42
EN 
INDEX
Viewfinder
1 | 2 3 | 4 | 5 | 6 7 |
8
9
0
!
@
#
$
18MIN | DISP. | T30 | % | |
REC SP | SEPIA |
| ^ | |
|
| & | ||
| LENS COVER | – 05 | ||
| * | |||
FADE |
| MWB | ||
1MIN | PAUSE | INDEX | ( | |
| ) | |||
1/2S | TAPE END |
| q | |
|
| w | ||
MERRY CHR ISTMAS | e | |||
25 . 12 . 97 | 10 : 24 | |||
| ||||
Viewfinder Indications
1 Cassette Warning/Remaining | ☞ pg. 10 |
Tape Time |
When no cassette is inserted or when Erase Protection tab is not in the position that allows recording, the Cassette (
) Warning blinks. Otherwise, the Remaining Tape Time is displayed.
2 Recording mode [SP/LP] indicator | ☞ pg. 8 |
3, 9 PROGRAM AE Indicator | ☞ pg. 14 |
Displayed at 3 for approx. 1 second when the PROGRAM AE select dial is switched from one position to another. Then only the indicator remains at 9.
4 Program Manager Function | ☞ pg. 18 |
Indication | |
Appears when the PROGRAM AE select dial is | |
set to any position other than AUTO LOCK. | |
5 Lens Cover Warning | ☞ pg. 10 |
6 Tape Length Display | ☞ pg. 8 |
7 Zoom Level Indicator | ☞ pg. 11 |
8 Recording Indicator | ☞ pg. 10 |
0 | ☞ pg. 18 |
! Interval Time/Recording | ☞ pg. 24 |
Time Indicator | |
@ | ☞ pg. 10 |
# Instant Title Display | ☞ pg. 19 |
$ Date/Time Character Display | ☞ pg. 20 |
%Battery Pack Remaining Power Indicator Changes as follows according to the battery pack’s
remaining power level: “
”. When the power is almost gone, the indicator blinks, then the unit shuts off. Replace the battery pack with a fully charged one.
(Note: The symbol containing 3 darkened
squares — 
— does not necessarily mean that the battery pack is fully charged.)
^ Focus Indicator | ☞ pg. 16 |
& Exposure Level Indicator | ☞ pg. 15 |
* White Balance Mode Indicator | ☞ pg. 21 |
( Menu Setting Change Indicator | ☞ pg. 22 |
) Index Code Marking | ☞ pg. 35 |
q Clock Warning
Displayed for about 5 seconds if the clock (lithium) battery is not in place or is exhausted when power is turned on. Also displayed for about 5 seconds when clock battery becomes exhausted while using the camcorder.
For inserting or replacing the clock | ☞ pg. 6 |
battery |
w Condensation Warning
When this indication appears, all functions are disabled. Turn the unit off (without removing the power source) for a few hours, and when you turn it on again the indicator should disappear.
e Tape End Display ............................... ☞ pg. 10
Appears when the end of the tape is reached during playback, recording or