JVC LYT0002-048A PLAYBACK Features, Counter R/M Play/Pause Stop Rew Ff, Manual Tracking, Purpose

PLAYBACK Features

+

–

COUNTER R/M PLAY/PAUSE

STOP

REW FF

	33
FEATURE:	Manual Tracking
PURPOSE:	To eliminate noise bars that appear
	on the screen during playback.
OPERATION:	1) Press either +/– button as many
	times as necessary for best picture.
NOTES:	● To reset TRACKING to the original
	preset, press both + and – buttons
	simultaneously.
	● Manual Tracking may not work
	with tapes recorded on other VCRs
	or camcorders.
FEATURE:	Still Playback
PURPOSE:	To pause during playback.
OPERATION:	1) Press PLAY/PAUSE during
	playback.
	2) To resume normal playback, press
	PLAY/PAUSE again.
NOTE:	Noise bars appear and pictures may
	become monochrome during Still
	Playback. This is normal.
FEATURE:	Shuttle Search
PURPOSE:	To allow high-speed search in either
	direction.
OPERATION:	Forward Search
	1) Press FF during playback.
	Reverse Search
	1) Press REW during playback.
NOTE:	Noise bars appear and pictures may
	become monochrome or darken in
	Shuttle Search. This is normal.
FEATURE:	Counter Memory Function
PURPOSE:	To make it easier to locate a specific
	tape segment.
OPERATION:	1) Press COUNTER R/M and hold for
	more than 2 seconds. The counter
	resets to “0:00:00”.
	2) Press COUNTER R/M less than 1
	second. “M” appears.
	3) After recording or playback, press
	STOP, then REW. The tape
	automatically stops at or close to
	0:00:00.
	4) Press PLAY/PAUSE to start
	playback.
NOTES:	● The counter memory functions in
	the FF and REW modes.
	● To disable Counter Memory
	Function, press COUNTER R/M
	less than 1 second so the “M”
	disappears.