TimerAccess INT. Time Menu EN RecordingAnimation Time-LapseRewind or Fast-Forward the tape 42 ENVideo Playback Basic Playback Play BackAdjust Volume Features EN43Speaker Volume Control Tracking44 EN FeaturesVideo Playback Recording safety hole Using The Cassette Adapter EN45Insert Battery Cassette AdapterBasic Connections 46 ENBasic Connections And Tape Dubbing Connection For Tape DubbingTape Dubbing Becomes blue 48 ENC. Playback Basic Playback To move BackC. Playback Connection Connection to a Windows PC50 EN C. Playback Advanced FeaturesIf you select any other functions Never remove the power supply unit at this stage Menu Screen ExplanationsView Index Images EN D.S.C. PlaybackIndex Playback ScreenSET Protect Access Protect MenuProtect Way To complete Protect, go to stepTo quit the Delete Mode Access Delete MenuSelect Delete Mode 54 ENAccess Delete Execute Menu X T Delete56 EN Installing The BatteryPull OUT Battery Holder FunctionsAnimation Feature Self-Timer, Animation Time-LapseSelf-Timer Time-LapseSET REMOTE/VCR Code Using the Remote Control Unit58 EN Operate VCRVCR Other than Type or Make ConnectionsJVC VCR Equipped with Remote Pause Terminal Prepare CamcorderStart Source Playback 60 ENSelect Scenes Register END of SceneHow to use Supplemental Information on the Remote ControlAutomatic Editing to VCR EN Using the Remote Control Unit Insert Editing VideoTo insert still images in sequential order onto the tape Built-in Memory Onto a TapeSelect Still Image Press REW 2/PAGE- or FF 3/PAGE+ to move the page forwardAudio Dubbing Engage Audio DUB-STANDBY ModeBegin Audio Dubbing Light used to illuminate the LCD monitor causes it to be Power supply has not been correctly connected pgPress Display for longer than 1 second to make the indica LCD monitor and the viewfinder are made with high-precisionWhen the System Select Switch is set to Video ContWhen the System Select Switch is set to D.S.C Index Controls, Connectors And Indicators 68ENMENU/DISPLAY Button Counter Reset/Memory Button Video Light SwitchSystem Select Switch Recording Mode Button SP/LPIndex 70 ENIndications Indicator Only the indicator remains atRemains at Picture Mode Display Zoom Level Indicator Approximate Zoom Ratio72 EN Use only the following battery P6U or C-P7UTo prevent damage and prolong service life JVC dealer for replacing the video lightPlaces of over 50C Vertically, in their original casesDirect sunlight A closed car in summer Near a heater Turn the eyepiece counterclockwise and pull it out Remove dust using a blower brushAvoid rubbing it with coarse cloth Re-attach the eyepiece and turn it clockwiseProvided Accessories Optional Accessories ConnectorsGeneral GR-FXM75

GR-FXM75 specifications

The JVC GR-FXM75 is a compact and versatile camcorder that has made a mark in the realm of home video recording. This model stands out for its combination of portability, ease of use, and advanced features, making it an excellent choice for both amateur videographers and those capturing special moments.

One of the most notable features of the GR-FXM75 is its high-resolution 1/6-inch CCD sensor, which delivers sharp and vibrant video quality. This camera captures footage in the standard DV format, ensuring that recordings maintain a professional quality that can be easily edited or shared. The camcorder’s ability to record in full color and high contrast makes it ideal for various shooting conditions.

The GR-FXM75 comes equipped with a 20x optical zoom lens, which allows users to get close to the action without sacrificing image quality. This zoom capability is complemented by a powerful digital zoom feature, enabling further magnification while maintaining clarity. The lens also includes a built-in optical stabilization system, reducing the risk of shaky recordings for smoother playback.

Another significant aspect of the JVC GR-FXM75 is its user-friendly interface. The camcorder features an intuitive control layout, with a flip-out LCD viewfinder that allows for flexible shooting angles and easy framing of shots. The viewfinder provides real-time feedback, ensuring that users can monitor their recordings effortlessly.

In terms of audio, the GR-FXM75 includes a built-in microphone that captures sound clearly, alongside the option for external microphone input for more advanced audio needs. This feature enhances the overall quality of video projects, ensuring that both visuals and sound are immersive.

Connectivity is another strong point for the JVC GR-FXM75. It includes USB and FireWire ports, facilitating easy transfer of footage to a computer for editing or storage. This connectivity allows for streamlined sharing of videos, making it easy to distribute special moments to friends and family.

Overall, the JVC GR-FXM75 exemplifies a balance of technical performance and user-centric design. With its impressive shooting capabilities, portability, and connectivity options, it remains a reliable choice for anyone looking to capture high-quality video experiences. Whether used for family vacations, events, or personal projects, the GR-FXM75 continues to be a valuable tool for preserving memories.
Top Page Image Contents