JVC GR-SXM920 specifications 32 EN, Advanced Features

32EN

RECORDING

AdvancedFeatures(cont.)

Menu Screen Available Using The MENU Button (cont.)

S-VHS***	ON	Records in S-VHS on a VHS or S-VHS cassette (☞ pg. 15).
(S-VHS ET***)
	OFF	Records in VHS on a VHS or S-VHS cassette (☞ pg. 15).
TAPE LENGTH*	Allows you to set the tape length depending on the tape used (☞ pg. 14).
PICTURE**	Refer to “Picture Mode Setting” (☞ pg. 22).
SNAPSHOT	FULL	Displayed with the System Select Switch set to either “VIDEO”
	PIN-UP	(☞ pg. 23) or “D.S.C.” (☞ pg. 21).
	MULTI-4	Displayed only with the System Select Switch set to “D.S.C.”
	MULTI-9	(☞ pg. 21).
REC TIME*	Refer to “Animation” (☞ pg. 34) and “Time-Lapse” (☞ pg. 35).
INT. TIME	Refer to “Time-Lapse” (☞ pg. 35).
TITLE LANG.*	Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
	of Instant Titles (☞ pg. 33).
DATE/TIME	Allows you to set the current date and time (☞ pg. 13).
JLIP ID NO.	This number is necessary when connecting the camcorder to a device such as a computer
	using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.
DEMO MODE*	ON	Demonstrates certain functions such as Fade/Wipe, etc. When
		“DEMO MODE” is set to “ON” and the Menu Screen is closed,
		the demonstration starts.
		Operating the Power Zoom Lever during the demonstration
		stops the demonstration temporarily. If the Power Zoom Lever is
		not moved for more than 1 minute after that, the demonstration
		will resume.
		NOTE:
		When a tape whose Erase Protection tab is in the position that
		allows recording is loaded in the camcorder, demonstration is
		not available.
	OFF	Automatic demonstration will not take place.

*Activated only with the System Select Switch set to “VIDEO”. If the System Select Switch is set to “D.S.C.”, this function will not be activated although the highlight bar will move on the Menu Screen like the setting procedure.

**Activated only with the System Select Switch set to “D.S.C.”. If the System Select Switch is set to “VIDEO”, this function will not be activated although the highlight bar will move on the Menu Screen like the setting procedure.

Functions listed without */** are available with the System Select Switch set to either “D.S.C.” or “VIDEO”.

***S-VHS ET is displayed when a VHS cassette is loaded, and S-VHS is displayed when an S-VHS cassette is loaded (☞ pg. 15). If a cassette is not loaded, “S-VHS” will be displayed in the Menu Screen.

S-VHS ET is preset to “OFF”.

: Factory-preset