JVC GY-DV5100 instruction manual Menu Screen Configuration, Setting Menu Screens

11. MENU SCREENS

11-1 Menu Screen Configuration

11. MENU SCREENS

11-2 Setting Menu Screens

The Menu Screen consists of multiple layers of menu screens as shown below. The menu screen to be set is selected from the TOP MENU in accordance with the function or purpose.

The items on the menu screens differ with the Camera mode and the VTR mode. The contents of set items are stored in the GY- DV5100’s memory and are retained even when the power is turned off.

The FILE MANAGE menu screen can be used to store the menu setting contents in two types of files (FILE A, FILE B) on the GY- DV5100. When saving menu setting contents that remain more or less fixed, these are stored in FILE A or FILE B. A saved file (FILE A or B) can be read out on the FILE MANAGE menu screen.

––– MENU –––			––– CAMERA OPERATION –––
CAMERA OPERATION..			SHUTTER	STEP
CAMERA PROCESS..		CAM	FAW	NONE
AUDIO/VIDEO..			GAIN L	0dB
LCD/VF..			GAIN M	9dB
TC/UB/CLOCK..			GAIN H	18dB
OTHERS..			LOLUX GAIN	30dB
FILE MANAGE..			SMOOTH TRANS	ON
MENU ALL RESET	CANCEL		SPOT L/BACK L	MIDDLE
EXIT			ASPECT RATIO	4:3
			PAGE BACK

STATUS button

Make the settings while observing the LCD monitor or the viewfinder screen. If the OUTPUT CHAR. item on the OTHERS (1/2) screen is set to ON, the menu screen can also be viewed on a monitor connected to the MONITOR OUT or Y/C OUT connector.

1. Set the POWER switch to ON.

2. Set the mode of the GY-DV5100 with the MODE switch.

(Camera mode or VTR mode)

3. Press the STATUS button for 1 second or longer.

● The TOP MENU screen appears.

4. Select the menu screen to be set.

Rotate the SHUTTER dial to align the cursor ( ) with the

TOP MENU screen (CAM)

CAMERA OPERATION screen

	––– CAMERA PROCESS –––		––– ADVANCED PROCESS –––		––– SKIN COLOR ADJUST –––
	MASTER BLACK	NORMAL	CINE MODE	OFF
CAM	DETAIL	NORMAL	COLOR MATRIX	STANDARD
	DTL.V/H BALANCE	NORMAL	GAMMA	NORMAL
	DTL.FREQUENCY	MIDDLE	FLARE<MASTER>	NORMAL
	SKIN DTL.DETECT	OFF	FLARE<R>	NORMAL
	V.RESOLUTION	NORMAL	FLARE<B>	NORMAL
	WHITE CLIP	108%	SKIN COLOR ADJUST..
	KNEE POINT	100%	PAGE BACK		SKIN COLOR DET.	STOP
	ADVANCED PROCESS..				SKIN COLOR RANGE	NORMAL
	PAGE BACK				PAGE BACK
	CAMERA PROCESS screen		ADVANCED PROCESS screen		SKIN COLOR ADJUST screen

SHUTTER

SHUT- MENU TER

dial

STA

menu screen to be set, and then press the SHUTTER dial.

● The selected menu screen appears.

5. Select the menu item on the menu screen.

Rotate the SHUTTER dial to align the cursor ( ) with the

item to be set, and then press the SHUTTER dial.

● The setting area of the selected item starts blinking, and

the setting can now be made.

––– MENU –––

AUDIO/VIDEO.. LCD/VF.. TC/UB/CLOCK.. OTHERS..

FILE MANAGE..

MENU ALL RESET CANCEL EXIT

–––	AUDIO/VIDEO	–––		––– LCD/VF –––
TEST TONE		OFF		BATTERY INFO	VOLTAGE
AUDIO	MODE	48K		TAPE REMAIN	ON
A.OUT	AT SEARCH	ON		TC/UB	ON
CH1 FRONT VR		ENABLE		AUDIO	ON
WIND CUT		OFF		LCD COLOR	NORMAL
AUDIO	REF.LEVEL	–20dB		LCD PEAKINGS	NORMAL
AUDIO	SELECT	CH1/2		PAGE BACK
AUDIO	MONITOR	MIX
SET UP		7.5%	VTR
PAGE BACK

Cursor	MENU screen
		––– MENU –––
	CAMERA OPERATION..
	CAMERA PROCESS..
	AUDIO/VIDEO..
	LCD/VF..
	TC/UB/CLOCK..

6. Change the setting.

Rotate the SHUTTER dial to change the setting, and then

press the SHUTTER dial.

● The setting area stops blinking and the setting is entered.

■To change multiple items, repeat the procedures in steps 5. and 6. above.

TOP MENU screen (VTR) AUDIO/VIDEO screen

	––– LCD/VF(1/2) –––
	ZEBRA	70–80%
CAM	F.NO/IRIS IND.	OFF
	FILTER	ON
	SAFETY ZONE	ON
	CENTER MARK	OFF
	NEXT PAGE
	PAGE BACK

LCD/VF screen (1/2)

––– TC/UB/CLOCK –––

TC PRESET	00:00:00:00
	EXECUTE
UB PRESET	00 00 00 00
	EXECUTE

DROP/NON DROP DROP

HEADER REC..

TIME/DATE..

PAGE BACK

LCD/VF screen (VTR)

––– LCD/VF(2/2) –––		––– HEADER REC –––
BATTERY INFO	VOLTAGE	START KEY	DISABLE
TAPE REMAIN	ON	TC DATA	00:00:00:00
TC/UB	ON		EXECUTE
AUDIO	ON	UB DATA	00 00 00 00
LCD COLOR	NORMAL		EXECUTE
LCD PEAKINGS	NORMAL	BARS TIME	30SEC
PAGE BACK		BLACK TIME	30SEC
		PAGE BACK

LCD/VF screen (2/2)		HEADER REC screen
––– TIME/DATE –––		––– CLOCK ADJUST –––
DISPLAY	ON	DATE(MM/DD/YY)	08/20/02
DISPLAY MODE	BARS+CAM	TIME	09:33
DATE REC	OFF	PAGE BACK
DISPLAY STYLE	DATE+TIME
DATE STYLE	MM/DD/YY
TIME STYLE	24HOUR
SEC DISPLAY	ON
CLOCK ADJUST..
PAGE BACK

OTHERS..
FILE MANAGE..
MENU ALL RESET	CANCEL
EXIT

TOP MENU screen

	Item		Setting
–––		CAMERA OPERATION			–––
	SHUTTER			STEP
	FAW			PRESET
	GAIN L			6dB
	GAIN M			9dB
	GAIN H			ALC
	LOLUX GAIN			30dB
	SMOOTH TRANS			ON
	SPOT L/BACK L			MID
	ASPECT RATIO		4:3
	PAGE BACK

7.Return to the TOP MENU.

Rotate the SHUTTER dial to align the cursor () with the PAGE BACK item, and then press the SHUTTER dial.

■To change settings on other menu screens, repeat the procedures in steps 4. to 7. above.

■To save the set contents in FILE A or B, select the FILE MANAGE menu screen and perform the operations for saving to file. ☞ See “FILE MANAGE Menu Screen” on page 73.

8.To return to the normal screen after completing the settings, use either of the following methods.

●Press the STATUS button or

●Return to the TOP MENU screen and align the cursor () with the EXIT item, and then press the SHUTTER dial.

TC/UB/CLOCK screen

––– OTHERS(1/2)	–––
OUTPUT CHAR.	OFF
DV REC TRIGGER	OFF
LONG PAUSE TIME	5MIN
REM FF/REW MODE	FF/REW
STEP SLOW MODE	FRAME
NEXT PAGE
PAGE BACK

OTHERS screen

––– FILE MANAGE –––

LOAD FILE	A
LOAD	CANCEL
STORE FILE	A
STORE	CANCEL
RESET FILE	A
RESET	CANCEL
PAGE BACK

TIME/DATE screen			CLOCK ADJUST screen
–––	OTHERS(2/2)	–––
ALARM	VR LEVEL	HIGH
BATTERY TYPE		14.4V
FRONT	TALLY	BLINK
BACK TALLY		BLINK
PAGE BACK
DRUM HOUR		00200

OTHERS screen

CAMERA OPERATION MENU screen

FILE MANAGE screen

7172