JVC LYT1393-001A manual Make sure all units are turned off, Start playback on the player, To USB

Set the camcorder’s Power Switch to “PLAY”. Set “REC MODE” to “SP” or “LP”. (
pg. 42)

54 EN EDITING

To use this camcorder as a player NOTES:

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.

3 Start playback on the camcorder. (
pg. 22)

4 At the point you want to start dubbing, start recording on the video unit. (Refer to the video unit’s instruction manual.)

5 To stop dubbing, stop recording on the video unit, then stop playback on this camcorder.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. (
pg. 15)

●If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

●Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again.

●If “Playback Zoom” (
pg. 27) or “Playback Special Effects” (
pg. 27) is attempted or SNAPSHOT is pressed during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector.

●When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.

To use this camcorder as a recorder

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.

3

4

5 Press the Recording Start/Stop Button to engage the Record-Pause mode.

●The “ DV IN ” indication appears on the screen.

6 Start playback on the player.

7 At the point you want to start dubbing, press the Recording Start/Stop Button to start

dubbing. The indication rotates.

8 Press the Recording Start/Stop Button again

to stop dubbing. The indication stops rotating.

9 Press 8 to return to the normal playback mode.

●If no image is displayed on the LCD monitor, set “S/AV INPUT” to “OFF”. (
pg. 37, 42)

●Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting. (
pg. 38)

Connection To A Personal Computer

[A] Using USB cable [B] Using DV cable

OR

To USB

	To DV IN/OUT
	Core filter
USB cable	DV cable
	(optional)
(provided)
	Core filter
To USB	To DV connector
connector

PC PC with DV connector