46 EN | USING THE REMOTE CONTROL UNIT (cont.) |
Power
Switch
Remote sensor
| REW |
| FF |
| PLAY |
| R.A.EDIT |
| ON/OFF |
| IN/OUT |
EDIT IN/OUT | CANCEL |
ON/OFF |
|
| ||
(provided with | OR | (optional) | |
|
| ||
SXM46EA only) |
|
| |
| I N | OUT |
|
1 | 0 : 0 0 : 2 5 | - | |
2 |
|
|
|
3 |
|
|
|
4 |
|
|
|
5 |
|
|
|
6 |
|
|
|
7 |
|
|
|
8 |
| 0 : 0 0 : 2 5 |
|
COUNTER |
| ||
TOTAL | 0 : 0 0 : 0 0 |
|
SELECT SCENES
4 Point the remote control at the camcorder’s remote sensor. Press PLAY (4), then press R.A.EDIT ON/OFF
5 Press REW (2) or FF (3) to locate the beginning of the scene you want, then press EDIT IN/OUT (RM- V716U)/IN/OUT
6 Press REW (2) or FF (3) to locate the end of the scene and press EDIT IN/OUT
•The data appears under “OUT” on the display.
•The total time of the registered scene(s) is displayed at the bottom of the screen.
7 Repeat steps 5 and 6 for each additional scene (as many as 8).
8 To make corrections, press CANCEL during steps 5 and 6 to erase the most recently registered point.
NOTES:
●There must be at least one second between an
●To ensure correct operation, there should be at least
15 seconds between an
●Blank portions of a tape cannot be registered as
●If it takes more than 5 minutes to search for an
●Pressing R.A.EDIT ON/OFF
●Leave a small margin for error around each
●Turning off the camcorder’s power erases all registered in- and
| I N | OUT |
1 | 0 : 0 0 : 2 5 | 0 : 0 1 : 0 5 |
2 | 0 : 0 3 : 1 8 | 0 : 0 3 : 3 1 |
3 | 0 : 0 2 : 3 3 | 0 : 0 2 : 5 3 |
4 | 0 : 0 4 : 1 1 | - |
5 |
|
|
6 |
|
|
7 |
|
|
8 |
| 0 : 0 4 : 1 1 |
COUNTER | ||
TOTAL | 0 : 0 1 : 1 3 |