JVC GR-AX1010 manual Connection To a VCR a Editing, Dubbing and Playback, Connect Camcorder to VCR

PLAYBACK Basic Connections 37

There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.

Connection To A VCR [A]

(Editing, Dubbing and Playback)

NOTE:

Use the optional Audio and Video cables.

To AUDIO and VIDEO connectors

A

VCR

Antenna

CONNECT CAMCORDER TO VCR

Audio and Video	As shown in the illustration at left, connect the
cables (optional)
	1 optional Audio and Video cables between the
	AUDIO and VIDEO connectors on the camcorder

Band those on the VCR.

To AUDIO and SUPPLY POWER

VIDEO IN	2	Turn on the camcorder, the VCR and the TV.
connectors

SELECT MODE

3 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode or channel 3.

Connection To A TV With A/V Input

Connectors [B] (Playback ONLY)

NOTE:

Use the optional Audio and Video cables.

RF unit RF-V5U(optional)

To AUDIO, VIDEO and DC OUT connectors

CONNECT CAMCORDER TO TV

1 As shown in the illustration at left, connect the optional Audio and Video cables between the AUDIO and VIDEO connectors on the camcorder and those on the TV.

NOTES:

●It is recommended to use the AC Power Adapter/Charger as the power supply instead of the battery pack.

●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power switch to “CAMERA”, then set your TV to the appropriate input mode.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

SELECT MODE

2 Set the TV to its VIDEO or AV mode (as specified in its instructions).

Connection To A TV With NO A/V Input Connectors (Playback ONLY)

NOTE:

Use the optional RF-V5U RF unit.

*Refer to the RF-V5U instruction manual for connection procedure.