MENU SETTINGS
paper fills the screen. If it is difficult to focus on the white paper, adjust focus manually (pg. 9, “Auto/Manual Focus”). Press the MENU Wheel 1 in until “MWB” } begins blinking. When the setting is completed, “MWB” } stops blinking.
•Once you adjust white balance manually, the setting is retained even if the power is turned off or the battery is removed.
•White balance cannot be used when the “SEPIA” or “B/W:MONO” mode is activated.
TITLE
Allows you to superimpose one of eight preset titles.
•] shows the selected title which remains until OFF is selected.
TITLE SETUP
Adjust the settings for TITLE.
SIZE : When “LARGE” is selected, the title is twice enlarged vertically than “NORMAL”.
SCROLL : When “ON” is selected, the title is scrolled from right to left.
To set “SIZE” or “SCROLL”, rotate the MENU Wheel 1 to select the desired item and press it. When the setting begins blinking, rotate the MENU Wheel 1 until the correct setting appears and then select it. The setting stops blinking.
SYSTEM MENU
DISPLAY
FULL: Makes all of the indications appear on the LCD monitor*/viewfinder during playback or recording.
SIMPLE: Makes the following indications disappear from the LCD monitor*/viewfinder
during recording or playback 
0, tape
remaining time ., 
, tape length ;.
*
DATE/TIME DISP.
The date/time appears in the camcorder or on a connected monitor (set DATE/TIME in SYSTEM MENU first pg. 7).
•The selected display will be recorded. If you do not want to record the display, select "OFF" before shooting.
•In the AUTO DATE mode, the camcorder records the date for about 5 seconds when recording is initiated after the date is changed, a cassette is loaded, or AUTO DATE is selected. The date is replaced after 5 seconds with “AUTO DATE” but this is not recorded.
OSD OUTPUT
ON: On-screen indications are displayed.
OFF:
LCD BRIGHT
(GR-FXM41 only)
To adjust the brightness of the LCD monitor, perform the following steps quickly (within approx.
1 second by each interval):
1)Select “LCD BRIGHT” in SYSTEM MENU. The “BRIGHT ON” message appears.
2)Press the BRIGHT Wheel 1 in to return to normal screen.
3)Rotate the BRIGHT Wheel 1 to display the bright level indicator _.
4)Rotate the BRIGHT Wheel 1 until the
appropriate brightness is reached. After the BRIGHT Wheel 1 is released, the indicator soon disappears and adjustment is completed.
DATE/TIME SET
Allows you to set the current date and time. (pg. 7)
DEMO MODE
Demonstrates certain functions automatically. Available when the Power Switch # is set to “
” or “
” and “DEMO MODE” is set to “ON” (factory- preset).
•To cancel demonstration, set "DEMO MODE" to "OFF".
•Pressing MENU Wheel 1 directly accesses DEMO MODE menu while the demo is in progress.
•Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume.
•“DEMO MODE” remains “ON” even if the camcorder power is turned off.
•When a cassette is in the camcorder, demonstration is not available.
•If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor* or viewfinder.
* GR-FXM41 only.
14