JVC GR-AXM80 manual Picture Stabilizer, Exposure Control

24EN

RECORDINGAdvancedFeatures(cont.)

Picture Stabilizer

This feature compensates for unstable images caused by camera-shake, particularly noticeable at high magnifica- tion.

PICTURE STABILIZER

ACTIVATE PICTURE STABILIZER

1 Press PICTURE STABILIZER. “” appears in the LCD monitor or the viewfinder.

•To switch off the Picture Stabilizer, press PICTURE STABILIZER. The indicator disappears.

NOTES:

● Accurate stabilization may not be possible if hand shake is excessive, or under the following conditions:

• When shooting subjects with vertical or horizontal stripes

• When shooting dark or dim subjects

• When shooting subjects with excessive backlighting

• When shooting scenes with movement in various directions

•When shooting scenes with low-contrast backgrounds

●Switch off Picture Stabilizer when recording with the camcorder on a tripod.

+02

LCD monitor or viewfinder

Exposure Level Indicator

To brighten the image

Exposure Control

This feature automatically adjusts the iris for the best available picture quality, but you can override and make the adjustment manually.

SELECT MODE

1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

BRIGHTEN IMAGE

2 Press + (maximum +06). The Exposure level indicator appears in the LCD monitor or the viewfinder.

OR . . .

DARKEN IMAGE

Press – (maximum –06). The Exposure level indicator appears in the LCD monitor or the viewfinder.

When you want to return to the factory setting . . .

RESTORE INITIAL SETTING

3 Press + and – simultaneously. The standard setting is immediately restored and the Exposure level indicator disappears.