JVC GR-FXM25 manual Fade/Wipe, Engagemode FADE- or WIPE-STANDBY, Start or END Recording

[Ex.: Fader]

Fade in

Fade out

Display

After 2 sec.

MOSAIC

		FADER
		MOSAIC
		SHUTTER
		SLIDE
OFF	OFF
(No indication)

EFFECT Button	Power
	Switch

Recording Start/Stop

Button

EN21

Fade/Wipe

These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end or when you enter Record–Standby mode.

1 SELECT OPERATION MODE Set the Power Switch to “PRO.”.

2 ENGAGEMODE FADE- OR WIPE-STANDBY

Press EFFECT to cycle through the modes as shown at left. Once the desired mode appears, it is selected and reserved.

•The selected mode’s name and its indication are displayed for approx. 2 seconds. Then the name

	disappears, and only the indication remains.	RECORDING
	START OR END RECORDING
3 Press the Recording Start/Stop Button to activate fade-
	in/out or wipe-in/out.
4
	MODETO CANCEL FADE- OR WIPE-STANDBY
	Press EFFECT repeatedly until “OFF” appears.
	•“OFF” is displayed for approx. 2 seconds and the
	fade/wipe standby mode is canceled.
	FADER
Fades in/out to a black screen.
	MOSAIC (Fader)
Gradually turns/returns the picture into/from a mosaic
pattern.
	SHUTTER (Wipe)
A black screen moves in from the top and bottom, closing
over the image like a shutter, or a new image pushes open
the black screen vertically from the centre.
	SLIDE (Wipe)
A black screen moves in from the left to gradually cover
the image, or a new image moves in from right to left.

NOTES:

●Pressing and holding the Recording Start/Stop Button allows you to vary the length for the image during fade in/out or wipe in/out.

●The screen becomes slightly reddish when the Fade/ Wipe is used with Sepia (☞ pg. 23).

●With the Electronic fog filter mode (☞ pg. 23) engaged, the image fades in/out to a white screen.