JVC LYT0002-0P7A manual Cassette Warning/Remaining, Lights. Otherwise, the Remaining Tape Time is

46EN

INDEX Viewfinder

7

8

9

0

!

@

#

$

1	2	3	45 6
18min		Disp.	30	%
REC	Sepia			^
			– 05	&
				*
		AUTO	MWB
		PAUSE		(
1min		APS ON	INDEX	)
1/2s	TAPE END			q
Merry Christmas				w
25. 12. 97		10 : 45 : 56

Viewfinder Indications

1 Cassette Warning/Remaining	☞ pg. 11
Tape Time
When no cassette is inserted: the Cassette (		)
Warning blinks.
When Erase Protection tab is not in the position
that allows recording: the Cassette (	) Warning
lights. Otherwise, the Remaining Tape Time is
displayed.
2, 8 PROGRAM AE Indicator	☞ pg. 14
Displayed at 2 for approx. 1 second when the
PROGRAM AE select dial is switched from one
position to another. Then only the indicator
remains at 8.
2, 9 Fade/Wipe Standby Indicator	☞ pg. 19

Displayed at 2 for approx. 2 seconds when the Fade/Wipe is switched from one function to another by pressing the SET button. Then only the indicator remains at 9.

3 Program Manager Function	☞ pg. 19
Indication
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
4 Recording Format Indicator	☞ pg. 8
5 Tape Length Display	☞ pg. 8
6 Zoom Indicator Bar	☞ pg. 12
7 Recording Indicator	☞ pg. 11
0 Picture Stabilizer Indicator	☞ pg. 18
! Interval Time/Recording Time	☞ pg. 26
Indicator
@ •Record–Standby Mode Indicator	☞ pg. 11
•Lens Cover Warning:	☞ pg. 11
LENS COVER
•Auto Pause System Indicator	☞ pg. 13
# Instant Titles Display	☞ pg. 20
$ Date/Time Character Display	☞ pg. 22

%Battery Pack Remaining Power Indicator

Changes as follows according to the battery pack’s

remaining power level: “”. When the power is almost gone, the indicator blinks, then the unit shuts off. Replace the battery pack with a fully charged one.

(Note: The symbol containing 3 darkened

squares — — does not necessarily mean that the battery pack is fully charged.)

^ Focus Indicator	☞ pg. 16
& Exposure Level Indicator	☞ pg. 18
* White Balance Mode Indicator	☞ pg. 23
( Menu Setting Change Indicator	☞ pg. 24
) Index Code Marking	☞ pg. 39
q Clock Warning

Once the power is turned on and the indicator blinks for about 10 seconds, perform the date and time settings (☞ pg. 7). After setting is complete, turn the power off and disconnect the power source. If you re-connect it and turn the power on and the indicator is blinking, that means that the clock (lithium) battery is either not installed or has discharged. Install, or replace the old battery with, a new one (☞ pg. 6).

w • Tape End Display: TAPE END ........... ☞ pg. 11

Appears when the end of the tape is reached during playback, recording or fast-forward.

•Condensation Warning:

When this indication appears, all functions are disabled. Turn the unit off (without removing the power source) for a few hours, and when you turn it on again the indicator should disappear.