Whirlpool RF396PCY, RF396PXY manual Method Z-UsingStop Time

Models: RF396PCY RF396PXY

1 40
Download 40 pages 20.01 Kb
Page 19
Image 19
Method Z-Using Stop Time:

6.Push the Start/Enter pad. IO’“, HEAT, BAKE, TIMED and the set cook time will show in the display to indicate that the oven is heating.

NOTE: The display will show “doof and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/roast.

You can change the temperature or time settings any time after pushing the Start/Enter pad without pushing the Start/Enter pad again.

7.The display will count down the baking/ roasting time in minutes.

6.When the baking’roasting time is completed, the oven will turn off automatically, beep four times and “End”will show in the display. You will also hear four 1-second tones every minute until you push the Off/Cancel pad.

NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure.

To cancel the MEALTIMER” control setting:

lPush the Off/Cancel pad to return the display to the time of day.

Method Z-Using Stop Time:

1.Position the oven rack(s) properly and put food in the oven.

2.Make sure the clock is set to the correct time of day. (See “Settingthe cloclc on page 12.)

3.Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature. Push A to raise the temperature or V to lower the temperature in 5°F incre- ments. Use these pads until the desired temperature shows in the small display.

After you have set the desired temperature, the display will show the set temperature and the time of day. BAKE will light up.

19

Page 19
Image 19
Whirlpool RF396PCY, RF396PXY manual Method Z-UsingStop Time