JVC GR-SXM527 Journalistic Shooting, Interface Shooting, LCD MONITOR/VIEWFINDER Indications

Page 17

EN17

NOTES:

●When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power.

●The cassette holder cannot be opened unless a power supply is attached.

●There may be a delay after you slide EJECT until the cassette holder opens. Do not use force.

●The time required to calculate the remaining tape length, and the accuracy of the calculation, may vary according to the type of tape used.

●The tape remaining time indicator is correct only if the correct tape length has been selected (☞ pg. 12).

●“TAPE END” appears when the tape reaches its end, and the power goes off automatically if left in this condition for 5 minutes. “TAPE END” also appears when a cassette whose tape is already at its end is loaded.

●If the Record-Standby mode continues for 5 minutes without performing Zoom or any other operations, the camcorder’s power shuts off automatically. Set the Power Switch to “OFF”, and then back to “CAMERA” to turn the camcorder on again.

●If the Recording Start/Stop button is pressed after the Record-Standby mode has continued for over 5 minutes, recording may not start immediately.

●If you are recording on a cassette from the middle (such as when a tape is removed and re-inserted during recording), use the Retake function (☞ pg. 19) to find the end of the last recording so you do not erase any of it.

●While shooting, sound is not heard from the speaker.

JOURNALISTIC SHOOTING

In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270° (90° downward, 180° upward).

INTERFACE SHOOTING

The person you shoot can view himself/herself in the LCD monitor, and you can even shoot yourself while viewing your own image in the LCD monitor.

Open the LCD monitor and tilt it upward to 180 degrees so that it faces forward. When the LCD monitor is tilted upward to an angle of over approx. 105 degrees, the monitor image is inverted vertically, and the viewfinder also switches on. Point the lens toward the subject (yourself when self- recording) and start recording.

During Interface Shooting, the monitor image and indications do not appear inverted as they would when viewing a mirror.

NOTE:

The monitored image can be viewed on the LCD monitor and in the viewfinder.

LCD MONITOR/VIEWFINDER INDICATIONS

Press DISPLAY for more than 1 second to make the following indications appear/disappear from the camcorder’s display: cassette warning, tape remaining time, battery pack remaining power indicator and tape length indicator (☞ pg. 44, 45).

NOTE:

Self-RecordingEven if the indications are off, the tape remaining time appears blinking when the tape is near its end, and the

battery pack remaining power indicator appears blinking when the power is almost gone.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents GR-SXM527 It is recommended that you AA-V16U AC Power Adapter/Charger should be used withEN3 Important Product Safety Instructions If the product has been dropped or damaged in any way To avoid personal injuryTo remove the battery pack Using the battery packCassettes marked and can be used with this camcorder Major Features EN7Charge Marker PowerCharging the Battery Pack Using AC Power Using the Battery PackUsing a CAR Battery Slide Battery Release and pull out the battery pack10 EN Clock Lithium Battery Insertion/RemovalGetting Started Loading/Unloading a CassettePress the Select Wheel to close the Menu Screen Date/Time SettingsEN Getting Started Recording Mode SettingTape Length Setting Recording Format Setting Cont 14 ENRecordingPlayback VHS VCR with Sqpb FunctionViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Tripod MountingBasic Recording Switches off the camcorderShooting While Watching Viewfinder Shooting While Watching LCD MonitorLCD MONITOR/VIEWFINDER Indications Journalistic ShootingInterface Shooting Feature Picture Stabilizer EN Recording Basic FeaturesZoom Zoom OutFeature 5Sec. Rec 5-sec. Recording Feature Quick ReviewTo check the end of the last recording To re-record certain segmentsFeature Video Light Basic FeaturesTo brighten the scene when natural lighting is too dim Set Light OFF/AUTO/ON as requiredFades in/out to a black screen Recording Advanced Features EN21Fade/Wipe Effects Nega Posi mode Recording Advanced Features22 EN Program AE With Special EffectsRotate the Select Wheel until the desired number Using Menus For Detailed AdjustmentPress the Select Wheel. The Menu Screen Appears Menu Screen Available Using The Select Wheel Advanced FeaturesMenu Screen Available Using The Menu Button 24 ENRecords in VHS on a VHS or S-VHS cassette pg VHS ET is preset to OFFRefer to Animation and Time-Lapse pg Refer to Time-Lapse pgInstant Titles 26 ENDate/Time Insert Time-Lapse AnimationExposure Control 28 ENAuto Focus FocusingManual Focus Patterns that are regularly repeated30 EN Select Auto in . Or set the Power Switch to AutoManual White Balance Operation Video light or similar type of lighting is usedEN31 Playback Basic Playback32 EN Playback FeaturesCassette Adapter VHS Playpak Using The Cassette Adapter EN33Playback Connections When connecting the cables, open this cover34 EN Tape Dubbing Basic ConnectionsButtons 36 ENFunctions Release Feature Animation and Time-LapseSet Insert Editing Using the Remote Control Unit38 EN For Insert Editing and Audio Dubbing Audio Dubbing40 EN Review or Retake mode Indicators and the picture colorAn error number i.e. E03 appears During recording, the indications do not appear42EN Index Controls, Connectors And IndicatorsPower Switch Video Light SwitchBattery Release Switch Power Lamp ........................................ pgIndex 44 ENIndications During Recording IndicationsVolume Speaker Volume Cassette IndicatorIndications During Playback Displayed during Insert EditingUse only the following batteries 46 ENInformation During use To avoid hazardStore cassettes Vertically, in their original cases48 EN Terms After Use Cleaning The Camcorder50 EN Viewfinder on Video light Signal system Power sourceOperating Temperature WeightAlimentación 52 ENCarga DE LA Bateria USO DE LA BateriaPara extraer la batería Deslice Battery Release y extraiga la bateríaUtilización de la batería For Servicing Only in U.S.A 54 ENLimited Warranty Warranty Only in U.S.AGR-SXM527
Top Page Image Contents