Whirlpool RF396PXY, RF396PCY manual Method 2-Using Start Time and Stop Time

6.Push the Start/Enter pad. DELAY and BAKE will light up in the display to indicate that the oven is programmed to start at a later time.

NOTE: The display will show “door”and a tone will sound once a minute for 5 minutes if the door ls latched when you try to bake/ roast.

You can change the temperature or time settings any time after pushing the Start/Enter pad without pushing the Start/Enter pad again.

9.When the start time is reached, a one-second tone will sound and DELAY will go off. The display will show the set cook time. Lo’, HEAT, TIMED and BAKE will light up in the display to show that the oven is heating. The display will count down the baking/roasting time in minutes.

10.When the bakfng/roasting time is corqleted, the oven will turn off automatically, beep four times and ‘End’ will show in the display. You will also hear four 1-second tones every minute until you push the Off/Cancel pad.

NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure.

To cancel the MEALTlMER”,control setting:

lPush the Off/Cancel pad to return the display to the time of day.

Method 2-Using Start Time and Stop Time:

1.Position the oven rack(s) properly and put food in the oven.

2.Make sure the clock is set to the correct time of day. (See setting the clocK on page 12.1

3.Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature. Push A to raise the temperature or V to lower the temperature in 5°F incre- ments. Use these pads until the desired temperature shows in the small display.

After you have set the desired temperature, the display will show the set temperature and the time of day. BAKE will light up.

22