JVC GR-AXM217UM manual After Use, Cleaning The Camcorder

Page 50

Set the Power Switch to “POWER OFF” to turn off the camcorder.

50ENUSERMAINTENANCE

LENS COVER Open/Close Ring

BATTERY RELEASE

Set to “POWER OFF”.

				Remove.
				Remove.

PUSH Button			EJECT Switch

NOTES:

After Use

1

2 Open the LCD monitor to an angle of over 60 degrees. Slide EJECT to open the cassette holder, then remove the cassette.

3 Close and lock the cassette holder by pressing PUSH.

4 Close and lock the LCD monitor.

5 Slide BATTERY RELEASE to remove the battery pack.

6 Turn the LENS COVER Open/Close Ring to close the lens cover.

Cleaning The Camcorder

1 CLEAN EXTERIOR Wipe gently with a soft cloth.

•Put cloth in diluted mild soap and wring it well to wipe off heavy dirt, then wipe again with a dry cloth.

2 CLEAN LCD MONITOR

Open the LCD monitor and wipe it gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

3 CLEAN LENS

Blow it with a blower brush, then wipe it gently with lens cleaning paper.

4 REMOVE EYEPIECE

Turn the eyepiece counterclockwise and pull it out.

5 CLEAN VIEWFINDER Remove dust using a blower brush.

6 RE-ATTACH EYEPIECE

Re-attach the eyepiece and turn it clockwise.

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mold may form if the lens is left dirty.

●When using a cleaner or chemically treated cloth, refer to the cautions that came with it.

●When removing the eyepiece, be sure to hold the viewfinder securely.

Image 50

Contents GR-AXM717UM English GR-AXM317UM GR-AXM217UM Dear Customer This unit is produced to comply with Standard IEC PublPoint where they exit from the product Slots and openings in the cabinet are provided forTo avoid personal injury If the product has been dropped or damaged in any wayQuick Operation Guide For more detailsZoom Zoom out Lithium Battery CR2025Nega/Posi 2000 sec. High Speed Shutter Cassette AdapterContents Attach Battery Pack PowerSupply Power Detach Battery PackEN9 DischargedRemove Battery Holder Clock Lithium Battery Insertion/RemovalSwitch OFF Power Insert Battery in HolderDate/Time Settings SET Recording Mode Recording Mode SettingTape Length Setting ContLoading/Unloading a Cassette Grip Adjustment Viewfinder AdjustmentTripod Mounting Adjust LengthShoulder Strap Attachment Attach StrapLoad a Cassette Power Switch PositionBasic Recording Start ShootingRecording Stop RecordingPress Display Button Before the following steps, perform pg Recording Basic RecordingShooting While Watching The LCD Monitor Brightness Control Journalistic ShootingInterface Shooting Zoom EN Recording Basic FeaturesPush the Power Zoom Lever towards T Feature Quick Review To check the end of the last recordingPress P. STABILIZER. appears Basic FeaturesFeature Picture Stabilizer Light OFF/AUTO/ON switch Feature Video Light GR-AXM717/AXM317 onlyTo brighten the scene when natural lighting is too dim Take Snapshot Recording Advanced FeaturesSnapshot GR-AXM717/AXM317 only If you press during Record-StandbyStart or END Recording Fade/WipeEngagemode FADE- or WIPE-STANDBY Program AE With Special Effects Advanced FeaturesSelect Mode Press P.AE to cycle through the modes as shown on the leftHigh shutter speed clearly captures fast-moving action Display ModeNega Posi mode Colors of a picture are reversedDate/Time Insert Press the Select Dial to display the Menu ScreenInstant Titles Access Title MenuSelect the Desired Mode END Setting Using Menu For Detailed AdjustmentMake Setting Menu Screen Available Using The Select Dial Menu Screen Available Using The Menu ButtonAllows you to set the current date and time pg Tally lamp comes on to signal the start of recordingDemo Mode is set to on and the Menu Screen is closed Recording pgAdjust Exposure Access Exposure MenuAccess Manual Exposure END Adjustment of ExposureFocusing Patterns that are regularly repeatedAdjust Focus Access Focus MenuAccess Manual Focus END Adjustment of FocusSET Function Parameters White Balance AdjustmentAccess White Balance Adjustment To Return To Automatic White BalanceSET Manual White Balance Enter SettingManual White Balance Operation To Change The Tint For RecordingStart Delayed Recording Self-TimerAccess INT. Time Menu To Cancel Self-TimerAnimation Time-LapsePlay Back Playback Basic PlaybackRewind or Fast-Forward the tape Stop PlaybackTracking Speaker Volume ControlAdjust Volume Activate Manual TrackingFeature Shuttle Search Playback FeaturesFeature Still Playback Feature Counter Memory FunctionCassette Adapter VHS Playpak Using The Cassette Adapter EN43Insert Battery Basic Connections When connecting the cables, open this coverBasic Connections And Tape Dubbing Connection For Tape DubbingTape Dubbing Functions Pull OUT Battery HolderRemote control uses one lithium battery CR2025 Buttons Animation Feature Self-Timer, Animation and Time-Lapse Self-Timer Time-LapseFind EDIT-OUT Point Reset CounterInsert Editing Begin Insert EditingEND Audio Dubbing Audio DubbingBegin Audio Dubbing Cleaning The Camcorder After UseAnimation or Time-Lapse is not No power is suppliedRecording does not start AvailableAn error number i.e. E03 appears Indicators and the picture colorReview or Retake mode During recording, the indications do not appearDisplayed and the tape remaining time warning Clock Battery WarningTape Remaining Time Condensation Warning54EN Tally Lamp Power Lamp Power Switch Battery Release SwitchDC in Jack Connectors w to r are located beneath the cover Clock Battery Slot Tripod Mounting SocketDigital Zoom Pg , 9Darken The LCD Monitor DubbingTo prevent damage and prolong service life To avoid hazardTo prolong service life For safety, do notAvoid using the unit During useGeneral ConnectorsProvided Accessories Optional Accessories GR-AXM217UM