JVC GR-FX17, GR-FXM41 manual VCR Menu, REC Time, INT. Time, Tape Length, Counter Memory

REC TIME

You can shoot a series of pictures, each slightly different, of the same object for a brief selected period of time (Animation). REC MODE should be set to “SP”.

Select the desired recording time and press the Recording Start/Stop Button ! after focusing on the subject.

•Fade-or wipe-in/out cannot be performed.

•This function is cancelled when the power is turned off or when the cassette is ejected.

•To use this function, it is recommended that SCROLL in TITLE SETUP (pg. 14) be set to “OFF”.

INT. TIME

You can record sequentially at preset time spans. Leaving the camcorder aimed at a specific subject, you can record subtle changes over an extended period of time (Time-Lapse). REC MODE should be set to “SP”.

(Please note that it is necessary to set the REC TIME (Animation) in the SYSTEM MENU before performing the INT. TIME (Time-Lapse) function.) Select the desired interval time and press the Recording Start/Stop Button !.

•Fade- or wipe-in/out cannot be performed.

•This function is cancelled when the power is turned off or when the cassette is ejected.

•To use this function, it is recommended that SCROLL in TITLE SETUP (pg. 14) be set to “OFF”.

TAPE LENGTH

Allows you to set the tape length depending on the tape used: T30=30 minutes, T45=45 minutes, T50=50 minutes, T60=60 minutes.

•Tape remaining time . is correct only if the correct tape length has been selected.

VCR MENU

V C R M E N U

C O U N T E R M E M O R Y O F F

C O U N T E R R E S E T Y E S

2E X I T

COUNTER MEMORY

Makes it easier to locate a specific tape segment.

1)Set the Power Switch # to "PLAY" while pressing down the Lock Button ".

2)Press the MENU Wheel 1 in. The VCR MENU screen appears.

3)Rotate the MENU Wheel 1 to select

"COUNTER MEMORY" and press it. Then, rotate the MENU Wheel 1 to "ON" and press it. ("M" appears when you return to normal screen.)

4)Rotate the MENU Wheel 1 to select

"COUNTER RESET" and press it. Then, rotate the MENU Wheel 1 to "YES" and press it. The counter resets to "0:00:00".

5)To return to normal screen, rotate the MENU Wheel 1 to "3EXIT" and press it.

6)After recording or playback, press 7 (, then 1 ). The tape automatically stops at or close to 0:00:00.

7)Press 3/8 & to start playback.

•The counter memory functions in both Fast- Forward and Rewind modes.

MENU SETTINGS

15