JVC LYT0002-0X9A Manual White Balance Operation, Enter Setting, To Change The Tint For Recording

48EN

RECORDINGAdvanced Features (Cont.)

Manual White Balance Operation

If the camera is operating in manual mode, perform a Manual White Balance when shooting under various types of lighting

Display

	FOCUS	AUTO
	EXPOSURE	AUTO
4	W. BALANCE	AUTO
	FADER	OFF
	/ WIPE
	P. AE	OFF
	/ EFFECT	0
	FLASH ADJ.

RETURN

Manual Mode

Item Menu

White paper

Lock button

Power Dial

5S
M	OFFYA
A		P
	L

MANUAL

Select Dial

Manual White Balance

Adjustment

1 SELECT OPERATION MODE

Follow steps 1 through 4 of the white balance adjustment (☞ pg. 47), select “ MAN.”.

2 SET MANUAL WHITE BALANCE Hold a sheet of plain white paper in front of the subject. Adjust zoom or position yourself so that the white paper fills the screen.

3 ENTER SETTING

Press the Select Dial until the begins blinking.

•When the setting is completed, the stops blinking.

4 EXIT MANUAL WHITE BALANCE ADJUSTMENT

Press the Select Dial. The indication “W.BAL” changes to “MANUAL” and only the Manual White Balance indicator is displayed.

To Change The Tint For Recording . . .

.... In step 2, substitute coloured paper for white. The

white balance is adjusted based on the colour, changing the tint. Red paper — deeper green; blue paper — orange; yellow paper — deeper purple.

NOTES:

●A subject can be shot under various types of lighting conditions indoors (natural, flourescent, candlelight, etc.). Because the colour temperature is different depending on the light source, the tint of the subject will differ depending on the white balance settings. Use this function for a more natural result.

●Once you adjust white balance during Manual White Balance operation, the setting is retained even if the power is turned off or the battery removed.