Whirlpool RF396PXY To delay start and stop automatically, Method l-UsingCook Time and Start Time

4.Push the Stop Time pad. The time of day with the colon flashing and STOP TIME will show in the display.

5.Use the Hour and Minute pads to set the desired stop time. Push the “up”(A) or “down”

(V)pad(s) until the correct time shows in the display.

This example shows a desired stop time of 2 o’clock. This provides a e-hour cook time (the difference between the time of day and the stop time).

6.Push the Start/Enter pad. “Lo”“,HEAT, TIMED and BAKE will light up in the display to indicate that the oven is heating.

NOTE: The display will show “door” and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/roast.

You can change the temperature or time settings any time after pushing the Start/Enter pad without pushing the Start/Enter pad again.

7.The display will count down the baking/ roasting time in minutes.

6.When the baking/roasting time is completed, the oven will turn off automatically, beep four times and “End” will show in the display. You will also hear four 1-second tones every minute until you push the Off/Cancel pad. NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure.

To cancel the MEALTIMER” control setting:

l Push the Off/Cancel pad to return the display to the time of day.

To delay start and stop automatically

Method l-Using Cook Time and Start Time:

1.Position the oven rack(s) properly and put food in the oven.

2.Make sure the clock is set to the correct time of day. (See “Setting the clock” on page 12.)

20