42
LENS COVER open/close switch
Set to “POWER OFF”
BATT. RELEASE
USERMAINTENANCE
After Use
1 Set the Power switch to “POWER OFF” to turn off the camcorder.
2 Slide EJECT to open the cassette holder, then remove the cassette.
3 Close and lock the cassette holder by pressing PUSH.
4 Press BATT. RELEASE to remove the battery pack.
5 Slide the LENS COVER open/close switch to close the lens cover.
PUSH
EJECT
Remove
Marks
Cleaning The Camcorder
CLEAN EXTERIOR
1 Wipe gently with a soft cloth.
CLEAN LENS
2 Blow it with a blower brush, then wipe gently with lens cleaning paper.
CLEAN VIEWFINDER
3 1 Turn the eyepiece counterclockwise and pull it out.
2 Remove dust using a blower brush.
3 Align the marks,
NOTES:
●Avoid using strong cleaning agents such as benzine or alcohol.
●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.
●Mould may form if the lens is left dirty.