JVC LYT0002-020B After Use, Cleaning The Camcorder, Clean Exterior, Clean Lens, Clean Viewfinder

Page 34

34

LENS COVER open/close switch

Set to “POWER OFF”

BATT. RELEASE

USERMAINTENANCE

After Use

1 Set the Power switch to “POWER OFF” to turn off the camcorder.

2 Slide EJECT to open the cassette holder, then remove the cassette.

3 Close and lock the cassette holder by pressing PUSH.

4 Press BATT. RELEASE to remove the battery pack.

5 Slide the LENS COVER open/close switch to close the lens cover.

PUSH

EJECT

Remove

Marks

Cleaning The Camcorder

CLEAN EXTERIOR

1 Wipe gently with a soft cloth.

CLEAN LENS

2 Blow it with a blower brush, then wipe gently with lens cleaning paper.

CLEAN VIEWFINDER

3 1 Turn the eyepiece counterclockwise and pull it out.

2 Remove dust using a blower brush.

3 Align the marks, re-attach the eyepiece and turn it clockwise.

NOTES:

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mould may form if the lens is left dirty.

Image 34

Contents GR-AX270 It is recommended that you Dear CustomerConnection to the mains supply in the United Kingdom Some DO’S and DON’TS on the Safe USE of Equipment This unit is produced to comply with Standard IEC PublZoom-in AC Power Adapter Cassette AdapterZoom-out Eject BATT. ReleaseStop 2REW PLAY/PAUSE Attach Battery Pack PowerSupply Power Detach Battery PackCar Battery Charger/Adapter BH-V3E optional AA-V11EKViewfinder Adjustment Menu Start Clock OperationClose Menu NearRecording Mode Setting Tape Length SettingLoading/Unloading a Cassette Shoulder Strap Attachment Grip AdjustmentTripod Mounting Start Shooting Enter RECORD-STANDBY ModeLoad a Cassette Stop RecordingPurpose Retake R/F FeatureOperation Dial Viewfinder Mode Viewfinder ModeIndication Brighten Image Restore Initial SettingExposure Control Darken ImageRelease Focus Lock FocusingLock Focus FAR NearPower zoom lever Fader WideInstant Titles Character GeneratorSelect Display Choose Display ModeDate/Time Character Insert SelectWhite balance mode indicator Adjust FocusAdjust White Balance Select White BalanceSetting procedure depends on the function you select Using Menu For Detailed AdjustmentMake Setting Press MENU. The normal screen reappearsNorm Interval Timer OFFGain UP OFFInterval Timer Indicator Menu + Near FARAnimation Time-LapsePlay Back on Connected VCR Cassette AdapterInsert Cassette in Adapter Remove Cassette from AdapterConnect Camcorder to VCR Connect Camcorder to TVPlayback PLAY/PAUSE REW FF Stop PowerRewind or Fast-forward the tape Stop PlaybackCounter R/M PLAY/PAUSE Stop REW FF Feature When connecting the cables, open the jack cover Power switchTo Audio Video OUT connectors Video in connectors Operate the VCR Random Assemble Editing R.A.EditSET Remote to Operate VCR Connect toPrepare VCR Access R.A. Edit Counter DisplayPrepare Camcorder Register Beginning of SceneEND Automatic Editing Begin Automatic EditingEdited Tape VCR Stop Clean Lens Cleaning The CamcorderClean Exterior Clean ViewfinderSymptom Finder, consult your nearest JVC dealer Review or Retake modeOn again. If the error number still appears in the view Image is out of focusIndex Viewfinder Otherwise, the Remaining Tape Time is disTracking + Push Button Eject Switch Power Switch Pg.12Counter R Reset/M Memory Tape Length T304560Battery Pack Mount Tally Lamp Power On IndicatorLens Cover Switch Grip Strap Tripod Mounting Socket Diopter Adjust Auto Mode Lock Mode Auto Mode Release ModeDate/Time Setting Grip AdjustmentDo not modify or disassemble Use only specified chargers Do not burnMake sure the cassette bears the VHS-C mark Special Notes on Video Heads Dimensions 188 25 H 104 Weight Approx g Accessory Adjustment Auto/Manual adjustmentOut connector Output DBs, 1 k-ohm via Audio out connectorGR-AX270