JVC GR-SXM520 During recording, the indications do not appear, Tape will not eject, Fingerprints

Page 41

EN41

SYMPTOM

POSSIBLE CAUSE(S)

OTHER

During recording, the indications do not appear.

●Press DISPLAY for longer than 1 second to make the indications appear (☞ pg. 17).

The tape will not eject.

● The battery pack is running low.

 

● If the LCD monitor is not open over 60 degrees, the EJECT

 

Switch does not function.

 

 

Some functions are not available.

● The Power Switch is set to “AUTO”.

 

● Certain combinations of modes or effects are not possible

 

to use.

 

 

Vertical white lines appear when

● This sometimes occurs when the contrast between the

shooting a very bright object.

background and the object is great. It is not a defect of the

 

camcorder.

 

 

Bright, crystal-shaped spots appear in

● Sunlight is directly entering the lens. This is not a defect of

the LCD monitor and the viewfinder.

the camcorder.

 

 

The rear of the LCD monitor is hot.

● The light used to illuminate the LCD monitor causes it to be

 

hot. Close the LCD monitor to turn it off or set the Power

 

Switch to “OFF”, and let the unit cool down.

 

 

Colored bright spots appear all over

● The LCD monitor and the viewfinder are made with high-

the LCD monitor or the viewfinder.

precision technology. However, black spots or bright spots

 

of light (red, green or blue) may appear constantly on the

 

LCD monitor or in the viewfinder. These spots are not

 

recorded on the tape. This is not due to any defect of the

 

unit. (Effective dots: more than 99.99 %.)

 

 

The indicators and the picture color

● This may occur when the surface or the edge of the LCD

on the LCD monitor are not clear.

monitor is pressed.

 

 

The LCD monitor, the viewfinder and

● Wipe them gently with a soft cloth. Gently wipe in a

the lens have become dirty (ex.

semicircular motion, as wiping strongly spreads the stain

fingerprints).

and it won’t come out easily.

 

 

The picture is blurred in the Quick

● This is normal while recording in the EP mode. Some noise

Review or Retake mode.

may be present while recording in the SP mode (☞ pg. 12).

 

 

An error number (i.e. E03) appears.

● Turn the camcorder’s power off, then disconnect the power

 

source. After a few minutes, try turning the power on again.

 

If the error number still appears in the viewfinder, consult

 

your nearest JVC dealer.

 

 

The image is out of focus.

● The diopter needs to be adjusted (☞ pg. 15).

 

● The scene being shot is adversely affecting the operation of

 

Auto Focus (☞ pg. 29).

 

 

The date and time displays

● If you remove the power source from the camcorder while

disappear.

the power is on, all settings and selections are erased. Make

 

sure to turn the camcorder’s power off before disconnecting

 

the power source.

 

 

The wrong date and time are

● If you have not performed Date/Time Setting (☞ pg. 11),

displayed/recorded.

the date and time are not displayed/recorded correctly. Be

 

sure that Date/Time setting is carried out.

Even though the lens cover is open, the Lens Cover Warning indicator blinks.

●The Lens Cover Warning indicator may blink when the camcorder is used in dark areas, regardless of the position of the lens cover.

Page 40 Page 42
Image 41
Page 40 Page 42
Contents GR-SXM520 It is recommended that you AA-V16U AC Power Adapter/Charger should be used withEN3 Important Product Safety Instructions If the product has been dropped or damaged in any way To avoid personal injuryTo remove the battery pack Using the battery packCassettes marked and can be used with this camcorder Major Features EN7Charge Marker PowerCharging the Battery Pack Using AC Power Using the Battery PackUsing a CAR Battery Slide Battery Release and pull out the battery pack10 EN Clock Lithium Battery Insertion/RemovalGetting Started Loading/Unloading a CassettePress the Select Wheel to close the Menu Screen Date/Time SettingsEN Getting Started Recording Mode SettingTape Length Setting Recording Format Setting Cont 14 ENRecordingPlayback VHS VCR with Sqpb FunctionViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Tripod MountingBasic Recording Switches off the camcorderShooting While Watching Viewfinder Shooting While Watching LCD MonitorLCD MONITOR/VIEWFINDER Indications Journalistic ShootingInterface Shooting Feature Picture Stabilizer EN Recording Basic FeaturesZoom Zoom OutFeature 5Sec. Rec 5-sec. Recording Feature Quick ReviewTo check the end of the last recording To re-record certain segmentsFeature Video Light Basic FeaturesTo brighten the scene when natural lighting is too dim Set Light OFF/AUTO/ON as requiredFades in/out to a black screen Recording Advanced Features EN21Fade/Wipe Effects Nega Posi mode Recording Advanced Features22 EN Program AE With Special EffectsRotate the Select Wheel until the desired number Using Menus For Detailed AdjustmentPress the Select Wheel. The Menu Screen Appears Menu Screen Available Using The Select Wheel Advanced FeaturesMenu Screen Available Using The Menu Button 24 ENRecords in VHS on a VHS or S-VHS cassette pg VHS ET is preset to OFFRefer to Animation and Time-Lapse pg Refer to Time-Lapse pgInstant Titles 26 ENDate/Time Insert Time-Lapse AnimationExposure Control 28 ENAuto Focus FocusingManual Focus Patterns that are regularly repeated30 EN Select Auto in . Or set the Power Switch to AutoManual White Balance Operation Video light or similar type of lighting is usedEN31 Playback Basic Playback32 EN Playback FeaturesCassette Adapter VHS Playpak Using The Cassette Adapter EN33Playback Connections When connecting the cables, open this cover34 EN Tape Dubbing Basic ConnectionsButtons 36 ENFunctions Release Feature Animation and Time-LapseSet Insert Editing Using the Remote Control Unit38 EN For Insert Editing and Audio Dubbing Audio Dubbing40 EN Review or Retake mode Indicators and the picture colorAn error number i.e. E03 appears During recording, the indications do not appear42EN Index Controls, Connectors And IndicatorsPower Switch Video Light SwitchBattery Release Switch Power Lamp ........................................ pgIndex 44 ENIndications During Recording IndicationsVolume Speaker Volume Cassette IndicatorIndications During Playback Displayed during Insert EditingUse only the following batteries 46 ENInformation During use To avoid hazardStore cassettes Vertically, in their original cases48 EN Terms After Use Cleaning The Camcorder50 EN Viewfinder on Video light Signal system Power sourceOperating Temperature WeightAlimentación 52 ENCarga DE LA Bateria USO DE LA BateriaPara extraer la batería Deslice Battery Release y extraiga la bateríaUtilización de la batería For Servicing Only in U.S.A 54 ENLimited Warranty Warranty Only in U.S.AGR-SXM520

GR-SXM520 specifications

The JVC GR-SXM520 is a compact yet versatile camcorder designed for both novice and experienced videographers looking for a reliable tool to capture high-quality video footage. This device combines a range of features, technologies, and characteristics that make it stand out in its category.

At the heart of the GR-SXM520 is its advanced 1/6-inch CCD sensor, which delivers vibrant colors and sharp image quality, even in challenging lighting conditions. The camcorder supports a resolution of 640 x 480 pixels, ensuring that users can capture clear, detailed images for their projects. The 12x optical zoom lens provides ample versatility, allowing users to zoom in on distant subjects without sacrificing clarity. This feature is particularly useful for capturing wildlife, sports, or any moments that require a little extra reach.

One of the notable technologies integrated into the JVC GR-SXM520 is the Image Stabilization feature. This technology works to minimize the effects of camera shake, ensuring that the footage remains smooth and professional-looking. It is especially valuable for handheld shooting, where maintaining a steady hand can be a challenge.

The camcorder is equipped with a 2.5-inch LCD display that allows users to easily frame their shots and navigate through various settings. The display is bright and clear, providing an excellent preview of the recorded footage. Additionally, the GR-SXM520 comes with an array of user-friendly controls, making it easy to adjust settings on the fly.

Audio quality is another strong point for the JVC GR-SXM520. It features a built-in stereo microphone that captures sound crisply, making it suitable for vloggers, event recording, and more. For those who wish to enhance audio further, the camcorder also has a microphone input, allowing external mics to be connected for improved sound capture.

The camcorder is equipped with various recording modes, including the option to record in LP (Long Play) mode, which extends recording time without compromising significant video quality. The GR-SXM520 also features an Easy Mode, which simplifies the recording process for beginners by automatically adjusting settings for optimal results.

Built for mobility, the compact design of the JVC GR-SXM520 makes it lightweight and easy to carry, allowing users to take it on trips or to events without hassle. With a robust battery life, the camcorder supports extended shooting sessions, catering to the needs of those who wish to document memorable moments over longer periods.

Overall, the JVC GR-SXM520 is an exceptional camcorder that balances quality, ease of use, and functionality, making it a valuable addition to any videographer’s toolkit. Whether for personal use or professional projects, this camcorder offers the features necessary to deliver stunning video footage.
Top Page Image Contents