JVC GR-FXM333, GR-FXM555 Manual White Balance Operation, SET Manual White Balance, Enter Setting

White paper

EN33

Manual White Balance Operation

If the camera is operating in PRO. mode, perform a Manual White Balance when shooting under various types of lighting.

Select Dial

Display

4NEXT

M. W. B. AUTO

D . ZOOM ON TELE MACRO OFF DATETIME TAPE LENGTH T45

4RETURN

M.W.B.

AUTO

: FINE

: CLOUD

: HALOGEN

MWB

Power Switch

Menu Screen

M.W.B. Menu

	SELECT OPERATION MODE
1 Follow steps 1 through 4 of the white balance
	adjustment (☞ pg. 32), and select “MWB”.
	SET MANUAL WHITE BALANCE
2 Hold a sheet of plain white paper in front of the
	subject. Adjust zoom or position yourself so that the
	white paper fills the screen.
	ENTER SETTING
3 Press the Select Dial until “MWB” begins blinking.
	•When the setting is completed, “MWB” stops
		RECORDING
4 Press the Select Dial again to close the Menu Screen.
	blinking, and the Menu Screen reappears with the
	highlight bar on “RETURN”.
	CLOSE MENU SCREEN
To Change The Tint For Recording . . .
.... in step 2, substitute coloured paper for white. The
white balance is adjusted based on the colour,
changing the tint. Red paper — deeper green; blue
paper — orange; yellow paper — deeper purple.

NOTES:

● In step 2, it may be difficult to focus on the white paper

in some circumstances. In such a case, adjust focus

manually (☞ pg. 31).

● A subject can be shot under various types of lighting

conditions indoors (natural, flourescent, candlelight,

etc.). Because the colour temperature is different

depending on the light source, the tint of the subject will

differ depending on the white balance settings. Use this

function for a more natural result.

● Once you adjust white balance during Manual White

EXIT

Balance operation, the setting is retained even if the

power is turned off or the battery removed.