Panasonic DMR-E80H Manually programming timer recordings, Press PROG/CHECK or Return

Manually programming timer recordings

You can enter up to 32 programs up to a month in advance. Each daily or weekly program is counted as one program.

1 Press [PROG/CHECK].

4 Press [ENTER] when you have finished programming the timer.

TIMER			Remain HDD 17:36 SP				DVD 1:42 SP
RECORDING
						3/26 TUE 12:55 PM		Displayed if the
No	CHANNEL		DATE	ON	OFF	MODE	DRIVE CHECK
								recording can fit
01	64	ABC	3/ 26 TUE	1:00 PM	2:00 PM	SP	Enable
02	64	ABC	3/ 26 TUE	2:30 PM	3:00 PM	SP	Enable	in the remaining

A line that is ready for programming is highlighted.

TIMER		Remain HDD 17:36 SP				DVD 1:42 SP
RECORDING
					3/26 TUE 12:55 PM
No	CHANNEL	DATE	ON	OFF	MODE	DRIVE CHECK
01	64 ABC	3/ 26 TUE	1:00 PM	2:00 PM	SP	Enable
		New Timer Program

SELECT

CANCEL Press ENTER or VCR Plus+ to

ENTER RETURN store new program

New Timer Program

space on the

disc.

≥Press [3, 4] to select “New Timer Program” and repeat steps 2- 4 to program other recordings.

5 Press [PROG/CHECK] or [RETURN].

The timer recording list disappears and the unit enters Timer Recording standby mode (“F” appears on the unit display).

≥The unit is not off. To save power, turn the unit off by press-

ing [Í, DVD POWER].

2 Press [ENTER].

TIMER		Remain HDD 17:36 SP DVD				1:42 SP
RECORDING
					3/26 TUE 12:55 PM
	CHANNEL	DATE	ON	OFF	MODE	DRIVE
	3	----------	--:-- --	--:-- --	--	---
	----4
					Enter Title
		Please set Channel.
SELECT				No.
			0	-- 9
ENTER	RETURN

3 Press [1] to move through the items

and change the items with [3, 4].

≥The current settings are shown each time you press [1].

≥You may use the numbered buttons to enter the CHANNEL, DATE, ON (start Time), and OFF (Finish Time).

TIMER
RECORDING	Remain HDD	17:36 SP	DVD	1:42 SP
		3/26 TUE 12:55 PM
CHANNEL DATE	ON	OFF MODE		DRIVE

64 ABC 3/ 26 TUE 2:30 PM 3:00 PM SP HDD

Enter Title

≥CHANNEL (Channel number and caption)

≥DATE

[.Current date

l;:

lNext day up to one month later minus one day

l;:

lWeekly timer: SUN-SAT>MON-SAT>MON-FRI

l;:

{.Daily timer: WEEKLY SUN>--->WEEKLY SAT

≥ON (Start time)/OFF (Finish time)

The time increases or decreases in 30-minute increments if you hold the button.

≥MODE (Recording mode ➜ page 15)

SP>XP>FR>EP>LP (>Return to SP)

≥DRIVE HDD()DVD

≥RENEW

(Only when you set daily or weekly recording onto HDD

➜ page 26, Auto Renewal Recording) ON()OFF

≥Enter Title

Select “Enter Title” using 2[ , 1] and press [ENTER] (➜ page 38).

To release the unit from recording standby

Cancel all the timer recording programs using [CANCEL]

(➜ page 27).	recording
To stop recording when recording has already
begun
Press [∫], then [ENTER] within 5 seconds.
Recording stops.	Timer
[Note]
≥When the program timer reaches the set time when in record-
ing standby mode, timer recording will start even if the unit is
playing or recording another program.
≥The actual time recorded may be longer than the program itself
when television programs are recorded using VCR Plusi.
≥If you don’t select a recording mode when using VCR Plus+
codes to make a timer recording, the unit sets the mode
selected on the unit at that time (unless the mode is “XP”, in
which case the unit sets “FR” as the mode).
≥“All timer programs are occupied.” appears if there are
already 32 programs.
≥The remaining time displayed is based on the current record-
ing mode.
≥When you program successive timer recordings to start
immediately one after the other, the unit cannot record the
part at the beginning of the later programs (a few seconds
when recording with HDD or DVD-RAM, and approximately
30 seconds when recording with DVD-R).
≥If you set DST (Daylight Saving Time) to ON when manually
setting the clock (➜ page 47), timer recording may not work
when summer switches to winter and vice versa.

≥“F” flashes when the unit couldn’t go to timer recording standby.

≥When timer recording starts, the record lamp (➜ page 13, Main unit) lights, even if the unit is off.

Relief Recording

When the recording drive is set to “DVD” for timer recording, the unit will automatically evaluate if the program will fit onto the disc before beginning recording. If the program will not fit then the recording drive will be altered to “HDD” automatically.

≥If the time remaining on the HDD is insufficient, as much of the program as possible will be recorded onto the HDD.

≥If there is no disc in the tray or the disc cannot be recorded on, the recording drive will be altered to HDD.

≥The recording mode will not be altered.

≥The Direct Navigator shows which programs were relief- recorded (➜ page 19).

25

RQT6984