SYSTEM MENU 2
DEMO MODE
Demonstrates certain functions automatically. Available when the Power Switch # is set to “
” or “
” and “DEMO MODE” is set to “ON” (factory- preset).
•To cancel demonstration, set "DEMO MODE" to “OFF”.
•Pressing MENU Wheel 1 directly accesses DEMO MODE menu while the demo is in progress.
•Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume.
•“DEMO MODE” remains “ON” even if the camcorder power is turned off.
•When a cassette is in the camcorder demonstration is not available.
•If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.
REC TIME
You can shoot a series of pictures, each slightly different, of the same object for a brief selected period of time (Animation). REC MODE should be set to “SP”.
Select the desired recording time and press the Recording Start/Stop Button ! after focusing on the subject.
•
•This function is cancelled when the power is turned off or when the cassette is ejected.
•To use this function, it is recommended that SCROLL in TITLE SETUP ( pg. 16) be set to “OFF”.
INT. TIME | SETTINGS | |
| ||
You can record sequentially at preset time spans. |
| |
Leaving the camcorder aimed at a specific |
| |
subject, you can record subtle changes over an |
| |
extended period of time |
| |
MODE should be set to “SP”. | MENU | |
(Please note that it is necessary to set the REC | ||
| ||
TIME (Animation) in the SYSTEM MENU before |
| |
performing the INT. TIME |
| |
Select the desired interval time and press the |
| |
Recording Start/Stop Button !. |
|
•Fade- or
•This function is cancelled when the power is turned off or when the cassette is ejected.
•To use this function, it is recommended that SCROLL in TITLE SETUP ( pg. 16) be set to “OFF”.
VCR MENU
V C R M E N U
C O U N T E R M E M O R Y O F F
C O U N T E R R E S E T Y E S
2E X I T
COUNTER MEMORY
Makes it easier to locate a specific tape segment.
1)Set the Power Switch # to "PLAY" while pressing down the Lock Button ".
2)Press the MENU Wheel 1 in. The VCR MENU screen appears.
3)Rotate the MENU Wheel 1 to select “COUNTER MEMORY” and press it. Then, rotate the MENU Wheel 1 to “ON” and press it. (“M” appears when you return to normal screen.)
4)Rotate the MENU Wheel 1 to select "COUNTER RESET” and press it. Then, rotate the MENU Wheel 1 to “YES” and press it. The counter resets to “0:00:00”.
5)To return to normal screen, rotate the MENU Wheel 1 to “3EXIT” and press it.
6)After recording or playback, press 7 (, then 1 ). The tape automatically stops at or close to 0:00:00.
7)Press 3/8 & to start playback.
•The counter memory functions in both Fast- Forward and Rewind modes.
17