JVC GR-AX840 manual Access Focus Menu, Access Manual Focus, Adjust Focus, END Adjustment of Focus

Select Dial

Display

FOCUS AUTO

EXPOSURE AUTO

WIDEOFF

S . LXOFF TITLE

DATE TIME DISP.

4RETURN

FOCUS

AUTO

MANU

EXIT

Power Switch

Menu Screen

FOCUS Menu

Manual Focus Screen

EN31

MANUAL FOCUS

NOTE:

You should already have made the necessary viewfinder adjustments (☞ pg. 14). If you haven’t, do so before continuing.

SELECT OPERATION MODE
1 Set the Power Switch to “PRO.”.
ACCESS MENU SCREEN
2 Press the Select Dial to display the Menu Screen.
ACCESS “FOCUS” MENU
3 Press the Select Dial.
ACCESS MANUAL FOCUS		RECORDING
5 To farther subject . . .
4 Rotate the Select Dial to move the highlight bar to
“MANU”, then press it. “ ” and “	” appear. The

focus is locked at this point.

ADJUST FOCUS

.... rotate the Select Dial upward. “” appears and

blinks.

Go to step 6.

To nearer subject . . .

.... rotate the Select Dial downward. “” appears

and blinks. Go to step 6.

6 END ADJUSTMENT OF FOCUS

Press the Select Dial. The Menu Screen reappears with the highlight bar on “RETURN”.

7 CLOSE MENU SCREEN

Press the Select Dial. The Menu Screen disppears and “ ” reappears to indicate the focus is locked.

NOTES:

●To return to Auto Focus, select “AUTO” in step 4.

●To re-adjust Manual Focus, repeat the procedure from step 2.

●Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a certain subject in the wide-angle position, sharply focused images cannot be obtained when zoomed in because the depth-of-field is reduced at longer focal lengths.

●When the focus level cannot be adjusted any farther or closer, “ ” or “ ” will blink.