JVC LYT0047-001A manual Quick Review, Retake, Picture Stabilizer

P. STABILIZER

RETAKE (R/F)

			EN	21
FEATURE:	Quick Review
PURPOSE:	To check the end of the last record-
	ing.
OPERATION:	1) Press “ ” and release quickly
	during the Record–Standby mode.
		Tape is rewound for about 2
		seconds and played back
		automatically, then pauses in
		Record–Standby mode for the
		next shot.
NOTE:	Distortion may occur at start of
	playback. This is normal.
FEATURE:	Retake
PURPOSE:	To re-record certain segments.
OPERATION:	1) Make sure the camcorder is in the
	Record–Standby mode.
	2) Press either RETAKE button to
	reach the start point for new
	recording. Pressing “F” forwards
	the tape and pressing “R” reverses
	it.
	3) Press Recording Start/Stop Button
	to start recording.
NOTE:	Noise may appear during Retake.
	This is normal.
FEATURE:	Picture Stabilizer
PURPOSE:	To compensate for unstable images
	caused by camera-shake, particularly
	at high magnification.
OPERATION:	1) Press P. STABILIZER. “ ”appears.
		To switch off the Picture
		Stabilizer, press P. STABILIZER.
		The indicator disappears.
NOTES:	Accurate stabilization may not be
	possible if hand shake is excessive,
	or under the following conditions:
	•When shooting subjects with
		vertical or horizontal stripes.
	•When shooting dark or dim
		subjects.
	•When shooting subjects with
		excessive backlighting.
	•When shooting scenes with
		movement in various directions.
	•When shooting scenes with low-
		contrast backgrounds.
	Switch off the Picture Stabilizer
	when recording with the
	camcorder on a tripod.