JVC GR-SXM527 Indications During Playback, Cassette Indicator, Displayed during Insert Editing

Indications During Playback

1 2 3 4 5 6 7

	S–E T		SP	4
TBC
		–	1 : 2 3 : 4 5
				AT

M– 0 : 1 2 : 3 4

VOLUME – – – – – –6– – – – – +

98

Warning Indications

				EN	45
1 •		: Cassette Indicator
	Displayed when a tape is loaded.			☞ pg. 38
•w: Insert Editing Indicator
	Displayed during Insert Editing.
2 TBC Indicator				☞ pg. 32
3 Recording Format Indicator (S/S-ET)			.....	☞ pg. 13
4 Tape Counter			☞ pg. 32, 38
5 Recording Mode Indicator (SP/EP)				☞ pg. 12
6 Tape Running Indicator
4		: Playback
3 : Fast-Forward/Shuttle Search
2 : Rewind/Shuttle Search
6		: Pause
e4 : Audio Dubbing
7 Tracking Indicator				☞ pg. 32
8 Tape Counter				☞ pg. 38
Displayed only during Insert Editing.
9 •BRIGHT: Bright Level Indicator				☞ pg. 31
•VOLUME: Speaker Volume				☞ pg. 31
	Indicator

Indications		Function
	Displays the battery remaining power.
	Remaining power level: high. It does not necessarily mean that the battery
	pack is fully charged.
	Remaining power level: exhausted
	As the battery power comes close to nil, the battery indicator			blinks
	(battery power warning).
	When the battery power is exhausted, power turns off automatically.
	Blinks when no cassette is loaded, or when the Erase Protection tab is not in
	the position that allows recording.		(☞ pg. 10)
	Blinks for approx. 10 seconds when the power is turned on. This display also
	blinks when the clock (lithium) battery is either not installed or has discharged.
	Install or replace the old battery with a new one.		(☞ pg. 10)
TAPE END	Appears when the tape ends during recording, playback or fast-forward.
			(☞ pg. 17)
LENS COVER	Blinks for approx. 5 seconds when the camcorder is turned on with the lens
	cover closed.		(☞ pg. 16)
CONDENSATION	These 2 warnings appear alternately every 3 seconds if condensation occurs. In this
	case, all functions except tape eject and power on/off are disabled. Turn the unit off
PLEASE WAIT	(without removing the power supply), wait a few minutes for the warnings to clear,
	and turn it on again.
TAPE HEAD IS DIRTY	These 2 warnings appear alternately every 3 seconds if dirt is detected on the
USE CLEANING	heads during recording. In this case, use an optional cleaning cassette. If the
CASSETTE	warning remains after cleaning, consult your nearest JVC dealer.
E01 — E06	The error indications (E01 — E06) show what type of malfunction has occured.
SAFEGUARD FUNCTION	If an error indication and warning appear, turn the unit off, remove the power
	supply (battery, etc.) and wait a few minutes for them to clear. When it does,
HAS BEEN ACTIVATED
	you can resume using the camcorder. If the indication remains, consult your
REATTACH BATTERY
	nearest JVC dealer.