White to Audio |
Output 6 |
Yellow to Video
Output 7
Connector cover
A/V cable
TV
White to
Audio Input
VCR
Yellow to
Video Input
Tape Dubbing
1)Connect the camcorder and the VCR ( pg.
12, “Connections To A TV/VCR”). Set the Power Switch # to “PLAY” while pressing down the Lock Button ", turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.
Engage the VCR’s AUX and
2)Press 3/8 & to find a spot just before the edit- in point. Once it is reached, press 3/8 & again.
3)Press 3/8 & and engage the VCR’s Record mode.
4)Engage the VCR’s
•Repeat steps 2) through 4) for additional editing, then stop the VCR and camcorder when finished.
Using The Cassette Adapter (Optional)
Use this to play back a
1)Slide the latch 1 to open the compartment door, then insert the cassette and close the
compartment door 2.
•If the colour shown in the window 4 is green or red, turn the dial 5 in the direction of
“UNLOADING” so that colour changes to blue.
2)Turn the dial 5 in the direction of “LOADING” all the way until it stops.
•The colour shown in the window 4 changes from blue \ red \ green (indicating playback is possible).
3)Load the cassette adapter into the VCR and play the tape back.
•To record on a VCR using a compact cassette and the adapter, cover the adapter’s recording safety hole with Adhesive tape.
4)To unload the cassette, turn the dial 5 in the direction of “UNLOADING” all the way until it
stops.
• The colour shown in the window 4 changes from green \ red \ blue (indicating unloading is possible).
5)Slide the latch 1 to open the compartment door, then insert your finger in the hole 6, and push up and remove the cassette.
6)Close the compartment door 2.
| 2 Compartment door | ||
|
| 4 Window | |
Recording |
|
|
|
safety hole |
|
| 5 Dial |
|
|
| The protec- |
|
| 1 Latch | tion sheet is |
|
| affixed | |
|
|
| |
| 3 Gear | 7 Reels | |
|
| ||
Compact video cassette |
|
| |
|
|
| 6 Hole |
•If there is slack in the video tape when inserting the compact cassette into the
adapter, the tape may become damaged. To take up slack in the tape, turn the gear 3 in the direction of the arrow.
•During tape loading and unloading, do not touch the reels 7 for safety and tape protection.
BASIC FEATURES
13