JVC LYT0193-001B specifications Access Playback Menu, Close Menu

50ENPLAYBACK

Playback Menu

AdvancedFeatures(Cont.)

The Playback Menu allows you to set the following functions:

Playback Sound (32 kHz, 48 kHz), Synchro Comp, Display and Time Code. The following procedure applies to all except Synchro Comp (☞ pg. 64, 65).

Display

			FULL SOUND
			SOUND2
	48kHz MODE	FULL SOUND	SOUND1
	32kHz MODE	SOUND1
	SYNCHRO	0 . 0		ON
	DISPLAY	ON
	TIMECODE	OFF		OFF
			ON
4	END		OFF

Playback Menu

FULL SOUND SOUND2 SOUND1

4		FULL SOUND
	48kHz MODE
	32kHz MODE	SOUND1
	SYNCHRO	0 . 0
	DISPLAY	ON
	TIMECODE	OFF
	END

Select Dial

1 SELECT OPERATION MODE First turn the Power Dial to “PLAY” while pressing down the lock button located on the dial. Pull out the viewfinder fully.

2 ACCESS PLAYBACK MENU

Press MENU. The Playback Menu appears in the viewfinder and on the connected TV.

3 SELECT FUNCTION

Move the pointer and highlight bar to the desired function by rotating the Select Dial. Press the Select Dial to activate.

A M	5S	Power Dial
OFF
Y
A
L
P

Lock button

MENU button

4 SET FUNCTION PARAMETERS Rotate the Select Dial to cycle through the available settings for the selected function, and stop when the desired setting appears. Then press the Select Dial, and the pointer and highlight bar automatically move to “END”.

•To set parameters for other functions, repeat steps 3 and 4.

5 CLOSE MENU

Press the Select Dial again, and the menu disappears.