Aiwa NSX-TR77 manual Timer Operations, Sleep timer, Timer playback, To cancel the sleep timer

TIMER OPERATIONS

En

Sleep timer

Turns off the unit automatically after a specified time.

1Press SHIFT+SLEEP on the remote control. "SLP" appears on the display.

2Press f or g repeatedly to set the sleep timer duration.

With each press, the timer duration changes in 5-minute steps between 5 to 240 minutes. If there is no button input for 6 seconds, the current setting is entered automatically.

The unit turns off after the selected time.

•MULTI JOG is also available in place of for g.

Tip:

The display is dimmed while the sleep timer is active.

To check the remaining time until the unit turns off

Press SHIFT+SLEEP on the remote control. The remaining time is displayed for 6 seconds.

To cancel the sleep timer

Press SHIFT+SLEEP twice on the remote control so that "SLP OFF" is displayed.

Timer playback

Turns on the unit at a specified time for the specified duration. Make sure the clock is set correctly.

1Press SHIFT+TIMER on the remote control to display " PLAY".

On the unit, press MODE repeatedly to display

"TIMER", and press ENTER within 4 seconds. Then turn MULTI JOG within 6 seconds to select " PLAY", and press ENTER within 4 seconds.

2Press for gto set the timer-on time, then press ENTER or aSET.

If for gis not pressed within 6 seconds, you will exit the timer setting mode and the previous setting, however, is entered.

3Press f or g to select the source, then press ENTER or aSET.

4Press f or g to set the timer-activated duration, then press ENTER or aSET.

With each press, the timer-activated duration changes in 5-minute steps between 5 to 240 minutes.

5Press f or g to adjust the volume level for timed playback, then press ENTER or aSET. Adjustable range: 0 to 18

6Prepare the source.

To play CD(s), load disc(s).

To play the radio, select the band and tune in to the desired station.

To play a tape, insert the tape and select the deck.

To play external equipment connected to the VIDEO/AUX jacks, set an external timer for the equipment so that its playback begins at the same time.

7Press POWER 6STANDBY/ON to turn the unit off.

At timer-on time, the unit turns on and plays the selected source. After the specified timer-activated duration, the unit turns off again.

Tip:

The display is dimmed while the timer playback is active.

•To stop timer setting in step 2 to 5, press s. Timer standby mode is also canceled.

•Timer playback will not begin unless the unit is turned off first.

•Connected equipment cannot be turned on or off by the built-in timer of this unit. Use an external timer.

•MULTI JOG is also available in place of for g. •In step 3, TAPE, TUNER, VIDEO/AUX, CD or FUNCTION

is also available to select the source.

In step 5, VOLUME +,-or VOLUME is also available to adjust the volume level.

18