INDEX Viewfinder 
37
1 | 23 | 4 | 5 | 6 7 |
8
9
0
!
@
#
$
18MIN | DISP. | T30 | % |
REC SP | SEPIA |
| ^ |
|
| & | |
| LENS COVER | – 05 | |
| * | ||
FADE |
| MWB | |
1MIN | PAUSE |
| ( |
|
| ) | |
1/2S |
|
| |
|
|
|
|
|
|
| TAPE END |
|
|
|
|
|
| q |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||
|
|
| MERRY CHR ISTMAS |
|
| w | |||||
|
|
|
|
| |||||||
|
| 25. 12. 97 | 10 : 24 |
|
|
|
| ||||
Viewfinder Indications
1 Cassette Warning/Remaining | ☞ pg. 12 | ||
Tape Time | |||
When no cassette is inserted or when Erase | |||
Protection tab is not in the position that allows | |||
recording, the Cassette ( |
| )Warning blinks. | |
| |||
Otherwise, the Remaining Tape Time is dis- | |||
played. |
| ||
2 Recording Mode (SP/LP) Indicator | ☞ pg. 10 | ||
3, 9 PROGRAM AE Indicator | ☞ pg. 14 | ||
Displayed at 3 for approx. 1 second when the PROGRAM AE select dial is switched from one position to another. Then only the indicator remains at 9.
4 Program Manager Function | ☞ pg. 18 |
Indication | |
Appears when the PROGRAM AE select dial is | |
set to any position other than AUTO LOCK. | |
5 Lens Cover Warning | ☞ pg. 12 |
6 Tape Length Display | ☞ pg. 10 |
7 Zoom Level Indicator | ☞ pg. 13 |
8 Recording Indicator | ☞ pg. 12 |
0 | ☞ pg. 18 |
! Interval Time/Recording | ☞ pg. 24 |
Time Indicator | |
@ | ☞ pg. 12 |
# Instant Title Display | ☞ pg. 19 |
$ Date/Time Character Display | ☞ pg. 20 |
%Battery Pack Remaining Power Indicator Changes as follows according to the battery pack’s remaining power level:
“
”. When the power is almost gone, the indicator blinks, then the unit shuts off. Replace the battery pack with a fully charged one.
(Note: The symbol containing 3 darkened
squares — 
— does not necessarily mean that the battery pack is fully charged.)
^ Focus Indicator | ☞ pg. 16 |
& Exposure Level Indicator | ☞ pg. 15 |
* White Balance Mode Indicator | ☞ pg. 21 |
( Menu Setting Change Indicator | ☞ pg. 22 |
) Condensation Warning
When this indication appears, all functions are disabled. Turn the unit off (without removing the power source) for a few hours, and when you turn it on again the indicator should disappear.
q Clock Warning
Displayed for about 5 seconds if the clock (lithium) battery is not in place or is exhausted when power is turned on.
Also displayed for about 5 seconds when clock battery becomes exhausted while using the camcorder.
For inserting or replacing the clock battery. (☞ pg. 8)
w Tape End Display ................................ ☞ pg. 12
Appears when the end of the tape is reached during playback, recording or