EN 19
Turn on the VCR and the TV, and select the AV mode on the TV.
VCR TV CABLE/DBS
1 2 3
4 5 6
7 8 9
0
Setting DBS receiver output channel & brand
After installation, set the DBS receiver’s output channel and its brand correctly; otherwise, the Controller cannot work correctly.
1 Turn on DBS receiver
Select a channel other than channel 55, 100 or 205 on your DBS receiver.
2Access Main Menu screen on VCR
Press MENU.
3Access Tuner Set Up screen
Press %Þ to move the highlight bar (arrow) to “TUNER SET UP”, then press OK.
4 |
Access DBS Receiver Set screen
34 | 5 |
| |
2 | 34 |
Press %Þ to move the highlight bar (arrow) to
“DBS RECEIVER SET UP”, then press OK.
TUNER SET UP
BANDCATV AUTO CHANNEL SET UP MANUAL CHANNEL SET GUIDE CHANNEL SET CABLE BOX SET UP
3DBS RECEIVER SET UP PRESS (5°), THEN (OK)
PRESS (MENU) TO END
5 |
Select DBS receiver output channel
Your selection depends on how your DBS receiver is connected to your VCR.
● If your DBS receiver is connected to your VCR’s ANTENNA IN terminal on the rear panel
Press @ # until the channel number representing the DBS
receiver’s output (CH3 or CH4) appears on the screen.
●If your DBS receiver is connected to your VCR’s AUDIO/VIDEO IN connectors on the front panel Press @ # until “ON
●If your DBS receiver is connected to your VCR’s AUDIO/VIDEO IN
Press @ # until “ON
●If you do not use a DBS receiver
Press @ # until “OFF” appears on the screen.