JVC GR-SXM260A, GR-SX210A, GR-SX21EA, GR-SXM26EA, GR-SXM460A 12 EN, Recording Format Setting

Set the Power Switch to “PRO.”. Press MENU.

12 EN

Select Wheel

Power Switch

MENU Button

Display: when a VHS cassette is loaded.

GETTING STARTED (cont.)

Recording Format Setting

Set the recording format according to the format of the tape used or type of recording you wish to perform.

NOTE:

Before performing the following steps, make sure that the recording mode is set to “SP” (
pg. 10).

1

2 If a VHS cassette is loaded . . .

.... rotate the Select Wheel to move the highlight bar

to “S-VHS ET”, then press it. The S-VHS ET Setting Menu appears.

If an S-VHS cassette is loaded . . .

.... rotate the Select Wheel to move the highlight bar

to “S-VHS”, then press it. The S-VHS Setting Menu appears.

4NEX T	ON
D . ZOOM
T E LE MACRO	OF F
S – VHS E T	OF F
TAPE L ENGTH	T 3 0
4RE TURN

Menu Screen

When an S-VHS cassette is loaded: S-VHS

3 Rotate the Select Wheel to set to either of the parameters, then press it. Press the Select Wheel again. The Menu Screen reappears with the highlight bar on “RETURN”.

In the S-VHS ET Setting Menu,

ON : Records with S-VHS picture quality on a VHS cassette (factory-preset). This is called Super

S – VHS E T

		Setting Menu
ON
OF F
EX I T
T E LE MACRO	OF F
TAPE L ENGTH	T 3 0	Menu Screen

4RE TURN

Normal Screen

VHS ET (Expansion Technology).

OFF : Records in VHS.

In the S-VHS Setting Menu,

ON : Records in S-VHS on an S-VHS cassette (factory-preset).

OFF : Records in VHS on an S-VHS cassette.

4 Press the Select Wheel to close the Menu Screen.

•When the S-VHS ET mode is engaged, “S-ET” is displayed.

•During S-VHS record mode, “S” is displayed.

•When S-VHS ET or S-VHS recording starts, “S-VHS REC.” is displayed for approx. 3 seconds.

NOTES:

●If a cassette is not loaded, “S-VHS” will be displayed in the Menu Screen.

●S-VHS/S-VHS ET recording is not possible when the recording mode is set to “LP” (
pg. 10).